La Crosse Technology WS9123IT Bedienungsanleitung

TEMPERATURE AND HUMIDITY WEATHER STATION

Model WS9123IT Instruction Manual

!!Please read carefully before operating!!

INTRODUCTION:

Congratulations on purchasing this tiny 915MHz Temperature and Humidity Weather

Station which displays the time, indoor temperature, and up to three outdoor temperatures

and humidity readings. With only two easy to use keys, this product is ideal for use in the

home or office.

« Instant Transmission+» is the up and coming state-of-the-art new

wireless transmission technology, exclusively designed and developed by

LA CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured

from the transmitters: follow your climatic variations in real-time!

FEATURES:

The Temperature Station

LCD

Display

Function

Keys

Hanging

Hole

Battery

compartment

cover

Removable

stand

Quartz clock in 12 or 24-hour time display (hour and minute, manually set)

Indoor and outdoor temperature reading in degree Celsius (°C) or Fahrenheit (°F)

Outdoor humidity reading in %RH

Can receive up to three outdoor transmitters

Minimum and Maximum records of indoor temperature, outdoor temperature and

outdoor humidity

Low battery indicator

Table standing or wall mountable

The Outdoor Thermo-Hygro Transmitter

Remote transmission of outdoor temperature and humidity to

Temperature Station by 915 MHz signals

Displays alternately the measured temperature and humidity

readings on LCD

Shower proof casing

Wall mounting case. Mounting at a sheltered place. Avoid direct

rain and sunshine.

SETTING UP:

When one transmitter is to be used

1. First, insert the batteries to the transmitter (see “How to install and replace

batteries in the Thermo-hygro transmitter”below).

2. Within 2 minutes of powering up the transmitter, insert the batteries to the

Temperature Station (see “How to install and replace batteries in the

Temperature station”below). Once the batteries are in place, all segments of the

LCD will light up briefly. Following the indoor temperature and the time as 12:00 will

be displayed. If they are not shown in LCD after 60 seconds, remove the batteries

and wait for at least 60 seconds before reinserting them. Once the indoor data is

displayed user may proceed to the next step.

3. After the batteries are inserted, the Temperature Station will start receiving data

signal from the transmitter. The outdoor temperature and humidity should then be

displayed on the Temperature station. If this does not happen after 2 minutes, the

batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 915 MHz transmission however, this should under good

conditions be a distance no more than 100 metres between the final position of the

Temperature Station and the transmitter (see notes on “Positioning” and “915 MHz

Reception”).

When more than one transmitter is to be used

1. User shall remove all the batteries from the temperature station and transmitters

and wait 60 seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the batteries to the

Temperature Station. Once the batteries are in place, all segments of the LCD will

light up briefly. Following the indoor temperature and the time as 12:00 will be

displayed. If they are not displayed in the LCD after 60 seconds, remove the

batteries and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature and humidity from the first transmitter (channel 1) should

then be displayed on the Temperature station. Also, the signal reception icon will be

displayed. If this does not happen after 2 minutes, the batteries will need to be

removed from both units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature

and humidity readings from the first transmitter are displayed on the temperature

station.

Note: User shall insert the batteries into the second transmitter within 30 seconds of

reception of the first transmitter.

6. The outdoor temperature and humidity from the second transmitter and the

"channel 2" icon should then be displayed on the Temperature station. If this does

not happen after 2 minutes, the batteries will need to be removed from all the units

and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and

outdoor data are displayed on the temperature station. Then within 2 minutes, the

channel 3 outdoor data from the third transmitter will be displayed and the channel

icon will shift back to "1" once the third transmitter is successfully received. If this

does not happen, user shall restart the setting up from step 1.

Note: User shall insert the batteries into the third transmitter within 30 seconds of

reception of the second transmitter.

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE STATION

The Temperature Station uses 2 x AAA, IEC LR3, 1.5V batteries.

When batteries need to be replaced, the low battery icon will appear

on the LCD. To install and replace the batteries, please follow the

steps below:

1. Lift up the battery compartment cover.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology C84343 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1611T Bedienungsanleitung

La Crosse Technology

La Crosse Technology V50EU Installationsanleitung

La Crosse Technology

La Crosse Technology 308-179ORV2 Abmessungen

La Crosse Technology

La Crosse Technology V21V3 Abmessungen

La Crosse Technology

La Crosse Technology T85258 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7038U Bedienungsanleitung

La Crosse Technology

La Crosse Technology M82738V2 Abmessungen

La Crosse Technology

La Crosse Technology C85845 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology T83653v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9125TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1711BLV2 Abmessungen

La Crosse Technology

La Crosse Technology WS-9002U Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA86515 Bedienungsanleitung

La Crosse Technology

La Crosse Technology T85647v2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology 308-1409B Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA84688 Abmessungen

La Crosse Technology

La Crosse Technology WS-7078TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417BW Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS7034UITCA Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-2316 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7394U Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Renkforce

Renkforce 1208067 Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung