La Crosse Technology T84237 Bedienungs- und Wartungshandbuch

Wireless Rain Station

Instructional Manual

Model: T84237

DC:102017

For online video support:

http://bit.ly/LaxTechTalk

Page | 1 www.lacrossetechnology.com/support/ T84237

Table of Contents

Button Function Explanation

Setup

LCD Features

Settings Menu

Display Calendar or

Indoor Temperature

Rainfall Readings

Reset Current Rainfall Readings

Rainfall Cylinder Graph

Rainfall History by the Month

24 Hour Rainfall Alert

Alert Sounds | Disarm Alert

Button Function Explanation

For better programming instructions, please note these terms for button use:

• Press: Press the designated button.

• Hold: Hold the button for 3 seconds (or 5 seconds if resetting) then release the

button.

Note: If no buttons are pressed for 20 seconds your station will return to normal

rain display.

NOW Rainfall Alert (silent)

Search for Rain Sensor

Position Rain Sensor

Position Rain Station

Restart

Help Us, Help You

Let’s Get Social

Care and Maintenance

Speciﬁcations

Warranty and Support

FCC Statement

Canada Statement

Setup

T84237 www.lacrossetechnology.com/support/ Page | 2

1. Insert 2 AA batteries into your rain sensor. Observe correct polarity.

2. Insert 2 AA batteries into your rain station. Observe correct polarity.

3. Optional: Tip the rocker of your rain sensor to simulate rain and receive a reading

on your rain station.

4. Leave 5-10 feet apart for 15 minutes. After 15 minutes, with station and sensor

connected, move your rain sensor outside to an open area.

(Position Rain Sensor-- Page 9)

Rain Sensor:

• Flip down the locks on both sides of your rain sensor.

• Remove the funnel from the base to access the battery compartment.

• Flip up the lock on the side of the battery compartment to open.

• Insert 2-AA batteries according to polarity markings.

• Lock everything back into position.

Funnel

Base

Lock on base

Lock on

battery compartment

Rocker

Station:

• Remove the battery cover (under the pull out stand).

• Insert 2-AA batteries according to polarity markings.

LCD Features

AM | PM

Fahrenheit | Celsius Rain Alert

Sensor Reception

Low Battery

Settings Menu

• Hold the HISTORY/TIME SET button to enter the settings menu.

• Move through settings with the TIME SET button.

• The +/MODE or - button will adjust settings.

Settings Menu Order:

1. Beep ON |OFF

2. Set Hours

3. Set Minutes

4. 12 | 24 Hour time format

5. Set Year

6. Set Month

7. Set Date

8. Month/Day or Day Month order

9. Inches |Millimeters of rain

10. Fahrenheit | Celsius temperature

Page | 3 www.lacrossetechnology.com/support/ T84237

Inches | Millimeters

1. Beep ON | OFF

3. Set Minutes

9. Select Inches | Millimeters

4. Choose 12 | 24 hour time

2. Set Hours

5. Set Year 6. Set Month

7. Set Date

10. Select Fahrenheit | Celsius

8. Month/Day | Day/Month

T84237 www.lacrossetechnology.com/support/ Page | 4

Display Calendar or Indoor Temperature

Page | 5 www.lacrossetechnology.com/support/ T84237

You can display either the calendar or the indoor temperature with the touch of a

button.

• Press the +/MODE button to switch between the calendar display, or the indoor

temperature display.

Rainfall Readings

• Press the RAIN/ALERT button to view dierent rain readings.

• The time/date will disappear for 20 seconds then return to normal time/date

readings.

• Rainfall readings will stay on user selection.

NOW:

• Rain from the start of a rain event,

until no rain has accumulated for 30

minutes.

• Resets to zero after 30 minutes of no

additional rainfall.

ONE HR:

• Rainfall that has accumulated during

the past hour.

• Example: current time is 6:49, 1HR

rain is accumulated total between

5:50 to 6:49.

24HR:

• Rainfall based on past 24 hours of

time.

• At each full hour, 1HR is recorded.

• This is a running total.

T84237 www.lacrossetechnology.com/support/ Page | 6

7 DAYS:

• Rainfall of last 7 consecutive 24HR rain

readings.

• Updates each day at 0:00.

• Not a subject to the calendar.

• Be sure time is set.

MONTH:

• Current Month. Ex: January 1-31.

• Resets the ﬁrst day of the month

• Current month will show in the date area.

YEAR:

• Current year starting January 1 total.

• Current Year will show in time display.

TOTAL:

• Total rainfall since station was powered on

or reset.

Note: As time passes without rain, the Now, One Hr, 24 Hrs, and 7 day rainfall totals

will count down to zero. This is normal.

Reset Current Rainfall Readings

• Press the RAIN/ALERT button to view rain readings:

(Now, One Hr, 24 Hrs, 7 Days, Month, Year or Total)

• While viewing individual rain readings, hold the -/RESET button for 3-5 seconds to

reset that rainfall reading.

Note: This will not aect the 12 month history readings which are stored in memory.

Rainfall History by the Month

• Rainfall History is viewable by the month for the past 12 months.

• Press the HISTORY/TIME SET button to view previous month’s rainfall totals.

• HIST, Month, Year and Rainfall amount will show.

• The History by the month cannot be reset.

January 2017 December 2016 November 2016

Note: History back 12 months, then back to current month with continued presses

of HISTORY/TIME SET button.

Rainfall Cylinder Graph

The rain cylinder has 10 segments that change with the rainfall total. The numbers

next to the cylinder graph will change with increased rainfall amounts.

Up to 1 inch of rainfall:

• Each segment indicates 0.1 inch of rainfall.

• The graph will represent 1 inch.

Over 1 inch of rainfall:

• The graph will represent 2 inches of rainfall at a time.

• Each segment indicates 0.4 inches of rainfall.

• Cylinder graph will read up to 70 inches of rain. Over 70 inches of rain, the graph

will show full.

Page | 7 www.lacrossetechnology.com/support/ T84237

T84237 www.lacrossetechnology.com/support/ Page | 8

24 Hour Rainfall Alert

1. Hold the RAIN/ALERT button for 3 seconds to enter the alert settings mode.

2. Alert OFF will show. Use the - or +/MODE button to turn ON the rainfall alert.

3. When ON is selected the 24-hour rain alert value will show. Use the - or +/MODE

buttons to adjust.

4. Press the RAIN/ALERT button to conﬁrm and exit.

• When armed alert value is reached, station will beep 5 times each minute, until

out of alert range.

• The ﬂashing alert icon will indicate alert.

• Press any button to stop the temp alert sound.

1. Hold the RAIN/ALERT button for 3 seconds, until you see Alert ON.

2. Press the - or +/MODE button to turn alert OFF.

3. Press RAIN/ALERT to exit.

Alert Sounds | Disarm Alert

NOW Rainfall Alert (silent)

• At the beginning of a rain event (NOW), the rain drop icons will ﬂash indicating

current rainfall.

• The drops will continue to ﬂash until the NOW reading reaches zero.

• This is a silent alert. Your station will not beep, just the raindrops will ﬂash.

• This silent alert can not be deactivated.

• The 24 hour rainfall alert is a separate alert that is programmable.

Rain drops

ﬂash silently

Page | 9 www.lacrossetechnology.com/support/ T84237

1. Mount in an open area for a more accurate rain count.

2. Install the Rain sensor on a level platform that is stationary.

3. Insert one, two, or three mounting screws (not included) through the holes in the

base of the rain sensor.

4. Ideally, your rain sensor should be mounted at least 6 ft in the air and have a

direct line of sight to the display.

5. The rain sensor should be accessible to allow for periodic cleaning of debris or

insects.

6. The maximum wireless transmission range to the rain station is over 300 feet

(91 meters) in open air, not including walls or ﬂoors.

Search for Rain Sensor

Position Rain Sensor

• Hold the SENSOR button to search for the rain sensor.

• The sensor reception icon will ﬂash until the sensor signal is received or for 3

minutes if no signal available.

• After showing dashes for 30 minutes, the station will automatically look for the

sensor signal.

1. Remove batteries from your sensor and batteries from your station.

2. Press any button 20 times.

3. After 15 minutes insert batteries into your sensor, and into your rain station.

4. Wait 15 minutes to establish a strong connection.

5. Place sensor outside.

Restart

Holes for mounting

Rocker

Self-emptying

drain holes

Position Rain Station

• Use the triangle hole on back to hang on the wall.

• Use the pull out stand on the battery cover to place on your

desk or table.

Andere Handbücher für T84237

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-2800-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-9125U-IT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7212U Bedienungsanleitung

La Crosse Technology

La Crosse Technology SW404 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S84107 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S81120v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6207 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 512-807 Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-7047U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2510 Bedienungsanleitung

La Crosse Technology

La Crosse Technology V30V2 Abmessungen

La Crosse Technology

La Crosse Technology WS-7107U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today WS-7394U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Weather Direct WD-3308 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7394U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-145B Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA84688 Abmessungen

La Crosse Technology

La Crosse Technology WS-3512 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1613-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7013BZ Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417v3 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung