La Crosse Technology 327-1417BW Abmessungen

La Crosse Technology, Ltd. Page 1

327-1417BW FAQS

The links below will work in most PDF viewers and link to the topic area by clicking

the link. We recommend Adobe Reader version 10 or greater available at:

http://get.adobe.com/reader

TABLE OF CONTENTS

327-1417BW FAQS..................................................................................................... 1

Batteries......................................................................................................................... 2

Weather Station Factory Restart......................................................................... 2

Battery Change............................................................................................................ 2

Power requirements.................................................................................................. 3

Compatible Sensors................................................................................................... 3

Add-on Sensors........................................................................................................... 3

Wind/Thermohygro Sensor.................................................................................... 3

Dashes shown for outdoor temperature/humidity/Wind Speed ......................... 3

Inaccurate outdoor temperature/humidity.............................................................. 4

Outdoor Readings are stuck or OFL........................................................................... 4

Intermittent Sensor Readings..................................................................................... 4

sensor drains batteries quickly................................................................................... 4

Fahrenheit/Celsius......................................................................................................... 5

HI | LO Temperature/Humidity Records................................................................... 5

Reset HI | LO Temperature/Humidity Records....................................................... 5

Wind Cups spinning slow or not spinning ................................................................ 5

Replace wind cups ......................................................................................................... 5

Wind speed is 0.00........................................................................................................ 6

Wind speed is inaccurate ............................................................................................. 6

Understanding wind readings...................................................................................... 6

Reset Wind Speed History ........................................................................................... 7

Sensor area is blank (no dashes or numbers)........................................................ 7

Alerts: Wind, Temp, humidity..................................................................................... 7

Active Alert ................................................................................................................... 8

Frost and Storm Warnings ..................................................................................... 8

Mounting/Positioning............................................................................................... 9

Distance/Resistance/Interference.............................................................................. 9

Weather Station.........................................................................................................10

12-Hour time format....................................................................................................10

La Crosse Technology, Ltd. Page 2

Power requirements .....................................................................................................10

Manually set time: Program Menu............................................................................10

Forecast Icons inaccurate...........................................................................................11

Weather station is blank: No letters, numbers or dashed lines........................12

BATTERIES

Half of all warranty issues can be resolved with fresh batteries of the appropriate

voltage.

We suggest name brand alkaline batteries.

Use batteries dated at least six years in advance of the current year. Batteries

dated earlier than six years from now may still work, but may be unstable in

performance.

Alkaline batteries manufactured this year will have an expiration date 10 years

in the future. Battery technology has improved and batteries will maintain

voltage longer in storage. However, the environment the batteries reside in for

the 10 years can deplete the power.

Good name brand alkaline batteries make less noise, which reduces the chance

of RF (radio frequency) interference from the battery compartment. A minimum

voltage of 1.48V for each battery is necessary for proper performance.

WEATHER STATION FACTORY RESTART

The factory reset will return the wind speed station to its default settings. This will

clear all previous recorded history, so you may want to write down data before

taking this step.

1. Hold down both the WARNING and ALERTS button together for 5 second. This

will clear all recorded weather data and reset the station's settings back to

default

2. The weather station will fully populate, clear all records, then return to a normal

display and search for outdoor sensors.

3. While searching for the outdoor sensors the Wind Speed, and Outdoor

4. Temperature/Humidity will show dashes.

5. Once connected to the outdoor sensors (allow 3 minutes) the Wind Speed, and

6. Temperature/Humidity will show current readings.

7. In the absence of wind, this reading will show 0.00.

Dashes = Not connected to sensor

Zero or current readings = Connected to sensor.

BATTERY CHANGE

TX141Wv2 Sensor:

1. Grab the vented portion of the sensor and turn counter clockwise.

2. Remove old batteries and install fresh “C” batteries.

3. Carefully align and turn vented portion clockwise to tighten.

4. Hold the WIND button on the weather station for 3 seconds to search for the

sensor.

La Crosse Technology, Ltd. Page 3

POWER REQUIREMENTS

2-C batteries power the wind/thermo-hygro sensor

3-AAA Alkaline batteries for the wind speed station

COMPATIBLE SENSORS

TX141Wv2 Wind Speed/Thermo-hygro sensor

TX141TH-BCH Add-on channel 2 or channel 3 for additional

temperature/humidity readings.

The above 433MHz sensors will read to this wind speed station.

ADD-ON SENSORS

You can add up to two TX141TH-BCH* sensors for extra temp/humidity

readings on channels 2 or 3. (Wind Sensor uses channel 1).

1. Remove the battery cover from all the sensors (leave battery covers off until all

sensors are received by the wind station).

2. Set the first additional sensor to Channel 2 and insert 2 AA batteries.

3. Set the second additional sensor to Channel 3 and insert 2 AA batteries.

4. Hold the TEMP button on the wind station for 5 seconds to search for sensors.

5. Press the TX button on each sensor.

6. When connection is established, the temperature & humidity for each of the

selected channels will appear.

7. Install the battery covers on each sensor.

8. Keep sensors and the wind station 5-10 feet apart for 15 minutes to establish a

solid connection.

9. After 15 minutes, place the remote sensors in appropriate shaded locations.

10.Press and release the -/CH button to view channels 1, 2 or 3 on the wind station

when multiple sensors are used.

*Additional sensors are sold separately & are available for purchase here:

www.lacrossetechnology.com/tx141th-bch-temperature-humidity-sensor

WIND/THERMOHYGRO SENSOR

DASHES SHOWN FOR OUTDOOR TEMPERATURE/HUMIDITY/WIND SPEED

Dashes means there is lost connection between the display and the outdoor

sensor.

Batteries are the most common problem.

Distance/Resistance can cause loss of sensor signal. Avoid having more than

one wall, window, tree etc., between the display and the sensor. UV coated

windows may actually reflect the signal. Stucco walls will absorb the signal.

It may be helpful to orient the weather 90 degrees towards the sensor for better

reception.

Sensors operate best when elevated at least 6 feet.

Remove the batteries from the sensor for 2 minutes. Replace the batteries in the

Thermohygro sensor and after 5 minutes press and hold the TEMP button for 5

seconds. Wait 10 minutes. If the unit does not receive a reading from all the

sensors, please try the factory reset.

La Crosse Technology, Ltd. Page 4

INACCURATE OUTDOOR TEMPERATURE/HUMIDITY

The thermo-hygro sensor reads the environment. When the sensor reads high

during the day but not at night it is a mounting problem.

Side-by-side test: Bring the wind/thermo-hygro sensor in the house and place

it next to the station for 2 hours.

Compare indoor and outdoor temperature. The temperatures should be within 4

degrees to be within tolerance. The humidity should be within 14% to be within

tolerance.

If the sensor reads correctly when next to the wind speed station then try a

different location outside.

Look for heat sources such as sunlight or reflected heat.

OUTDOOR READINGS ARE STUCK OR OFL

Check batteries.Overpowered or underpowered batteries can cause this

reading.

Replace sensor.

INTERMITTENT SENSOR READINGS

RF (radio frequency) communication may come and go occasionally. This can be

normal in some environments (e.g. moister climates).

If a sensor goes out, please wait 2-4 hours for it to reconnect on its own. Please

be patience – these stations can reconnect on, after many hours out.

RF (radio frequency) communication is not always 100% on.

Certain temporary conditions can cause it to go out for a time (e.g. 100%

humidity).

If a miss happens:

Hold the WIND button for 5 seconds to search for sensor.

The units try for 20 minutes to reconnect. After 20 minutes, the sensor stops

trying for an hour (to preserve battery life). After the 1-hour break, the sensor

will start another 20-minute re-connect cycle.

Distance/Resistance can cause loss of sensor signal. Avoid having more than

one wall, window, tree etc., between the display and the sensor. UV coated

windows may actually reflect the signal. Stucco walls will absorb the signal.

Check batteries. This is our primary warranty issue.

SENSOR DRAINS BATTERIES QUICKLY

Test a new set of alkaline batteries. Write down the date of installation and the

voltage of the batteries.

When the batteries fail, please note the date and voltage again. This is helpful in

determining the problem.

Check the distance and resistance between the sensor and station. Sensors at

the end of the range may work while batteries are fresh but not after they drain

a bit.

Check for leaking batteries, which may damage the sensor.

La Crosse Technology, Ltd. Page 5

FAHRENHEIT/CELSIUS

Enter the program menu to select in Fahrenheit (ºF) or Celsius (ºC).

HI | LO TEMPERATURE/HUMIDITY RECORDS

Press and release the TEMP button to view HI/LO, temperature and humidity

readings with time/date stamp. Press and release TEMP again to view the next

value.

• Outdoor temperature HIGH

• Outdoor temperature LOW

• Outdoor humidity HIGH

• Outdoor humidity LOW

• Indoor temperature HIGH

• Indoor temperature LOW

• Indoor humidity HIGH

• Indoor humidity LOW

• Feels like HIGH

• Feels like LOW

• Dew Point

Note: Dew Point Temperature is not time/date stamped.

RESET HI | LO TEMPERATURE/HUMIDITY RECORDS

Press and release the TEMP button to view individual HI | LO readings.

Hold the MINUS button for five seconds to reset each individual value.

Individual readings will reset to current temperature, humidity, etc.

WIND CUPS SPINNING SLOW OR NOT SPINNING

Check for debris or ice in cups.

Check mounting location. Look for obstructions that prevent the wind from

reaching the sensor.

In most cases, the wind sensor needs to be 4-6ft above the highest point on the

roof in order to clear nearby obstructions and read accurately.

A 50-foot clearance in all directions is best.

Push down firmly on the center of the cups to reseat them.

Cups are replaceable. REPLACE WIND CUPS

Replace wind cups:

1. Loosen the screw on side of cups

2. Remove cups

3. Install new cups

4. Tighten screw

La Crosse Technology, Ltd. Page 6

Note: The screw in the wind cups will fit on the flat side of the metal stem on the

sensor.

WIND SPEED IS 0.00

Check that the wind cups attach to the sensor. Occasionally they can come off.

Check that the cups seat properly by pushing on the center of the cups.

Check that the cups spin freely.

WIND SPEED IS INACCURATE

Check the unit of measure (MPH, KM/H or M/S).

Check to see if the Wind speed station receives the same repetitive wind speed

recording from the sensor multiple times.

Confirm the direction is working correctly.

Check that the cups turn freely.

Check for obstructions that prevent clear wind flow to the cups.

Check mounting. In most cases, the wind sensor needs to be 6 feet or more

above the highest point on the roof in order to clear nearby obstructions and

read accurately. A 50-foot clearance in all directions is best.

It is helpful to send pictures of the sensor mounting, if you need to contact

customer support.

Check that your batteries are fresh in the thermo-hygro sensor and the Wind

speed station.

UNDERSTANDING WIND READINGS

Current Wind Speed:

The current wind speed, which represents the highest speed in the past 30 seconds. This

should correspond to the wind graph.

Top Wind Speed: Highest recorded wind speed in time interval. Default is 1 hour,

controlled by the

Wind History feature, details below.

Wind Speed History:

Press and release the WIND button to view the maximum wind history values.

• One Hour: past 60 minute period (default Top Speed record, already shown)

• 24-hour: Past 24-hour period, from last record

• 7 Days: Past 7-day period, from last record

• Month: Defined by Calendar Month i.e. January 1 - January 31

• Year: Defined by Calendar Year i.e. January 1 - December 31

Note: After 5 seconds, all readings default back to the 1-hour top wind speed.

Wind Speed Graph:

The wind speed graph with sections based on current wind speed.

One segment will flash indicating current wind speed.

Feels Like Temperature:

Wind Speed | Temperature | Humidity combined:

• When outdoor temp is higher than 80˚F, displays heat index

La Crosse Technology, Ltd. Page 7

• When outdoor temp is lower than 50˚F, displays wind chill

• When outside of the above ranges will display current outdoor temperature.

RESET WIND SPEED HISTORY

• Press the WIND button to view individual wind speed readings.

• Hold the MINUS button for five seconds to reset each individual value.

• Wind speed reading will reset to current wind speed.

SENSOR AREA IS BLANK (NO DASHES OR NUMBERS)

Check that other areas of the station read properly. There may be a problem

with the station.

ALERTS: WIND, TEMP, HUMIDITY

Setting alert value and arming individual alerts are separate functions.

• Hold the ALERTS button for 3 seconds to enter alert set mode.

• High Wind Speed ON | OFF will flash.

Alert ON:

1. Press the + or - buttons to arm the alert.

2. Press the ALERTS button and the alert value will flash

3. Press the + or - buttons to set the alert value (Hold to set quickly).

4. Press ALERTS button to move to next alert.

Alert OFF:

1. Alerts are OFF unless armed. If you do not wish to set an alert, simply press the

ALERTS button again to move to the next alert.

Alerts setting order:

• High Wind Speed ON/OFF (CURRENT wind)

• High Wind Speed Value 0-99mph (0-159kph)

• Outdoor LOW Temperature ON/OFF

• Outdoor LOW Temperature Value -40°F to 140°F (-40°C to 60°C)

• Outdoor HIGH Temperature ON/OFF

• Outdoor HIGH Temperature Value -40°F to 140°F (-40°C to 60°C)

• Outdoor LOW Humidity ON/OFF

• Outdoor LOW Humidity Value 10%RH to 99%RH

• Outdoor HIGH Humidity ON/OFF

• Outdoor HIGH Humidity Value 10%RH to 99%RH

• Indoor LOW Temperature ON/OFF

• Indoor LOW Temperature Value 32°F to 99°F (0°C to 37°C)

• Indoor HIGH Temperature ON/OFF

• Indoor HIGH Temperature Value 32°F-99°F (0°C to 37°C)

• Indoor LOW Humidity ON/OFF

La Crosse Technology, Ltd. Page 8

• Indoor LOW Humidity Value 10%RH to 99%RH

• Indoor HIGH Humidity ON/OFF

• Indoor HIGH Humidity Value 10%RH to 99%RH

ACTIVE ALERT

When armed alert value is reached, station will beep five times each minute,

until it is out of alert range.

The flashing alert icon will indicate which alert is sounding.

Press any button to stop the alert sound.

The alert icon will flash while value is in alert range.

Disarm Alert:

1. Hold the ALERTS button for 3 seconds to enter alert set mode.

2. Press and release ALERTS button until you see the alert you wish to disarm.

3. Press the + or - buttons to disarm the alert.

4. Press the WARNING button to exit.

FROST AND STORM WARNINGS

1. Hold the WARNING button for 3 seconds to view frost and storm warnings.

2. Press and release the + or -/CH buttons to activate/deactivate frost and

storm warnings.

3. Press and release the WARNING button to confirm and move to the next

item.

Note: The warning values are not programmable. You can only

activate/deactivate the frost or storm warning.

This station offers the option of active Frost and Storm alerts.

Simply activate the alerts to use them.

Note: When setting FROST alerts for channels two & three, user will select

channel first (1, 2, 3) then select outdoor alert. FROST Alerts cannot be set

for channel 2 & 3 if no additional sensors are connected.

Frost Warning:

When the outdoor temperature is between: 28 °F to 37 °F (-2 °C to 3

°C), and the frost warning is active a Frost Warning will alert you with a

flashing snowflake icon and the station will sound.

Outside of this range, the frost warning is not active.

Weather station will beep five times each minute, for 5 minutes. After 5

minutes, the warning icon will flash until frost warning is out of range.

Storm Warning:

When the barometric pressure drops more than 2.5hPa in a 3 hours

period, the storm warning will flash and the station will sound.

The storm warning icon (alert triangle) will flash storm and storm icons

(clouds, rain, lightning) will flash and sound for 1 minute.

La Crosse Technology, Ltd. Page 9

After 1 minute, the warning icon will flash for a period of 1 hour.

Press any button to stop the sound. Storm warning icon will still flash.

MOUNTING/POSITIONING

First, set everything up in the house to be sure it works before mounting the

sensors outside.

TX141Wv2 sensor:

• For the most accurate wind speed readings, mount the TX144W sensor as the

highest object for 50 feet in all directions.

• Mount sensor vertically with the wind cups on top.

• The maximum wireless transmission range to the wind station is over 330 feet

(100 meters) in open air, not including walls or trees.

1. Insert mounting pole into sensor.

2. Tighten screws

3. Insert bottom of pole into mounting bracket

4. Tighten knob to secure

5. Use screws through the bottom of the mounting bracket to attach.

6. The sensor may be mounted from the bottom or side.

Use your own mounting pole:

Insert your own mounting pole into the sensor.

Tighten screws

Optional: Add-on TX141TH-BCH sensor

•To mount the sensor, either use the hole at the top to hang it from the back

using a nail, or insert one mounting screw through the front.

•Mount the TX141TH-BCH sensor on a north-facing wall or in any shaded area.

Under an eave or deck rail is preferred.

•The maximum wireless transmission range to the weather station is over 330

feet (100 meters) in open air, not including walls or floors.

•Mount the sensor vertically, to allow moisture to drain out properly.

•http://bit.ly/TH_SensorMounting

DISTANCE/RESISTANCE/INTERFERENCE

Distance:

The maximum transmitting range in open air is over 330 feet (100 meters)

between the sensors and the Wind speed station.

Consider what is in the signal path between the Wind speed station and the

sensors.

Consider the distance the Wind speed station is from other electronics in the

home.

Resistance:

La Crosse Technology, Ltd. Page 10

Obstacles such as walls, windows, stucco, concrete, and large metal objects can

reduce the range.

When considering the distance between the sensor and the Wind speed station

(330 feet, 100 meters open air) cut that distance in half for each wall, window,

tree, bush or other obstruction in the signal path.

Closer is better.

Do not mount the sensors on a metal fence. This significantly reduces the

effective range.

Interference:

Consider items in the signal path between the sensors and the station.

Simple relocation of the sensors or the Wind speed station may correct an

interference issue.

Windows can reflect the radio signal.

Metal will absorb the RF (radio frequency) signal.

Stucco held to the wall by a metal mesh will cause interference.

Transmitting antennas from: ham radios, emergency dispatch centers, airports,

military bases, etc. may cause interference.

Electrical wires, utilities, cables, etc. may create interference if too close.

Vegetation is full of moisture and reduces signal.

Dirt: Receiving a signal through a hill is difficult.

WEATHER STATION

12-HOUR TIME FORMAT

Time display: 12-hour or 24-hour format.

Default is 12-hour time.

Use the Program Menu to switch time formats.

POWER REQUIREMENTS

3-AAA Alkaline batteries power the wind speed station.

MANUALLY SET TIME: PROGRAM MENU

The SET button will move through the program menu.

The + or - button will adjust values.

Press the WARNING button at any time to exit.

Program Menu:

•Beep On/Off

•Hour

•Minutes

•12/24 Hour time format

•Year

•Month

•Date

•Fahrenheit/Celsius

•MPH | KMH

The SET button will move through the program menu. To change a value use the +

or - button.

Andere Handbücher für 327-1417BW

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology 308-2316 Bedienungsanleitung

La Crosse Technology

La Crosse Technology V10-TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2010 Leitfaden

La Crosse Technology

La Crosse Technology T84237 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology C79790V2-BBQ1 Installationsanleitung

La Crosse Technology

La Crosse Technology 308-1417 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 330-2315 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6821A Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9630U-IT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology Professional Remote Weather Station Kurzanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today TX24U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9125U-IT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX2000 Discovery Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425C Bedienungsanleitung

La Crosse Technology

La Crosse Technology ED31411 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425C Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1515U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414MB Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7078TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-47577 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9060U-IT Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Renkforce

Renkforce 1208067 Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung