La Crosse Technology Wireless Weather Station Bedienungsanleitung

WIRELESS 868 MHz WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this fancy Weather Station with wireless 868MHz

transmission of outdoor temperature and display of indoor temperature and humidity. It is

further acting as a DCF-77 radio controlled clock with calendar display and alarm clock

function. In addition, sunrise/ sunset/ sun duration time as well as the moon phase are

shown. With the totally 15 different weather forecast icons featured by "Weather girl", users

can easily observe the forecast weather condition and will no longer worry the sudden

weather change. This innovative product is ideal for use in the home or office.

« Instant Transmission+» is the up and coming state-of-the-art new wireless

transmission technology, exclusively designed and developed by LA CROSSE

TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from

the transmitters: follow your climatic variations in real-time!

FEATURES:

The Weather Station Battery

compartment cover

LCD Display

Function

Keys

Hanging hole

Function

Keys Foldout

Stand

•DCF-77 Radio controlled time with manual setting options

•DCF Time reception ON/OFF

•12/24 hour display

•Hour, minute and second time display

•Calendar (weekday, date, month and year)

•Time zone option ±12 hours

•Alarm with snooze function

•Snooze setting

•Weather forecasting with 15 easy-to-read weather forecast signs featured by "Weather

girl"

•Weather forecasting icon sensitivity setting

•Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable

•Indoor and outdoor temperature display with MIN/MAX recording

•Indoor humidity reading displayed as RH% with MIN/MAX recordings

•All MIN/MAX temperature recordings show date and time received

•All MIN/MAX recordings can be reset

•Display of sunrise time, sunset time and sun duration in 39 cities

•12 Moon phases display throughout the year

•Can take up to three outdoor transmitters

•LCD contrast setting

•Low battery indicator

•LED backlight

•Table standing/ Wall mounting

The Outdoor Temperature Transmitter

•Remote transmission of outdoor temperature to Weather

Station by 868 MHz

•Shower proof casing

•Wall mounting case (Mounting at a sheltered place. Avoid

direct rain and sunshine)

SETTING UP:

When one transmitter is used

1. First, insert the batteries into the Temperature transmitter. (see “Install and replace

batteries in the Temperature transmitter“).

2. Immediately after and within 25 seconds, insert the batteries into Weather station

(see “Install and replace batteries in the Weather station”). Once the batteries

are in place, all segments of the LCD will light up briefly. Following the time as 0:00

and the "Weather girl" icon will be displayed. If these are not displayed after 60

seconds, remove the batteries and wait for at least 10 seconds before reinserting

them.

3. After inserting the batteries, the Weather station will start receiving data from the

transmitter. The outdoor temperature and the signal reception icon should then be

displayed on the Weather station. If this does not happen after 3 minutes, the

batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

Weather Station and the transmitter (see notes on “Positioning” and “868 MHz

Reception”).

5. Once the remote temperature has been received and displayed on the Weather

station, the DCF time (radio controlled time) code reception is automatically started.

This takes typically between 3-5 minutes in good conditions. If after 10 minutes, the

DCF time has not been received, press the SET key to manually enter a time

initially.

When more than one transmitter is used

1. User shall remove all the batteries from the weather station and transmitters and wait

for 60 seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 25 seconds of powering up the first transmitter, insert the batteries to the

Weather Station. Once the batteries are in place, all segments of the LCD will light up

briefly. Following time as 0:00 and the weather girl icon will be displayed. If they are

not shown in LCD after 60 seconds, remove the batteries and wait for at least 60

seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1) should then be

displayed on the Weather station. Also, the signal reception icon will be displayed. If

this does not happen after 2 minutes, the batteries will need to be removed from both

units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature

readings from the first transmitter are displayed on the Weather station.

Note: User shall insert the batteries into the second transmitter within 10 seconds of

reception of the first transmitter.

6. The outdoor data from the second transmitter and the "channel 2" icon should then be

displayed on the Weather station. If this does not happen after 2 minute, the batteries

will need to be removed from all the units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor

data are displayed on the Weather station. Then within 2 minutes, the channel 3

outdoor data from the third transmitter will be displayed and the channel icon will shift

back to "1" once the third transmitter is successfully received. If this is not happen,

user shall restart the setting up from step 1.

Note:

•User shall insert the batteries into the third transmitter within 10 seconds of reception of

the second transmitter.

•And user may require to check the displayed readings on the weather station against

those shown on the transmitters in order to recognise the Channel No. of each

transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

Weather Station and the transmitter (see notes on “Positioning” and “868 MHz

Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as

described above. Should transmission problems occur, it is necessary to remove the

batteries from all units and start again the set-up from step 1.

9. Once the remote temperature has been received and displayed on the Weather

station, the DCF time (radio controlled time) code reception is automatically started.

This takes typically between 3-5 minutes in good conditions.

If after 10 minutes, the DCF time has not been received, press the SET key to manually

enter a time initially.

Note:

Daily DCF reception is done at 02:00 and 03:00 every day. If the reception at 03:00 is not

successful, then at 04:00 and 05:00 and 06:00 there are other tries, until one is successful. If

the reception at 06:00 is still not successful, then the next try takes place at 02:00 next day.

If reception is successful, the received time will override the manually set time. The date is

also updated with the received time. (Please refer also to notes on “DCF-77 Radio

Controlled time” and “Manual Time Setting”)

INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the

batteries, please follow the steps below: 1. Remove the cover at the back of the

Weather Station.

2. Insert batteries observing the correct

polarity (see marking).

3. Replace compartment cover.

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The Temperature Transmitter uses 2 x AA, IEC LR6, 1.5V battery. To

install and replace the batteries, please follow the steps below:

1. Remove the battery compartment cover at the back of the

transmitter.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery compartment cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following

the setting up procedures. This is because a random security code is assigned by the

transmitter at start-up and this code must be received and stored by the Weather station in

the first 3 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy

of these units (Battery life See Specifications below).

Please participate in the preservation of the environment. Return used

batteries to an authorised depot.

FUNCTION KEYS:

Weather Station:

The Weather Station has five easy to use function keys.

SNOOZE/ SUN key

MIN/ MAX key

SET key ALM key

CH/ + key

Andere Handbücher für Wireless Weather Station

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology C85845V3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology W85777 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88785 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7095U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S85807 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WD-2511U Installationsanleitung

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today WS-7394U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 512-807 Technisches Datenblatt

La Crosse Technology

La Crosse Technology WA-1030U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX141TH-BCH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6212 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9009U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology S75617 Abmessungen

La Crosse Technology

La Crosse Technology S88907 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417BLV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308A-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-10618 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85777v2 Installationsanleitung

La Crosse Technology

La Crosse Technology C84428 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7026U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1611T Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85784 Bedienungs- und Wartungshandbuch

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung