La Crosse Technology WS6283 Installations- und Betriebshandbuch

WS6283 User Manuals

Features:

 DCF Radio controlled clock function

 Time in optional 12/24 hour format

 Perpetual Calendar Up to Year 2099

 Day of week in 7 languages user selectable: English, German, Italian, French, Spanish,

Netherlands and Danish

 Dual Alarm clock can be set on weekdays / weekends and daily

 Snooze time setting (1~30Minute or OFF)

 Transmitter low battery indication

 Indoor comfort indictor

 Weather forecasting and air pressure detect

 Ice alert

 Remote sensor temperature alert range set

 Change trend display

 Humidity measurable range: 20%RH ~ 95%RH

 Temperature:

— Indoor temperature measurement ranges: -9.9°C (14.2°F) ~ 50°C (122°F)

— Outdoor temperature measurement ranges: -40°C (-40°F) ~ 70°C (158°F)

— Temperature alternatively in °C or °F

 Maximum /minimum value record of temperature and humidity

 Wireless Outdoor Sensor:

—3 Channels selectable

— 433.92MHz RF transmitting frequency

— 50 meter transmission range in an open area

 Barometric pressure:

— Barometric pressure measurement ranges: 850～1100 mB/hPa (25.10～32.48inHg)

— Pressure alternatively in mB/hPa or inHg

 Power Supply:

Station : 2 x LR03 AAA / Adapter: DC5V 600mA

Sensor: 2 x LR03 AAA

WS6283 User Manuals

Production Appearance

WS6283 User Manuals

1. INDOOR temperature and humidity value

2. Weather forecast

3. Air pressure value

4. Remote sensor temperature alert status symbol

5. Outdoor comfort indication

6. Date

7. Time

8. Alarm status indicator

9. Radio wave receiving status symbol

10. Day of week

11. Indoor comfort indicator

12. Light and snooze button

13. Operation button

14. DC input jack

15. Battery compartment cover

16. Bracket

WS6283 User Manuals

Initial operation:

 Open the main unit battery compartment cover

 Insert 2 x AAA batteries observing polarity [ “+” and “ –“ marks]

 When you insert the batteries, all icons on the LCD will light up for 3 seconds, and you will

hear a beep tone, then detect indoor temperature & humidity.

 The main unit will now start to make a connection to the outdoor remote sensor. This process

lasts for a maximum of 3 minutes and will displayed by a flashing reception antenna symbol

In the upper right corner of the number of channels.

 This moment, Open the remote Sensor battery compartment cover, push the channel switch

to select the number of channels to use, Insert 2 batteries according to the correct polarity

【Reference “+” and “–” marks】, Press the “℃/°F” button to select the temperature unit you

want, close the battery cover.

 After receiver has created a connection to the outdoor remote sensor, after up to 3 minutes it

will enter the DCF Radio control time receive mode (The backlight will turn off during RC

reception).

 The backlight will remain on after DCF reception is completed.

Reception of the Radio signal:

 Press and hold the【】 button to manually enter the DCF radio control receiving function,

when the adapter is used for power supply, the backlight will be automatically and

temporarily turned off after entering receiving mode. After receiving, it will automatically

return to the previous backlight brightness.

 Enters DCF receiving mode, the symbol will flashing, when a valid signal is detected

the symbol no flashing and switch to is flashing, after about a few minutes, the

receiving process will end.

：Received successfully

：The previous reception was successful, but the last reception failed

 At 1:00 /2:00 / 3:00 AM, the clock automatically carries out the synchronization procedure

with the DCF signal to correct any deviations to the exact time. If this synchronization

attempt is unsuccessful, the system will automatically attempt another synchronization at

the next full one hour. This procedure is repeated automatically up to total 5 times.

 During RC reception，to stop searching radio signal, press the【】 button once.

F.Y.I.:

 We recommend the product be placed at a minimum distance of 2.5 meters (8.2Feet) to all

sources of interference, such as televisions or computer monitors or switching power

adapter.

WS6283 User Manuals

 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In

such extreme circumstances, place the system close to the window.

 During the RC receive mode, only the 【Light/Snooze 】 and 【】 buttons have a

function, other buttons are not functional, If you want to carry out other functions of

operation, please press 【】 button to exit the RC receiving mode.

Manual time setting:

 Press and hold the button 【】for 2 seconds, the “ ON/OFF ” starts to flash, and press

【】 and 【】 buttons to set the radio control function ON or OFF.

 Press button 【】 to confirm the item has been set and go to the next one, the sequence

of setting items is as follows:

RCC ON/OFFDST ON/OFFTime zone 12/24HR HOUR  MINUTE  Format of

DATE (D/M or M/D)  YEAR  MONTH  DATE  Temperature Unit (°C/°F) Language

of WEEK Pressure unit(hPa/mb or inHg) Current standard air pressure Current

weather

 When adjusting the value, press and hold the【】 or 【】 button to adjust quickly.

 Press button 【】 to confirm the last item to end the setting procedures, then it will return

to the normal mode.

 When choosing the 12Hr format, if “PM” is displayed before the hours, it means that the hour

is post meridiem.

 The 7 languages that show week abbreviations are listed below:

F.Y.I.:

 If there is no valid operation within 20 seconds, it will automatically return to normal time

mode from the set mode.

WS6283 User Manuals

Setting the daily alarms:

 Press【】 button, you can set Alarm1 and Alarm2 ON or OFF, symbol “” appear means

that ALARM1 is ON, symbol “” appear means that ALARM2 is ON, symbol “ ” or “”

disappear means that Corresponding ALARM is OFF.

 Press once button “”, LCD display Alarm1 time (5 seconds), press button “”again

when Alarm1 time is displayed, LCD display Alarm2 time (5 seconds), press button “”again

when Alarm2 time is displayed, return to current time display.

 When Alarm1 time is displayed, press and hold button “” for 2 seconds until Hour of the

Alarm1 time starts to flash, press the【】 or【】 buttons to set the required Hour.

 Press button “” to confirm the item has been set and go to the next one, the sequence of

setting items is as follows:

Hour of Alarm1  Minute of Alarm1  repeat period of Alarm1  Snooze time of Alarm1

 When setting the repeat period, comply with the following rules:

M-F: From Monday to Friday

S-S: From Saturday to Sunday

: From Monday to Sunday

 The snooze time can be set to 1-30 minutes or OFF, if “OFF” is selected, it means that the

snooze function is turned off.

 The Alarm2 time can be set according to the same method above

F.Y.I.:

 If there is no valid operation within 20 seconds, it will automatically return to normal time

mode from the alarm time set mode.

 When adjusting the value, press and hold the 【】or 【】button to adjust continuously

and quickly

 The Alarm will sound for 2 minutes if you do not deactivate it by pressing any button.

Turn OFF the alarm sound

 When it's ringing, press any button except the【SNOOZE】 button to stop the Alarm sound.

 When it's ringing, touch and hold the 【SNOOZE】button for 2 seconds to stop the Alarm

sound.

Snooze function

 When it's ringing, touch the 【SNOOZE】button once the alarm sounds to get to snooze mode,

when the set snooze time is over, it will ring again.

WS6283 User Manuals

RF Transmission Procedure

 The main unit automatically starts receiving transmission from remote sensor for

temperature & humidity after batteries inserted.

 The remote sensor will automatically transmit temperature and humidity data to the main unit

after batteries inserted.

 If the main unit failed to receive transmission from remote sensor (“- -.-”and “--” display on

the LCD), Press and hold the 【CH】 button for 2 seconds, RF icon will be flashing，the

main unit will rescan the launch signal of the channel.

 The main unit receive remote signals of up to 3 channels, press 【CH】 button to switch and

display data of different channels, when the symbol appears, the data of different

channels will be displayed automatically every 5 seconds.

Maximum / Minimum numerical value of memory

 When the temperature and humidity are shown in the LCD, the main unit began to record

temperature/ humidity maximum and minimum numerical value.

 Press once 【】 button, the LCD will display maximum value of temperature/ humidity, The

LCD will display the minimum value of temperature / humidity if press once 【】 button again

when the maximum value is displayed.

 at the same time, there are “MAX” or “MIN” displayed on the LCD.

 The maximum / minimum value will RE records after press and hold 【】 button 3 seconds.

 The memory value of the day will be automatically cleared at 0:00 every night.

Weather forecasting function

Warning: Please take the weather forecast from your local weather forecasting service into

account as well as the forecast from your weather station. If there are discrepancies between

the information from your device and from the local weather forecasting service, please take

the advice of the latter as authoritative.

 The weather forecast is calculated from evaluation of fluctuations in the barometric pressure

and may deviate from the actual weather conditions.

 The weather station displays the following weather symbols:

WS6283 User Manuals

Ice alert

 The ice Alert symbol appears and flashing when the remote sensor temperature at –1.0

~ 2.9℃(30.2~37.3℃).

Outdoor temperature Alert

 Press button“”, you can set the Outdoor temperature alert function ON or OFF, this

operation is only valid for the currently displayed channel, if you want to set other channels,

press the 【CH】 button to switch to the channel display you want to set. When the symbol

“” appear means that over upper limit alert function is ON, symbol “” appear means

that over lower limit alert function is ON, symbol “” or “” disappear means that

Outdoor temperature alert function is OFF.

 Press and hold “” button for 2 seconds, enter the outdoor temperature upper limit or

lower limit value setting mode, the set item will flash, press the【】 or【】 buttons to set

the value, press “” button to confirm the item has been set and go to the next one, press

the【CH】button to set the value of other channels.

 When the outdoor temperature exceeds the limit set by the channel，the temperature value

and corresponding icon will be flash, and when the temperature is refreshed, as long as the

temperature still exceeds the set limit, there will be a beep reminder.

WS6283 User Manuals

Comfort indicator

The indoor and outdoor comfort status is shown as follows

Drying: when the temperature is at any value, the humidity is less than 40%

Comfort: when the temperature is 20-28℃ and the humidity is 40-70%

Wet: when the temperature is at any value and the humidity is greater than 70%

No display: when the temperature is not 20-28℃ and the humidity is 40-70%, there is no

comfort display

Trend displaying

 The current temperature/humidity/barometric pressure and the

temperature/humidity/barometric pressure trend are shown in the LCD display.

 After successfully connecting with the remote sensor, the main unit can display the outdoor

temperature/ humidity and the change trend.

Background lighting

 When the adapter is used for power supply, press the button “” can adjust the backlight

brightness.

 When the product is powered only by battery (without adapter), touch the

【SNOOZE/LIGHT】 button once to turn on the backlight for 10 seconds.

Description of low voltage prompt

 If the outdoor transmitter has low power, the flashing low power symbol " " will be displayed

next to the corresponding channel number.

ABOUT AC/DC POWER SUPPLY

Do not use the device:

-if the power supply or the power cable is damaged,

-in the event of a malfunction,

WS6283 User Manuals

-if the device has been damaged in any way.

Never use sharp objects to access the inside of the power supply. Do not disassemble the

power supply, do not throw it into a fire. Do not attempt to disassemble or modify this product

or any of its components. Do not expose the food to high temperatures or direct sunlight. Do

not incinerate it. Do not install the power supply near any heat sources, such as a radiator, hot

air supply, oven, or other apparatus (including amplifiers) that produce heat. Do not store this

product in a place where the temperature exceeds the following range: - 10 to 70 ° C. Do not

use this product in a location where the temperature exceeds the following range: 0 to 40 ° C,

as this may damage it or shorten its life. Do not place the power supply near water or a

source of moisture, such as a bathtub, kitchen sink, swimming pool, in a wet basement, or

other damp locations. The device must not be exposed to splashes. Do not place objects

filled with water, such as vases for example, near the appliance. Connect the power supply

into an easily accessible DC outlet. Ensure that the power cord can not be crushed or pinched,

particularly at plugs, convenience receptacles, and the point where they are connected to the

apparatus. The supplied power supply is intended for indoor use only. Do not place naked

flame sources (such as a lit candle) on or near the power supply. Unplug this power during

lightning storms or during long periods of non-use to avoid damage. Turn off your device

before disconnecting the power cable. This device is not intended for use by people

(including children) whose physical, sensory or mental capabilities are reduced, or people

without experience or knowledge, unless they could benefit ,by the” throung a person

responsible for their safety, surveillance or prior instructions concerning the use of the device.

Children should be supervised to make sure that they do not play with the device. If the

power supply works abnormally,and especoally if it emits sounds or odors that you think are

abnormal, unplug it immediately and have it examined by a qualified repairer. The

socket-outlet must be installed near the equipment and must be easily accessible.

LIABILITY DISCLAIMER：

•The electrical and electronic wastes contain hazardous substances. Disposal of electronic

waste in wild country and/or in unauthorized grounds strongly damages the environment.

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology C87214 Installationsanleitung

La Crosse Technology

La Crosse Technology 308-1451H Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414WBV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84428 Bedienungsanleitung

La Crosse Technology

La Crosse Technology T85647 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7049U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2317 Technisches Datenblatt

La Crosse Technology

La Crosse Technology CA86515 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9037U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412-3TX Abmessungen

La Crosse Technology

La Crosse Technology WS-9125TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7212U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88785 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8158U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA87092 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology C79790-11 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417 Abmessungen

La Crosse Technology

La Crosse Technology WEATHER DIRECT WD-3103U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84428 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7042 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417v3 Abmessungen

La Crosse Technology

La Crosse Technology WS-9730U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung