Lantronix SecureBox SDS2100 Bedienungsanleitung

Part No. 900-345

Rev. A April 2004

SecureBox

SDS2100

User Guide

SDS2100 User Guide

transmitted or reproduced in any form or by any means without the written permission

of Lantronix. Printed in the United States of America.

Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of

The Open Group. Windows 95, Windows 98, Windows 2000, and Windows NT are

trademarks of Microsoft Corp. Netscape is a trademark of Netscape Communications

Corporation.

Contacts

Lantronix Corporate Headquarters

15353 Barranca Parkway

Irvine, CA 92618, USA

Phone: 949-453-3990

Fax: 949-453-3995

Technical Support

Phone: 800-422-7044 or 949-453-7198

Fax: 949-450-7226

Online: www.lantronix.com/support

Email [email protected]

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix

web site at http://www.lantronix.com/about/contact/index.html

SDS2100 User Guide

Disclaimer & Revisions

Operation of this equipment in a residential area is likely to cause interference in

which case the user, at his or her own expense, will be required to take whatever

measures may be required to correct the interference.

Note: This product has been designed to comply with the limits for a Class A

digital device pursuant to Part 15 of FCC Rules. These limits are designed to

provide reasonable protection against such interference when operating in a

commercial environment. This equipment generates, uses, and can radiate

radio frequency energy, and if not installed and used in accordance with this

guide, may cause harmful interference to radio communications.

Changes or modifications to this device not explicitly approved by Lantronix will void

the user's authority to operate this device.

The information in this guide may change without notice. The manufacturer assumes

no responsibility for any errors that may appear in this guide.

Note: Export Control Classification Number 5A002, License exception ENC. The

following export agreement is required for encryption:

I agree that I will not export or re-export this product or firmware to a national resident

of Cuba, Iran, Iraq, Libya, North Korea, Sudan, Syria or any other country to which

the United States has embargoed goods; or to anyone on the US Treasury

Department's list of Specially Designated Nationals and Blocked Persons, US

Commerce Department's Table of Denial Orders and Entitles List, or the US State

Department's Debarred List. By receiving this product, I am agreeing to the foregoing

and I am representing and warranting that I am not located in, under the control of, or

a national or resident of any such country or on any such list.

Date Part No. Rev. Comments

4/03 900-345 A

Initial Document

SDS2100 User Guide

Declaration of Conformity

(according to ISO/IEC Guide 22 and EN 45014)

Manufacturer’s Name & Address:

Lantronix 15353 Barranca Parkway, Irvine, CA 92618 USA

Declares that the following product:

Product Name Model: SecureBox Device Server SDS2100

Conforms to the following standards or other normative documents:

Safety:

EN60950:1992+A1, A2, A3, A4, A11

Electromagnetic Emissions:

EN55022: 1994 (IEC/CSPIR22: 1993)

FCC Part 15, Subpart B, Class A

IEC 1000-3-2/A14: 2000

IEC 1000-3-3: 1994

Electromagnetic Immunity:

EN55024: 1998 Information Technology Equipment-Immunity Characteristics

IEC61000-4-2: 1995 Electro-Static Discharge Test

IEC61000-4-3: 1996 Radiated Immunity Field Test

IEC61000-4-4: 1995 Electrical Fast Transient Test

IEC61000-4-5: 1995 Power Supply Surge Test

IEC61000-4-6: 1996 Conducted Immunity Test

IEC61000-4-8: 1993 Magnetic Field Test

IEC61000-4-11: 1994 Voltage Dips & Interrupts Test

(L.V.D. Directive 73/23/EEC)

Supplementary Information:

This Class A digital apparatus complies with Canadian ICES-003 (CSA) and has

been verified as being compliant within the Class A limits of the FCC Radio

Frequency Device Rules (FCC Title 47, Part 15, Subpart B CLASS A), measured to

CISPR 22: 1993 limits and methods of measurement of Radio Disturbance

Characteristics of Information Technology Equipment. The product complies with the

requirements of the Low Voltage Directive 72/23/EEC and the EMC Directive

89/336/EEC.

Encryption: This product includes AES encryption certified by the National Institute of

Standard and Technology to FIPS-197 standard certification #120.

Export Control Classification Number 5A002, License exception ENC.

Manufacturer’s Contact:

Director of Quality Assurance, Lantronix

15353 Barranca Parkway, Irvine, CA 92618 USA

Tel: 949-453-3990

Fax: 949-453-3995

SDS2100 User Guide

Warranty

Lantronix warrants each Lantronix product to be free from defects in material and

workmanship for a period of TWO YEARS after the date of shipment. During this

period, if a customer is unable to resolve a product problem with Lantronix Technical

Support, a Return Material Authorization (RMA) will be issued. Following receipt of an

RMA number, the customer shall return the product to Lantronix, freight prepaid.

Upon verification of warranty, Lantronix will -- at its option -- repair or replace the

product and return it to the customer freight prepaid. If the product is not under

warranty, the customer may have Lantronix repair the unit on a fee basis or return it.

No services are handled at the customer's site under this warranty. This warranty is

voided if the customer uses the product in an unauthorized or improper way, or in an

environment for which it was not designed.

Lantronix warrants the media containing its software product to be free from defects

and warrants that the software will operate substantially according to Lantronix

specifications for a period of 60 DAYS after the date of shipment. The customer will

ship defective media to Lantronix. Lantronix will ship the replacement media to the

customer.

* * * *

In no event will Lantronix be responsible to the user in contract, in tort (including

negligence), strict liability or otherwise for any special, indirect, incidental or

consequential damage or loss of equipment, plant or power system, cost of capital,

loss of profits or revenues, cost of replacement power, additional expenses in the use

of existing software, hardware, equipment or facilities, or claims against the user by

its employees or customers resulting from the use of the information,

recommendations, descriptions and safety notations supplied by Lantronix. Lantronix

liability is limited (at its election) to:

refund of buyer's purchase price for such affected products (without interest)

repair or replacement of such products, provided that the buyer follows the above

procedures.

There are no understandings, agreements, representations or warranties, express or

implied, including warranties of merchantability or fitness for a particular purpose,

other than those specifically set out above or by any existing contract between the

parties. Any such contract states the entire obligation of Lantronix. The contents of

this document shall not become part of or modify any prior or existing agreement,

commitment or relationship.

For details on the Lantronix warranty replacement policy, go to our web site at

http://www.lantronix.com/support/warranty/index.html

SDS2100 User Guide

Contents

Contacts___________________________________________________________ 2

Disclaimer & Revisions _______________________________________________ 3

Declaration of Conformity _____________________________________________ 4

Warranty __________________________________________________________ 5

Contents___________________________________________________________ 6

1: Introduction __________________________________________________9

Features___________________________________________________________ 9

Protocol Support ____________________________________________________ 9

Connections and Pinouts_____________________________________________ 10

SDS2100 Serial Ports ___________________________________________________ 10

Serial Connector Pinouts _________________________________________________ 10

Network Port___________________________________________________________ 11

Ethernet Connector Pinouts_______________________________________________ 11

LEDs ____________________________________________________________ 11

Product Information Label ____________________________________________ 12

Technical Specifications _____________________________________________ 13

2: Getting Started_______________________________________________14

Addresses and Port Number __________________________________________ 14

Ethernet (MAC) Address _________________________________________________ 14

Internet Protocol (IP) Address _____________________________________________ 14

Port Number___________________________________________________________ 14

Physically Connecting the Unit_________________________________________ 15

Methods of Assigning the IP Address ___________________________________ 16

DHCP____________________________________________________________ 16

AutoIP ___________________________________________________________ 17

DeviceInstaller _____________________________________________________ 17

Install the DeviceInstaller _________________________________________________ 17

Assign IP Address and Network Class_______________________________________ 18

Add the Unit to the Manage List____________________________________________ 21

Opening a Configuration Window __________________________________________ 21

ARP and Telnet ____________________________________________________ 22

Serial Port Login ___________________________________________________ 23

SDS2100 User Guide

3: Configuring the Unit___________________________________________24

Configuring via Web Browser _________________________________________ 24

Configuring via the Setup Mode Window ________________________________ 27

Using a Telnet Connection ________________________________________________ 27

Using the Serial Ports ____________________________________________________ 29

Server Configuration (Network Configuration)_____________________________ 30

IP Address_____________________________________________________________ 30

Set Gateway IP Address__________________________________________________ 30

Netmask ______________________________________________________________ 30

Change Telnet Configuration Password______________________________________ 31

DHCP Naming__________________________________________________________ 31

Channel 1 Configuration (Serial Port Parameters) _________________________ 32

Baudrate ______________________________________________________________ 32

I/F (Interface) Mode _____________________________________________________ 32

Flow__________________________________________________________________ 33

Port Number ___________________________________________________________ 33

Connect Mode__________________________________________________________ 33

Remote IP Address______________________________________________________ 37

Remote Port ___________________________________________________________ 37

DisConnMode __________________________________________________________ 37

Flush Mode (Buffer Flushing) ______________________________________________ 38

Pack Control ___________________________________________________________ 38

DisConnTime (Inactivity Timeout)___________________________________________ 39

Send Characters________________________________________________________ 39

Telnet Terminal Type ____________________________________________________ 40

Channel (Port) Password _________________________________________________ 40

Expert Settings ____________________________________________________ 40

TCP Keepalive time in s __________________________________________________ 41

ARP Cache timeout in s __________________________________________________ 41

Security Settings ___________________________________________________ 41

Disable SNMP__________________________________________________________ 41

SNMP Community Name _________________________________________________ 41

Disable Telnet Setup_____________________________________________________ 42

Disable TFTP Firmware Upgrade ___________________________________________ 42

Disable Port 77FE (Hex)__________________________________________________ 42

Disable Web Server _____________________________________________________ 42

Disable ECHO Ports _____________________________________________________ 42

Enable Enhanced Password_______________________________________________ 42

Enable Encryption_______________________________________________________ 42

SDS2100 User Guide

Factory Default Settings______________________________________________ 44

Exit Configuration Mode______________________________________________ 44

4: Updating Firmware____________________________________________45

Obtaining Firmware _________________________________________________ 45

Reloading Firmware_________________________________________________ 45

Via DeviceInstaller ______________________________________________________ 45

Via TFTP _____________________________________________________________ 47

Via Another Unit________________________________________________________ 48

Via the Serial Port ______________________________________________________ 49

5: Troubleshooting______________________________________________51

Technical Support __________________________________________________ 51

Monitor Mode______________________________________________________ 55

Via the Serial Port ______________________________________________________ 55

Via the Network ________________________________________________________ 55

Monitor Mode Commands ________________________________________________ 55

6: Binary to Hexadecimal_________________________________________57

Converting Binary to Hexadecimal______________________________________ 57

Connect Mode Options ______________________________________________ 58

Disconnect Mode Options ____________________________________________ 61

Flush Mode (Buffer Flushing) Options___________________________________ 63

Interface Mode Options ______________________________________________ 68

Pack Control Options________________________________________________ 69

Features

The SecureBox family of Secure Device Servers (SDS) allows serial devices such as

those listed below to securely connect and communicate over Ethernet networks

using the IP protocol family (TCP for connection-oriented stream applications and

UDP for datagram applications).

The SDS2100 Secure Device Server offers secure data communications using

Rijndael Advanced Encryption Standards (AES) and are certified by the National

Institute of Standard and Technology (NIST) to meet Federal Information Processing

Standards (FIPS) required for data communication on US government and

government contractor’s networks.

Security Alarms

Access Control Devices

Fire Control Panels

Time/Attendance Clocks and Terminals

ATM Machines

Data Collection Devices

RFID readers

Universal Power Supply (UPS) Management Units

Telecommunications Equipment

Data Display Devices

Protocol Support

The SDS uses the Internet Protocol (IP) for network communications and the

Transmission Control Protocol (TCP) to assure that no data is lost or duplicated, and

that everything sent to the connection arrives correctly at the target.

Other supported protocols are listed below:

ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for

network communications.

TCP, UDP, and Telnet for connections to the serial port.

TFTP for firmware updates.

IP for addressing, routing, and data block handling over the network.

SDS2100 User Guide 1: Introduction

User Datagram Protocol (UDP) for typical datagram applications in which

devices interact with other devices without maintaining a point-to-point

connection.

Connections and Pinouts

SDS2100 Serial Ports

The SDS2100 has two male DB9 DTE serial ports that support RS-232 serial

standards up to 115 Kbps.

Figure 1-1. Serial Interface

Serial Connector Pinouts

The unit's Male DB9 connector provides an RS-232C interface as would be found on

most modern computers. The default serial port settings are 9600 baud, 8 bits, no

parity, 1 stop bit, no flow control.

Figure 1-2. DB9 Male RS232 Serial DTE Connector

Male DB9 Serial Ports

Inhaltsverzeichnis

Andere Lantronix Server Handbücher

Lantronix

Lantronix xDirect Bedienungsanleitung

Lantronix

Lantronix MSS4 Bedienungsanleitung

Lantronix

Lantronix UDS1100 Bedienungsanleitung

Lantronix

Lantronix WiBox2100E Bedienungsanleitung

Lantronix

Lantronix MSS4-D Bedienungsanleitung

Lantronix

Lantronix MSS Bedienungsanleitung

Lantronix

Lantronix ETS16PR Bedienungsanleitung

Lantronix

Lantronix PremierWave XC Bedienungsanleitung

Lantronix

Lantronix SLC8 Bedienungsanleitung

Lantronix

Lantronix EDS4100 Bedienungsanleitung

Lantronix

Lantronix C 7/01 Bedienungsanleitung

Lantronix

Lantronix WiPort NR Bedienungsanleitung

Lantronix

Lantronix UDS200 Bedienungsanleitung

Lantronix

Lantronix DSTni-XPress DR Bedienungsanleitung

Lantronix

Lantronix UDS2100 Bedienungsanleitung

Lantronix

Lantronix SLC8 Bedienungsanleitung

Lantronix

Lantronix XPort Direct+ Bedienungsanleitung

Lantronix

Lantronix xSenso 2100 Bedienungsanleitung

Lantronix

Lantronix MatchPort b/g Pro Kurzanleitung zur Einrichtung

Lantronix

Lantronix XPortPro Bedienungsanleitung

Lantronix

Lantronix MatchPort AR Kurzanleitung zur Einrichtung

Lantronix

Lantronix UDS2100 Bedienungsanleitung

Lantronix

Lantronix XPress DR+ Bedienungsanleitung

Lantronix

Lantronix Com Port Redirector Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung