La Crosse Technology C87214 Installationsanleitung

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 1

C87214 | C87030 FAQS

The links below will work in most PDF viewers and link to the topic area by clicking the link.

We recommend Adobe Reader version 10 or greater available at:

http://get.adobe.com/reader

CONTENTS

C87214 | C87030 FAQS................................................................................................... 1

AC Power ............................................................................................................................... 2

Batteries ................................................................................................................................ 2

Weather Station Factory Restart .................................................................................. 2

Outdoor Temperature Sensor......................................................................................... 3

Compatible Outdoor sensors............................................................................................. 3

Quick Connect ..................................................................................................................... 3

Outdoor Temperature Signal Strength............................................................................ 3

Dashes show for Outdoor Temperature.......................................................................... 3

Power Requirements .......................................................................................................... 3

Inaccurate Outdoor Temperature Reading..................................................................... 4

Intermittent Outdoor Temperature.................................................................................. 4

Outdoor Temperature is stuck or HH.H, LL.L................................................................. 4

Outdoor sensor drains batteries quickly......................................................................... 5

Outdoor Humidity goes to dashes when temperature is cold..................................... 5

Outdoor sensor fell. The sensor no longer works.......................................................... 5

Temperature Trend Arrows............................................................................................... 5

Humidity Trend Arrows...................................................................................................... 6

HI/LO Temperature readings............................................................................................ 6

Heat Index/Dew Point........................................................................................................ 6

Channels............................................................................................................................... 7

Multiple Outdoor Transmitters.......................................................................................... 7

Mounting/Positioning Outdoor sensor............................................................................. 7

Position Weather station.................................................................................................... 8

Distance/Resistance/Interference.................................................................................... 8

Temperature Alerts ........................................................................................................ 9

Weather Station.................................................................................................................. 9

Power Requirements .......................................................................................................... 9

12-Hour or 24-Hour time format ..................................................................................... 9

Fahrenheit/Celsius.............................................................................................................10

Backlight..............................................................................................................................10

Dashes, HH.H, LL.L or stuck Indoor Temperature/Humidity......................................10

Inaccurate Indoor Temperature Reading.......................................................................10

Set Time Alarm...................................................................................................................11

Activate/Deactivate time alarm.......................................................................................11

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 2

Snooze Alarm .....................................................................................................................11

Manually Set Time/Date: Program Menu .....................................................................11

Comfort Indicators.............................................................................................................12

Forecast Icons Inaccurate................................................................................................12

Weather station is dim......................................................................................................12

Weather station is blank: No letters, numbers or dashed lines ................................12

Weather station has missing segments .........................................................................13

AC Power

The design of this weather station is to use AC power (5-volt) as primary power source.

When operating with the AC power cord, the backlight can be on continually.

When operating on AC power, batteries are optional and are not required in the weather

station.

The backlight will turn off or operate at high or low intensity at your discretion.

Batteries

Explanation: Many problems are resolved with fresh batteries of the appropriate voltage.

Many items sent in under warranty work when tested with fresh batteries. Batteries

manufactured this year will have an expiration date 10 years (or more) in the future.

Battery technology has improved and batteries will maintain voltage longer in storage.

However, the environment the batteries reside in for the 10 years can deplete the power.

Use Alkaline or Lithium batteries in the outdoor sensor.

A minimum voltage of 1.48V for each battery is necessary for proper performance.

Use batteries dated at least six years in advance of the current year. Batteries dated

earlier than six years from now may still work, but may be unstable in performance.

Good name brand batteries make less noise, which reduces the chance of RF (radio

frequency) interference from the battery compartment.

Weather Station Factory Restart

Explanation: The factory restart returns the weather station and outdoor sensor to an

“out-of-the-box” default state and often resolves an issue.

Factory Restart:

1. Remove all power (batteries and AC) from outdoor sensor and weather station.

2. Press one of the buttons on the weather station at least 20 times to clear all memory.

3. Verify that the weather station is blank before proceeding (there may be lines painted on

the screen that will show when there is no power).

4. Leave both units without power for 15 minutes (very important).

5. Insert the AC power cord into the wall outlet then into the weather station.

6. Insert fresh batteries into the outdoor sensor.

7. Press the TX button on the outdoor sensor to transmit RF signal.

8. Keep the outdoor sensor 5-10 feet from the weather station.

9. When RF connection is established, the temperature will appear on the station. Allow the

outdoor sensor and weather station to sit together for 15 minutes to establish a strong

connection.

10.Do not press buttons for 15 minutes.

For optimum 433MHz transmission, place the outdoor sensor no more than 200 feet (60

meters, open air) from the weather station.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 3

See the section on mounting and distance/resistance/interference for details on

mounting the outdoor sensor.

Outdoor Temperature Sensor

Compatible Outdoor sensors

The TX141TH-BCH outdoor sensor comes packaged with this weather station.

The TX141TH-ACH and TX141TH-BCH (433MHz) outdoor sensors are compatible with

this weather station.

This station can read up to three outdoor sensors. The TX141TH-BCH allows you to

select channels to use this feature.

Quick Connect

Explanation: Use the quick connect for a weather station and outdoor sensor that have

been working but lost connection due to interference or low batteries. This is not the same

as a thorough factory reset.

1. Bring the outdoor sensor and weather station together inside, and place the units 5-10

feet apart with nothing between them.

2. Hold the HEAT/DEW button for 5 seconds. The outdoor temperature area will flash.

3. Remove battery cover from the outdoor sensor and press and release the TX button to

send the signal.

4. Wait for 2 minutes for the outdoor temperature to appear on the weather station.

Factory Restart: If the above procedure does not work, please try the factory reset.

Outdoor Temperature Signal Strength

Explanation: The weather station will search for the outdoor temperature/humidity outdoor

sensor for 3 minutes after batteries are installed or if you hold the HEAT/DEW button for 3

seconds.

The antenna symbol will flash during reception.

The temperature display will be dashes “---“.

If synchronization fails once, the antenna will lose one bar.

If synchronization fails twice, the antenna will lose two bars.

If RF (radio frequency) reception fails five times, the antenna symbol will show without

bars.

The antenna will show full display with successful RF (radio frequency) reception.

Dashes show for Outdoor Temperature

Explanation: Dashes mean the connection is lost between the weather station and the

outdoor sensor.

Batteries often resolve the connection.

Distance/Resistance can cause loss of connection between the outdoor sensor and the

weather station.

Turn the weather station 90 degrees towards the outdoor sensor to provide better

reception. This allows more antenna surface to face the outdoor sensor signal.

Try the quick connect or factory restart.

Power Requirements

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 4

2-AA batteries power the outdoor sensor.

We recommend Alkaline batteries for the outdoor sensor.

You may choose to use Lithium batteries for temperatures below -20°F/-28.8°C.

Inaccurate Outdoor Temperature Reading

Explanation: High outdoor temperature readings are generally a location issue. Low

outdoor temperature readings are power related or a sensors going bad.

The outdoor sensor reads the environment where it is mounted. When mounted inside

the home, it will read inside temperature/humidity.

When the outdoor sensor reads high during the day, but not at night, it is a positioning

problem.

Look for heat sources such as sunlight, door or window frames or reflected heat.

Side-by-side test: Place the outdoor sensor right next to the weather station for 2 hours.

Compare indoor and outdoor temperature. The temperatures should be within 4 degrees

to be within tolerance.

If the outdoor sensor reads correctly when next to the weather station, try a different

location outside.

Intermittent Outdoor Temperature

Explanation: Intermittent problems are the hardest to resolve. RF (radio frequency)

communication may come and go occasionally. This can be normal in some environments

(e.g. moister climates). If outdoor sensor signal is lost, please wait 2-4 hours for the signal

to reconnect on its own.

Move the outdoor sensor to a closer location.

Distance/Resistance can cause loss of outdoor sensor signal.

Check Batteries.

Freezer test: Confirm the weather station is reading the correct outdoor sensor (not a

neighbor’s sensor). Place the outdoor sensor in the freezer for an hour and watch the

temperature drop on the weather station.

Indoor distance test: Please complete the Restart with outdoor sensor and weather

station 5-10 feet apart and inside to establish a strong connection.

After 15 minutes, if there is a reading in the outdoor temperature area, move the

outdoor sensor to another room with one wall between the outdoor sensor and the

weather station.

Observe to see if the temperature remains on consistently for 1 hour.

If the temperature remains on while in the house, then it is likely a distance/resistance

issue.

Move the outdoor sensor to different locations outside to find a location where the

temperature reading will hold.

Outdoor Temperature is stuck or HH.H, LL.L

Explanation: These symbols are error messages indicating the outdoor sensor is outside of

its readable range.

Check Batteries.Overpowered or underpowered batteries can cause this reading.

Replace outdoor sensor.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 5

Note: The last outdoor reading may remain (not change) for several hours when connection

is lost. The outdoor temperature reading will flash when the connection is first lost or

intermittent.

Outdoor sensor drains batteries quickly

Test a new set of alkaline batteries. Write down the date of installation and the voltage

of the batteries.

When the batteries fail, please note the date and voltage again.

Check the distance and resistance between the outdoor sensor and weather station.

Outdoor sensors at the end of the range may work while batteries are fresh but not after

they drain a bit.

Check for leaking batteries, which may damage the outdoor sensor.

Battery life is over 24 months when using reputable battery brands for both Alkaline and

Lithium batteries.

Outdoor Humidity goes to dashes when temperature is cold.

The outdoor temperature/humidity sensor designed to work with this weather station

will drop the outdoor humidity and dew point reading in cold temperatures.

The humidity and dew point will return when the temperature rises. This is how the

sensor came from the factory. The temperature itself will continue to read.

Outdoor sensor fell. The sensor no longer works

Explanation: If there is no physical damage to the outdoor sensor, the fall may not have

caused internal damage. A fall can shock the outdoor sensor or the batteries in the outdoor

sensor. Batteries that have fallen on a hard surface may be damaged and unable to function

properly.

Complete a Restart with fresh batteries.

Use Batteries dated at least six years in advance of the current year. Batteries dated

earlier than six years from now may still work, but may be unstable in performance.

Note: A outdoor sensor that has fallen into puddle, snow, or other standing water, will likely

have water damage and need to be replaced. Outdoor sensors are water resistant, not

waterproof.

Replacement Outdoor sensors

Visit your local Retailer or La Crosse Technology® Store

http://store.lacrossetechnology.com/

Note: Be sure to order the correct model and frequency to avoid receiving the incorrect

item.

Call La Crosse Technology® Store at 608-785-7939 or e-mail from the store website if

you are unsure about the correct item to order. Each item carries the original new

product warranty and includes access to La Crosse Technology® technical support.

Temperature Trend Arrows

Explanation: The indoor and outdoor temperature (2°F / 1°C) trend indicators update

every 30 minutes or less. These trends represent temperature changes over the past three

hours.

Example: At 11:00, the trend arrows will reflect changes in temperature since 8:00. At

11:30, the trend arrows will reflect changes in temperature since 8:30, etc.

Two arrows show: No change

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 6

Arrows trending left: Temperature is falling.

Arrows trending right: Temperature is rising.

Humidity Trend Arrows

Explanation: The indoor and outdoor humidity (3% RH) trend indicators update every 30

minutes or less. These trends represent temperature changes over the past three hours.

Example: At 11:00, the trend arrows will reflect changes in humidity since 8:00. At 11:30,

the trend arrows will reflect changes in humidity since 8:30, etc.

Up Arrow:

Temperature has risen in the past 3 hours.

Humidity has risen in the past 3 hours.

Right Arrow:

Temperature has not changed in the past 3 hours.

Humidity has not changed in the past 3 hours.

Down Arrow:

Temperature has fallen in the past 3 hours.

Humidity has fallen in the past 3 hours.

HI/LO Temperature readings

Explanation: The weather station shows the daily LO and HI temperatures each day

starting at midnight (12:00 AM). The weather station automatically resets the HI/LO

temperatures at midnight (12:00 AM).

View HI data: Press the ▲button once to view HI temperature and humidity values for

indoor and outdoor data.

Reset HI data: Hold the ▲button for five seconds to reset HI temperature and

humidity values for indoor and outdoor data.

View LO data: Press the ▼button once to view LO temperature and humidity values

for indoor or outdoor data.

Reset LO data: Hold the ▼button for five seconds to reset LO temperature and

humidity values for indoor and outdoor data.

Heat Index/Dew Point

Heat Index:

Heat Index combines the effects of heat and humidity.

Heat Index is what the temperature feels to a human being.

As humidity increases, the body is unable to cool effectively.

The temperature will feel warmer.

View Heat Index: From the default time display, press the HEAT/DEW button once and

Heat Index will show instead of the outdoor ambient temperature.

Note: Heat index will be the same number as the temperature until the outdoor

temperature is above 26.7°C (80°F).

Dew Point Temperature:

Dew Point Temperature is the saturation point of the air, or the temperature to which

the air has to cool in order to create condensation.

The higher the dew points, the higher the moisture content of the air at a given

temperature.

View Dew Point Temperature: From the default time display, press the HEAT/DEW

button twice and Dew Point will show instead of the outdoor ambient temperature. The

words “Dew Point” will show near outdoor temperatures.

Note: Dew Point is lower than the actual temperature.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 7

Channels

Explanation: The forecast station will accommodate up to three remote outdoor

transmitters. The channel selection ▲button on the forecast station allows you to see the

temperature in various locations: outdoors, baby’s room, greenhouse, basement, etc.

Press and release the ▲button to view channel 1, 2 or 3 on the display when multiple

transmitters are used.

Note: You cannot change channels if only one transmitter is connected.

Multiple Outdoor Transmitters

To connect multiple remote transmitters to the forecast station:

Remove the battery cover from all the transmitters (leave off for setup).

Set the first outdoor transmitter to channel 1 and insert 2 AA batteries.

Set the second outdoor transmitter to channel 2 and insert 2 AA batteries.

Set the third outdoor transmitter to channel 3 and insert 2 AA batteries.

Press and hold ▲button on forecast station for 5-10 seconds.

The forecast station will search for all outdoor transmitters.

Press the TX button on the back of each outdoor transmitter to transmit RF signal.

When RF (radio frequency) connection is established, the respective temperature &

humidity of the selected channels will appear on the main unit.

Allow the transmitters and the forecast station to stay 5-10 feet apart for 15 minutes to

establish a solid connection.

Install the battery covers on each sensor.

After 15 minutes, place the remote transmitters in appropriate locations within range of

the display.

Press and release the ▲button to view channel 1, 2 or 3 on the display when multiple

transmitters are used.

Mounting/Positioning Outdoor sensor

First: Place the outdoor sensor in the desired shaded location and the weather station in

the home. Wait approximately 1 hour before permanently mounting the outdoor sensor to

ensure that there is proper reception.

POSITION

Outdoor:

Protect the outdoor sensor from standing rain or snow and from the overhead sun,

which can cause it to read incorrectly.

Mounting under an eave or deck rail works well.

If you choose, you can construct a small roof or box for the outdoor sensor. Be sure a

box has vents.

Mount the outdoor sensor on the North side where to prevent sun from causing incorrect

readings.

Mount at least 6 feet in the air for a strong RF (radio frequency) signal.

Do not mount the outdoor sensor on a metal fence. This significantly reduces the

effective range.

Outdoor sensors are water resistant, not waterproof.

Mount outdoor temperature sensor vertically.

Avoid more than one wall between the outdoor sensor and the weather station.

The HIimum transmitting range in open air is over 300 feet (91 meters).

Obstacles such as walls, windows, stucco, concrete and large metal objects can reduce

the range.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 8

Do not mount near electrical wires, transmitting antennas or other items that will

interfere with the signal.

RF (radio frequency) signals do not travel well through moisture or dirt.

MOUNT

Option 1:

Install one mounting screw (not included) into a wall.

Place the outdoor sensor onto the screw (hanging hole on the backside).

Gently pull down to lock the screw in place.

Option 2:

Insert the mounting screw through the front of the outdoor sensor and into the wall.

Tighten the screw to snug (do not over tighten).

Position Weather station

The weather station has a pull out stand to sit on a desk or table or can be wall

mounted.

Place within range of the outdoor sensor.

The maximum transmitting range in open air is 300 feet (91 meters).

Obstacles such as walls, windows, stucco, concrete and large metal objects can reduce

the range.

Choose a location 6 feet or more from electronics such as cordless phones, wireless

gaming systems, televisions, microwaves, routers, baby monitors, etc., which can

prevent signal reception.

Be aware of electrical wires and plumbing within a wall. This will interfere with RF (radio

frequency) signal reception.

Distance/Resistance/Interference

Distance:

The transmitting range in open air is over 300 feet (91 meters) between the outdoor

sensor and the weather station. This range is in open air with ideal conditions.

Consider what is in the signal path between the weather station and the outdoor sensor.

Avoid placing electronics in the signal path between the weather station and the outdoor

sensor.

Resistance:

Obstacles such as walls, floors, windows, stucco, concrete and large metal objects can

reduce the range.

When considering the distance between the outdoor sensor and the weather station (300

feet open air), cut that distance in half for each wall, window, tree, bush or other

obstruction in the signal path.

Closer is better.

Windows reflect the RF (radio frequency) signal.

Metal absorbs the signal and reduces the range.

Stucco has a metal mesh that absorbs the signal.

Do not mount the outdoor sensor on a metal fence. This significantly reduces the

effective range.

Interference:

Consider items in the signal path between the outdoor sensor and the weather station.

Sometimes a simple relocation of the outdoor sensor or the weather station will correct

the interference.

Windows can reflect the radio signal.

Metal will absorb the RF (radio frequency) signal.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 9

Stucco has a metal mesh that absorbs signal.

Avoid transmitting antennas: (ham radios, emergency dispatch centers, airports,

military bases, etc.)

Electrical wires (utilities, cable, etc.)

Vegetation is full of moisture and reduces signal.

It is difficult for RF (radio frequency) signal to travel through a hill.

Temperature Alerts

Explanation: The outdoor and indoor temperature alerts are set in two separate steps.

Set the alert value.

Arm/Disarm the alert.

Select Temperature Alert Values:

1. Hold 2 seconds, then release the ALERTS button to enter alert set mode.

2. Outdoor HI TEMP will flash OFF or ON.

3. Press and release the +/- buttons to select ON.

(If disarmed (OFF) skip the alert value and move to next alert)

4. Press and release ALERTS button and alarm value will flash.

2. Press and release the +/- buttons to adjust values.

3. Press and release the ALERTS button to confirm adjustments and

move to the next item.

Alert setting order:

Outdoor Temp HI

Outdoor Temp LO

Outdoor Hum HI

Outdoor Hum LO

Indoor Temp HI

Indoor Temp LO

Indoor Hum HI

Indoor Hum LO

ARM/DISARM Alerts

Hold 2 seconds, then release the ALERTS button to view High and Low alerts with

flashing.

Press the PLUS button to arm an alert.

Press the MINUS button to disarm an alert.

Weather Station

Power Requirements

This weather station is powered by a 5 volt AC power adapter

Alternatively, optional 3-AAA alkaline batteries may be used.

12-Hour or 24-Hour time format

Time can display in 12-hour (am, pm) or 24-hour format.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 10

Default is 12-hour time.

Use the Program Menu to switch time formats.

Fahrenheit/Celsius

Use the program menu to switch between Fahrenheit and Celsius.

Backlight

Try this exercise in a dim room. The weather station has a bright, dim and OFF setting for

the backlight. Wait 15 seconds after pressing the LIGHT HI-LO-OFF button to see if

backlight stays on. This will assure it is not in OFF mode.

1. Be sure the AC cord is plugged in correctly to the weather station and the outlet.

2. Remove the batteries.

3. Press the LIGHT HI-LO-OFF button. If the backlight comes on and the display is

active, your AC cord works.

4. Wait 15 seconds to see if the back light stays on.

5. If the backlight goes out after 15 seconds, repeat #3.

A/C adapter: The backlight is on continuously when operating the Forecast Station with

the 5-volt adapter.

Note: When the Adapter is NOT in use, the Hi/Low/Off light feature is not available.

HIGH: The backlight is defaulted to HI at setup when the Adapter is in use.

LOW: Press and release the HI-LOW-OFF button to dim the backlight.

OFF: Press and release the HI-LOW-OFF button again to turn the backlight off. Press and

release the HI-LOW-OFF button to return to full strength.

Note: When the backlight is off, press any button to activate the backlight for 10 seconds.

Battery power: When operating on battery power only, press and release the any button

and the backlight will show for 10 seconds.

Dashes, HH.H, LL.L or stuck Indoor Temperature/Humidity

Explanation: These symbols are error messages indication the indoor sensor is outside of

its readable range. For indoor readings, this is generally a power related issue.

Check that the AC power cord is inserted into a working outlet.

Batteries may be overpowered or underpowered. Remove batteries from the weather

station.

Press any button 20 times. Leave the weather station unpowered for 1-2 hours.

Install fresh Alkaline batteries with correct polarity.

If the indoor temperature is still shows dashes, HH.H or LL.L, the weather station may

need replacement.

Inaccurate Indoor Temperature Reading

Explanation: When the indoor temperature is inaccurate, it is often due to the location of

the display or overpowered/under powered batteries. You can test the accuracy at you

home.

Side-by-side test: Bring the outdoor sensor in the house and place it next to the weather

station for 2 hours.

Compare indoor and outdoor temperature. The temperature should be within 4 degrees

to be within tolerance.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-9620U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7078UF Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9090 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9032U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Weather History Interval Handbuch

La Crosse Technology

La Crosse Technology 082616 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology 308-1416v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9125TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7047U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7044U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8158U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology T83646v2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology 308-1412-3TX Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Abmessungen

La Crosse Technology

La Crosse Technology WS-9760U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-145B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2810U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S84107 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9119U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-6020U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9043U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9133BK-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84428 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung