La Crosse Technology WS9611 Bedienungsanleitung

WIRELESS 868 MHz WEATHER CLOCK

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this fancy Weather Clock with wireless 868MHz transmission

of outdoor temperature and display of indoor temperature and humidity. It is further acting as

a DCF-77 radio controlled clock with calendar display and alarm clock function. In addition,

sunrise/ sunset/ sun duration time as well as the moon phase are shown. With the totally 15

different weather forecast icons featured by "Weather man", users can easily observe the

forecast weather condition and will no longer worry the sudden weather change. This

innovative product is ideal for use in the home or office.

Instant Transmission+» is the up and coming state

the

art new wireless

transmission technology, exclusively designed and developed by LA CROSSE

TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from the

transmitters: follow your climatic variations in real-time!

FEATURES:

The Weather Clock

•

DCF-77 Radio controlled time with manual setting options

•

DCF Time reception ON/OFF

•

12/24 hour display

•

Hour, minute and second time display

•

Calendar (weekday, date, month and year)

•

Time zone option (-2h to +5h)

Foldout stand

Battery compartment cover

Function keys

LCD display

Function keys

Hanging hole

Function key

•

Alarm with snooze function

•

Snooze setting

•

Weather forecasting with 15 easy-to-read weather forecast signs featured by "Weather

man"

•

Weather forecasting icon sensitivity setting

•

Temperature display in degrees Celsius (°C) or Fahrenheit (° F) selectable

•

Indoor and outdoor temperature display with MIN/MAX recording

•

Indoor humidity reading displayed as RH% with MIN/MAX recordings

•

All MIN/MAX temperature recordings show date and time received

•

All MIN/MAX recordings can be reset

•

Display of sunrise time, sunset time and sun duration in 39 cities

•

12 Moon phases display throughout the year

•

Can take up to three outdoor transmitters

•

LCD contrast setting

•

Low battery indicator

•

LED backlight

•

Table standing/ Wall mounting

The Outdoor Temperature Transmitter

•

Remote transmission of outdoor temperature to Weather Clock

by 868 MHz

•

Shower proof casing

•

Wall mounting case (Mounting at a sheltered place. Avoid

direct rain and sunshine)

SETTING UP :

When one transmitter is used

1. First, insert the batteries into the Temperature transmitter. (see “Install and replace

batteries in the Temperature transmitter“).

2. Immediately after and within 45 seconds, insert the batteries into Weather Clock (see

“Install and replace batteries in the Weather Clock”). Once the batteries are in

place, all segments of the LCD will light up briefly. Following the time as 0:00 and the

"Weather man" icon will be displayed. If these are not displayed after 60 seconds,

remove the batteries and wait for at least 10 seconds before reinserting them.

3. After inserting the batteries, the Weather Clock will start receiving data from the

transmitter. The outdoor temperature and the signal reception icon should then be

displayed on the Weather Clock. If this does not happen after 3 minutes, the batteries

will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

Weather Clock and the transmitter (see notes on “Positioning” and “868 MHz

Reception”).

5. Once the remote temperature has been received and displayed on the Weather Clock,

the DCF time (radio controlled time) code reception is automatically started. This

takes typically between 3-5 minutes in good conditions. If after 10 minutes, the DCF

time has not been received, press the SET key to manually enter a time initially.

When more than one transmitter is used

1. User shall remove all the batteries from the Weather Clock and transmitters and wait

for 60 seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 25 seconds of powering up the first transmitter, insert the batteries to the

Weather Clock. Once the batteries are in place, all segments of the LCD will light up

briefly. Following time as 0:00 and the Weather man icon will be displayed. If they are

not shown in LCD after 60 seconds, remove the batteries and wait for at least 60

seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1) should then be

displayed on the Weather Clock. Also, the signal reception icon will be displayed. If

this does not happen after 2 minutes, the batteries will need to be removed from both

units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature

readings from the first transmitter are displayed on the Weather Clock.

Note: User shall insert the batteries into the second transmitter within 10 seconds of

reception of the first transmitter.

6. The outdoor data from the second transmitter and the "channel 2" icon should then be

displayed on the Weather Clock. If this does not happen after 2 minute, the batteries

will need to be removed from all the units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor

data are displayed on the Weather Clock. Then within 2 minutes, the channel 3

outdoor data from the third transmitter will be displayed and the channel icon will shift

back to "1" once the third transmitter is successfully received. If this is not happen,

user shall restart the setting up from step 1.

Note:

•

User shall insert the batteries into the third transmitter within 10 seconds of reception of

the second transmitter.

•

And user may require to check the displayed readings on the Weather Clock against

those shown on the transmitters in order to recognise the Channel No. of each

transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

Weather Clock and the transmitter (see notes on “Positioning” and “868 MHz

Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as

described above. Should transmission problems occur, it is necessary to remove the

batteries from all units and start again the set-up from step 1.

9. Once the remote temperature has been received and displayed on the Weather Clock,

the DCF time (radio controlled time) code reception is automatically started. This

takes typically between 3-5 minutes in good conditions.

If after 10 minutes, the DCF time has not been received, press the SET key to manually

enter a time initially.

Note:

Daily DCF reception is done at 02:00 and 03:00 every day. If the reception at 03:00 is not

successful, then at 04:00 and 05:00 and 06:00 there are other tries, until one is successful. If

the reception at 06:00 is still not successful, then the next try takes place at 02:00 next day.

If reception is successful, the received time will override the manually set time. The date is

also updated with the received time. (Please refer also to notes on “DCF-77 Radio

Controlled time” and “Manual Time Setting”)

INSTALL AND REPLACE BATTERIES IN THE WEATHER CLOCK

The Weather Clock uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Remove the cover at the back of the

Weather Clock.

2. Insert batteries observing the correct

polarity (see marking).

3. Replace compartment cover.

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The Temperature Transmitter uses 2 x AA, IEC LR6, 1.5V battery. To

install and replace the batteries, please follow the steps below:

1. Remove the battery compartment cover at the back of the

transmitter.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery compartment cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following

the setting up procedures. This is because a random security code is assigned by the

transmitter at start-up and this code must be received and stored by the Weather Clock in

the first 3 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure

optimum accuracy of these units (Battery life See Specifications below).

Please participate in the preservation of the environment. Return used

batteries to an authorised depot.

FUNCTION KEYS:

Weather Clock:

The Weather Clock has five easy to use function keys.

SET key

MIN/MAX key

ALM key

CH/+ key

SNOOZE/SUN key

SET key (Setting):

•

To enter the set mode for the following functions: LCD contrast, Time zone, Time

Reception ON/OFF, 12/24 hour display, Manual time, Year, Date, Sunrise/ Sunset city

location, Snooze time duration, °C/°F, and Weather forecast sensi tivity settings.

•

To toggle between the display of "Weekday + date + month", "Second", "Alarm time",

and "Date + month + year"

•

To press and hold for 3 seconds to reset at the same time the maximum/ minimum

temperature and humidity records of indoor and the currently selected outdoor channel

(will reset all records to current level)

•

To stop the alarm

•

To switch on the backlight

MIN/ MAX

•

To toggle between the maximum/ minimum outdoor temperature and maximum/

minimum indoor temperature and humidity data

Note: The Time/date shown is corresponding to MIN/MAX temperature data.

•

To stop the alarm

•

To switch on the backlight

ALM key (alarm)

•

Press for about 3 seconds to enter the Alarm setting mode

•

To activate/ deactivate the alarm

•

To stop the alarm

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology V22-WRTH Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1416v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS6835 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9004U Bedienungsanleitung

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WEATHER DIRECT WA-1242U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8025AL Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9013U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1710 Abmessungen

La Crosse Technology

La Crosse Technology WS-9711U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology V15 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WD-2511U Installationsanleitung

La Crosse Technology

La Crosse Technology WS-9410TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7208U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2316U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7212U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 082616 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-9630U-IT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2814U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology S82967 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415V3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1409BTV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology The Weather Channel WS-9005TWC Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Renkforce

Renkforce 1208067 Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung