Lantech IPES-0005B Series Bedienungsanleitung

IPES/IES-0005B/0008B Series

5/8 10/100TX (w/8/5 PoE at/af) Industrial Un-Managed Switch

User Manual

Aug. 2016

Recommendation for Shielded network cables

STP cables have additional shielding material that is used to reduce external interference.

The shield also reduces the emission at any point in the path of the cable. Our

recommendation is to deploy an STP network cable in demanding electrical environments.

Examples of demanding indoor environments are where the network cable is located in

parallel with electrical mains supply cables or where large inductive loads such as motors

or contactors are in close vicinity to the camera or its cable. It is also mandatory to use an

STP cable where the power device (like IP camera) is used outdoors or where the network

cable is routed outdoors.

Important Notice

Lantech Communications Global, Inc. reserves the right to modify the

equipment, its specification or this manual without prior notice, in the interest

of improving performance, reliability, or servicing. At the time of publication

all data is correct for the operation of the equipment at the voltage and/or

temperature referred to. Performance data indicates typical values related to

the particular product.

No part of this documentation or information supplied may be divulged to any

third party without the express written consent of Lantech Communications

Global Inc. Products offered may contain software which is proprietary to

Lantech Communications Global Inc. The offer or supply of these products

and services does not include or infer any transfer of ownership.

Interference Issues

This Equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

commercial or industrial installation. This equipment generates, uses, and

can radiate radio frequency energy. It may cause harmful interference to

radio communications if the equipment is not installed and used in

accordance with the instructions.

FCC Warning

This Equipment has been tested and found to comply with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy. It may cause harmful interference to radio

communications if the equipment is not installed and used in accordance

with the instructions. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

Content

Chapter 1 Introduction.............................................5

Specification............................................................. 5

Chapter 2 Hardware Description ............................7

2.1 Physical Dimension........................................ 7

2.2 Package Content:........................................... 8

2.3 IP Protection................................................... 9

2.4 LED Indicators.............................................. 12

Chapter 3 Hardware Installation...........................13

Chapter 1 Introduction

Lantech IPES/IES-0005B/0008B Series is a high performance IP41 industrial switch with

8/5 x10/100TX (w/8/5 PoE at/af injectors - IPES model) by M12 connectors which

provides L2 wire speed and advanced security function for connecting PD network.

Specification

For latest product specifications, please refer to Lantech official site.

IES/IPES-0005B series

Hardware Specification

IEEE

Standard

IEEE802.3 10BASE-T Ethernet

IEEE802.3u 100BASE-T Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE802.3at/af Power over Ethernet

Transfer

Rate

14,880pps for Ethernet port

148,800pps for Fast Ethernet port

Mac

Address

8K MAC address table

Connector

10/100T: 5 x M12, 4-pole D-coded, Female with auto MDI/MDI-X function

Power connector: 1 x M12, 5-pole A-coded, Male

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green),

Ethernet: Link/Activity (Green)

PoE Pin

Assignme

RJ-45 port # 1~#5 support IEEE 802.3af/at End-point, Alternative A mode. Per port provides 15.4W/30W ability.

Positive (VCC+): RJ-45 pin 1,2.

Negative (VCC-): RJ-45 pin 3,6.

Power

Supply

Dual input

9.5~56VDC for PoE feeding (12V model)

50.4~90VDC for PoE feeding (72V model)

Power

Consumpti

10W for 12/24/48VDC

13.5W for 72V

Power

Budget

80W for 12V input

120W for 24V input

80W for 72V Input

Operating

Humidity

5% to 95% (Non-condensing)

Operating

Temperatu

-40°C ~ 75°C (-40°F ~ 167°F)

Storage

Temperatu

-40°C ~ 85°C (-40°F ~ 185°F)

Case

Dimension

Aluminum case, IP-41

135mm(W)x165mm(H)x62mm(D)

Weight

700g

Installation

Din Rail**, Wall Mount Design

EMC

FCC Class A,

CE EN61000-4-2 (ESD),

CE EN61000-4-3 (RS),

CE EN-61000-4-4 (EFT),

CE EN61000-4-5 (Surge),

CE EN61000-4-6 (CS),

CE EN61000-4-8 (Magnetic Field),

CE EN61000-6-2,

CE EN61000-6-4

Stability

Testing

IEC61373 (Shock), EN61373 (Shock and Vibration)

Certificate

s & Report

EN50155/EN50121-3-2/EN50121-4 Certificate

EN45545-2 R24 (EN ISO 4589-2, EN ISO 5659-2, NF X70-100-1 & 2) Fire & Smoke Certificate

Warranty

5 years

**Optional

IES/IPES-0008B series

Hardware Specification

IEEE Standard

IEEE802.3 10BASE-T Ethernet

IEEE802.3u 100BASE-T Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE802.3at/af Power over Ethernet

Transfer Rate

14,880pps for Ethernet port

148,800pps for Fast Ethernet port

Mac Address

8K MAC address table

Connector

10/100T: 8 x M12, 4-pole D-coded, Female with auto MDI/MDI-X function

Power connector: 1 x M12, 5-pole A-coded, Male

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green),

Ethernet: Link/Activity (Green)

PoE Pin

Assignment

RJ-45 port # 1~#8 support IEEE 802.3af/at End-point, Alternative A mode. Per port provides 15.4W/30W ability.

Positive (VCC+): RJ-45 pin 1,2.

Negative (VCC-): RJ-45 pin 3,6.

Power Supply

Dual input

9.5~56VDC for PoE feeding (12V model)

50.4~90VDC for PoE feeding (72V model)

Power

Consumption

10W for 12/24/48VDC

13.5W for 72V

Power Budget

80W for 12V input

120W for 24V input

80W for 72V Input

Operating Humidity

5% to 95% (Non-condensing)

Operating

Temperature

-40°C ~ 75°C (-40°F ~ 167°F)

Storage

Temperature

-40°C ~ 85°C (-40°F ~ 185°F)

Case Dimension

Aluminum case, IP-41

135mm(W)x165mm(H)x62mm(D)

Weight

700g

Installation

Din Rail**, Wall Mount Design

EMC

FCC Class A,

CE EN61000-4-2 (ESD),

CE EN61000-4-3 (RS),

CE EN-61000-4-4 (EFT),

CE EN61000-4-5 (Surge),

CE EN61000-4-6 (CS),

CE EN61000-4-8 (Magnetic Field),

CE EN61000-6-2,

CE EN61000-6-4

Stability Testing

IEC61373 (Shock), EN61373 (Shock and Vibration)

Certificates &

Report

EN50155/EN50121-3-2/EN50121-4 Certificate

EN45545-2 R24 (EN ISO 4589-2, EN ISO 5659-2, NF X70-100-1 & 2) Fire & Smoke Certificate

Warranty

5 years

**Optional

Chapter 2 Hardware Description

In this paragraph, it will describe the Industrial switch’s hardware spec, port, cabling

information, and wiring installation.

2.1 Physical Dimension

Aluminum case. IP-41,

2.2 Package Content:

Manual CD* Product

*By request

2.3 IP Protection

The IP Code, Ingress Protection Rating, sometimes also interpreted as International

Protection Rating, classifies and rates the degree of protection provided against the

intrusion (including body parts such as hands and fingers), dust, accidental contact, and

water in mechanical casings and with electrical enclosures. It is published by the

International Electrotechnical Commission (IEC)

Solid particle protection

The first digit indicates the level of protection that the enclosure provides against access

to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid

foreign objects.

Level

Object size

protected against

Effective against

—

No protection against contact and ingress of objects

>50 mm

Any large surface of the body, such as the back of a

hand, but no protection against deliberate contact

with a body part

>12.5 mm

Fingers or similar objects

>2.5 mm

Tools, thick wires, etc.

>1 mm

Most wires, screws, etc.

Dust protected

Ingress of dust is not entirely prevented, but it must

not enter in sufficient quantity to interfere with the

satisfactory operation of the equipment; complete

protection against contact

Dust tight

No ingress of dust; complete protection against

contact

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lantech Schalten Handbücher

Lantech

Lantech IPGS-0005T-4 Bedienungsanleitung

Lantech

Lantech IPES-2208CA Bedienungsanleitung

Lantech

Lantech IPES-0008B Series Bedienungsanleitung

Lantech

Lantech IES-2008 Bedienungsanleitung

Lantech

Lantech LES-2400-RPS Bedienungsanleitung

Lantech

Lantech IES-0008B Series Bedienungsanleitung

Lantech

Lantech IES-2008B-DNV Bedienungsanleitung

Lantech

Lantech IPES-0204DFT-4 Bedienungsanleitung

Lantech

Lantech IGS-0208GSFP Bedienungsanleitung

Lantech

Lantech 5 10/100TX w/ 4 PoE Injector Industrial... Bedienungsanleitung

Lantech

Lantech TPGS-L6208XT Bedienungsanleitung

Lantech

Lantech IPES-0104GT-4 Bedienungsanleitung

Lantech

Lantech LPES-2224C Bedienungsanleitung

Lantech

Lantech IGC-0101DSFP Bedienungsanleitung

Lantech

Lantech IES-5216DF Bedienungsanleitung

Lantech

Lantech IGS-0016 Bedienungsanleitung

Lantech

Lantech LGS-2300-RPS Bedienungsanleitung

Lantech

Lantech TES-R6616XFT Bedienungsanleitung

Lantech

Lantech IES-22812F-2P Bedienungsanleitung

Lantech

Lantech IPGS-5008T Series Bedienungsanleitung

Lantech

Lantech IES-3416DSFP Bedienungsanleitung

Lantech

Lantech IPES/IES-0008B Series Bedienungsanleitung

Lantech

Lantech LES-2400-RPS Bedienungsanleitung

Lantech

Lantech IES-2208CA-DNV Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung