La Crosse Technology T85647v2 Bedienungs- und Wartungshandbuch

Wireless Color Weather Station

Welcome!

--------------

Congratulations on your new Wireless Color Weather Station and welcome to the

La Crosse Technology family! This product was designed with you in mind by our

hometown team of weather enthusiasts based in La Crosse, Wisconsin.

Instructional Manual

Model: T85647v2

DC: 092218

Wireless Color Weather Station

Page | 2

Wireless Color Weather Station

Table of Contents

Step 1: Power Up

Step 2: Mounting Basics

Step 3: Set Time, Date, etc.

Setting Menu

Your Weather Station Features

WWVB Atomic Time

Backlight HI-LOW-OFF

Alarm Time

Deactivate/Activate Alarm

Snooze

Set Temperature Alerts

Arm/Disarm Temperature Alerts

MIN/MAX Temperatures

Temperature/Humidity Trend Arrows

Sensor Search

Heat Index | Dew Point| Mold Risk

Forecast

Forecast Trend Arrows

Low Battery

Restart

Help Us, Help You!

Let’s Be Social!

Care and Maintenance

Warranty and Support

Speciﬁcations

FCC Statement

Canada Statement

Page | 3

Wireless Color Weather Station

Insert batteries (in any order):

• 2-AA batteries into thermo-hygro sensor

• 5 volt power cord (required) into T85647v2 station

*3-AAA batteries for optional backup of your time and date

STEP 1: Power Up

STEP 2: Mounting Basics

Wait until your sensor information should be displayed on your station.

Here are a few quick tips for mounting your sensor:

• Keep out of direct sunlight & ensure the sensor is well-ventilated.

• We recommend mounting under a deck or eave facing north.

• Insert the mounting screw through the front of the sensor and into the wall.

• Tighten the screw to snug (do not over tighten).

• Be sure the outdoor sensor is mounted vertically to drain moisture.

• The maximum wireless transmission range is over 330 feet (100 meters) in open air, not including walls or

ﬂoors.

AAA

You can manually adjust your station’s settings:

1. Hold the TIME SET button for 3 seconds to enter settings menu.

2. Press and release the ARROW buttons to adjust the ﬂashing values. Hold to adjust quickly.

3. Press and release the TIME SET button to conﬁrm and move to the next item.

STEP 3: Set Time, Date, etc.

Page | 4

Wireless Color Weather Station

To begin: Hold the TIME SET button 2 seconds, then release, to enter the settings menu.

Use the ARROW buttons to adjust values. Press the TIME SET button to conﬁrm and move to next item.

Settings Menu

Settings order:

1. WWVB ON/OFF

2. Time Zone

3. DST ON/OFF

4. 12H/24H

5. Hour

6. Minutes

7. Year

8. Month

9. Date

10.Fahrenheit/Celsius

AST

EST

CST

MST

PST

AKT

HAT

Atlantic

Eastern

Central

Mountain

Pacific

Alaskan

Hawaiian

Time Zones

Note: When WWVB OFF is selected, the menu will move directly to 12/24

hour time setting.

Note: The weekday will set automatically as the year, month, and date

are set.

1. WWVB ON | OFF

2. Time Zone

3. DST ON | OFF

4. 12Hour | 24 Hour

5. Hour

7. Year

6. Minutes

8. Month

9. Date

10. Fahrenheit | Celsius

Page | 5

Wireless Color Weather Station

Your Weather Station Features

Alerts (HI-LO-OFF)

MIN/MAX | Low Battery

Trend Arrow

Indoor Temp

Mold Risk

MIN/MAX

Indoor Humidity

Forecast Symbols

Forecast Trend

AM/PM

Atomic Tower | DST

Alarm/Snooze

Weekday

Month/Date

Alerts (HI-LO-OFF)

MIN/MAX | Low Battery

Sensor Strength

Remote Temperature

Trend Arrow

Mold Risk

MIN/MAX

8Remote Humidity

8Trend Arrow

Atomic Time

9Trend Arrow

Page | 6

Wireless Color Weather Station

• From normal time display, press and release the TIME SET button to search for the WWVB time signal.

• Please be sure you have selected your time zone from the list in the Settings menu. When the Atomic time

signal is received, the station will set to the time zone selected. Default is Eastern Time.

• For information about WWVB visit: http://bit.ly/AtomicTime

WWVB Atomic Time

Backlight (HI-LOW-OFF)

• When operating with the power cable, the backlight is adjustable: HI-LOW-OFF.

• Press and release SNOOZE/LIGHT to adjust backlight.

• When operating on batteries only, the backlight will come on brieﬂy when the SNOOZE/LIGHT button

is pressed.

Alarm Time

The alarm will be active when alarm time is set.

1. Hold the ALARM button for 3 seconds to enter alarm settings.

2. The HOUR will show.

3. Press the ARROW buttons to adjust.

4. Press ALARM to conﬁrm and move to the minutes

5. The MINUTES will show.

6. Press the ARROW buttons to adjust.

7. Press ALARM to conﬁrm and exit settings.

Deactivate/Activate Alarm

• The alarm is active when set.

• Press and release the ALARM button to view alarm time. Then press and release the ALARM button to

deactivate or activate the alarm.

• The alarm icon (bell) will show when active.

• When the alarm sounds, press the SNOOZE/LIGHT button to silence the alarm for 10 minutes.

• The snooze icon Zz will ﬂash.

• Press any button except SNOOZE/LIGHT to silence the alarm for 24 hours.

Snooze

Page | 7

Wireless Color Weather Station

Set Temperature Alerts

• Hold the ALERTS button for 3 seconds until the remote HI alert value ﬂashes.

• Press and release the ARROW buttons to adjust the value. Hold to adjust quickly.

• Press and release the ALERTS button to conﬁrm and move to the next alert.

Alert order:

1. Remote HI

2. Remote LO

3. Indoor HI

4. Indoor LO

Arm/Disarm Temperature Alerts

1. Press and release the ALERTS button so the remote HI alert temperature shows and the word HI ﬂashes.

• Press UP ARROW to arm

• Press DOWN ARROW to disarm

2. Press and release the ALERTS button to conﬁrm and move to the remote LO, indoor HI and indoor LO

alerts.

3. A bell appears above and alert when armed.

4. If no alerts are active, OFF will show.

Tip: Setting the alerts is one step. Arming the alerts is a separate step (see below)

Remote HI Alert Remote LO Alert

Indoor HI Alert Indoor LO Alert

HI alert armed LO alert armed Alerts OFF

Page | 8

Wireless Color Weather Station

All MIN/MAX temperature/humidity records will reset automatically at 12:00 (midnight).

• Press and release the DOWN ARROW to view indoor/remote minimum readings.

• Press and release the UP ARROW to view indoor/remote maximum readings.

MIN/MAX Temperature Records

MINIMUM MAXIMUM

Temperature/Humidity Trend Arrows

• The temperature (2°F / 1°C) trend indicators update every 30 minutes.

• The humidity (3% RH) trend indicators update every 30 minutes or less.

• 3 hrs. increments which changes on every ½ hour e.g.: At 3:00 — compares to 12:00 data;

at 3:30 — compares to 12:30, etc.

Rising: Trend is rising over past 3 hours

Steady: No change

Falling: Trend is falling over past 3 hours.

Sensor Search

• Hold the HEAT/DEW button for 3 seconds to search for the remote temperature/humidity sensor.

• The strength signal icon will animate until the sensor signal is received, or for 3 minutes if no signal available.

Page | 9

Wireless Color Weather Station

Heat Index | Dew Point | Mold Risk

• Press the HEAT/DEW button once to view remote Heat Index.

• Press the HEAT/DEW button twice to view remote Dew Point.

• Press the HEAT/DEW button a third time to view indoor and remote Mold Risk (0, LOW, MED, HI)

Forecast

1. The weather station oers these 6 forecast icons based on barometric pressure.

2. When the forecast would normally be Rain or T-Storm and the outdoor temperature is below 32°F, the

forecast will show Snow.

3. Wind indicators will show on T-Storm and Snow forecast.

SUNNY PARTLY SUNNY CLOUDY RAIN T-STORM SNOW

Page | 10

Wireless Color Weather Station

Low Battery

• Battery by Outdoor Temperature, replace batteries in the sensor.

• Battery by Indoor Temperature, replace batteries in the weather station.

Forecast Trend Arrows

Rising: Weather will improve

Steady: No change

Falling: Weather will worsen

Intelligent Weather Forecast:

• This station learns. Please allow 7-10 days for barometric calibration.

• This will ensure an accurate personal forecast for your location.

Restart

When the outdoor readings show dashes:

• Bring the sensor in the house at least ﬁve feet from the forecast station.

• Remove batteries from the sensor, as well as, the batteries and AC adapter from the forecast station.

• Press any button 20 times.

• After 15 minutes insert batteries into the sensor and station and re-connect the adapter.

• Wait 15 minutes to establish a strong connection. Place sensor outside in shaded location.

Let’s Be Social!

If you have ideas for features or support solutions you’d like to see us make, please let us know!

We truly want to make owning a La Crosse Technology product not only a practical experience, but also a fun

one. So email us at: store@lacrossetechnology.com

Help Us, Help You!

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-9020U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7394U Bedienungsanleitung

La Crosse Technology

La Crosse Technology V16 Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA86515 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Abmessungen

La Crosse Technology

La Crosse Technology V10v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1416v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-9016U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology The Weather Channel WS-8500TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS2307 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8300U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1912 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7078TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7394U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1610TWC-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology V22-WRTH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9029U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2811U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6207 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9049 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1913U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology C83332 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung