LaserLiner GreenLine-Laser 2 P Bedienungsanleitung

GreenLine-Laser 2 P

037.00.00A / Rev 01.06

Bedienungsanleitung

Operating instructions

Gebruiksaanwijzing

Betjeningsvejledning

Mode d´emploi

Instrucciones para su uso

Istruzioni d'uso

Instrukcja Obsługi

Käyttöohje

Instruções de uso

FIN

3-8

9-14

15-20

21-26

27-32

33-38

39-44

45-50

51-56

57-62

GreenLine-Laser 2 P

ENGLISH 9

Latest-generation green crossline laser – visible even in the

most unfavourable light conditions.

Crossline laser, 522-542 nm, with automatic alignment through magnetically

damped pendulum system, 3° self-levelling range. Green lasers are many times

more visible than customary red lasers. This allows applications over longer

distances and working in very bright ambient light conditions. Through the

rotatable housing, the lasers can be precisely positioned. The removable base

allows use either with or without a tripod. Precision: 2 mm/10 m. With

additional 650 nm plumb laser line.

Incl.: Base with adjustable feet, laser enhancement glasses (green), magnetic

target plate (green), charger, high-performance batteries and carrying case.

General safety instructions

Caution: Do not look directly into the beam. Lasers must be kept out of

reach of children. Never intentionally aim the device

at people. This is a quality laser measuring device

and is 100% factory adjusted within the stated

tolerance. For reasons of product liability, we must

also draw your attention to the following: Regularly check the calibration

before use, after transport and after extended periods of storage. We also

wish to point out that absolute calibration is only possible in a specialist

workshop. Calibration by yourself is only approximate and the accuracy of

the calibration will depend on the care with which you proceed.



Note: This product is a precision instrument that must be handled and

treated with care. Avoid shocks and impact. Always keep and carry in the

case! Switch all lasers off and secure the pendulum. For cleaning, use a soft

cloth and glass cleaner.

LASER LIGHT

DO NOT LOOK INTO

THE BEAM!

CLASS 2 M LASER

EN 60825-1:2001

Warranty:

The warranty period is 2 years from the date of purchase. The warranty

covers all material or manufacturing defects occurring during this time. The

following are excluded from warranty: Damage due to improper use (e.g.

operation with wrong type of current/voltage, connection to unsuitable

power source, fall onto hard surface, etc.) or improper storage, normal wear

and tear, and defects which only insignificantly impair the value or suitability

for use. Any tampering by unauthorised persons will render this warranty

void. In the event that you need to claim warranty, please take the complete

device together with all information and the invoice to one of our dealers or

send it in to Umarex-Laserliner.

GreenLine-Laser 2 P

ENGLISH10

1Window for vertical laser

line

2Window for horizontal

laser line

3On / Off switch

Transport securing

device

4Knob for precision

adjustment

5Base

6Adjustable feet

7Window for plumb

lasers

8Round vial for rough

adjustment

9Socket for mains

unit/charger

10 Battery compartment

11 Charging display

12 Control field for

activating the lasers

13 Laser / Battery charge

display



Note:

For transport, the GreenLine-Laser must always be switched off with the

transport securing device (3) so as to protect device from damage.

GreenLine-Laser 2 P

ENGLISH 11

Battery operation

The device can also be operated with

standard alkaline batteries (6 x type AA).

To do so, open the battery compartment

(10), remove the rechargeable batteries

and insert the new batteries as shown by

the symbols. Check for correct polarity.

Replace the cover. If the LED (13) blinks

constantly, the batteries must be

changed.



Note: If the device is too far off the horizontal (more than 3°), a warning

signal will sound and, if switched on, the lasers will blink. Align the device

using the adjustable feet or place on a more level surface. The round vial

(8) is provided as an aid to alignment.



Note: Do not expose batteries to excessive heat such as sunshine, fire, etc. Dry

batteries must not be recharged. Used batteries must not be disposed of as

household waste. Please take them to a collection point for used batteries or for

special waste. Ask your local authority for further details. Batteries with the

recycling symbol can also be returned to our dealerships or to our Technical

Service.

Charging the batteries:

• Fully charge the batteries before use.

• Plug the charger/mains adapter into the power socket and into socket (9).

• When LED (13) starts to blink, recharge the batteries.

Switching on: Turn the On/Off switch (3) to the right, thereby releasing the

transport securing device. The lasers can now be individually activated via the

control field (12).

GreenLine-Laser 2 P

ENGLISH12

Alignment

For approximate alignment, the upper part

of the device can be turned on the base.

Exact positioning can be done with the

adjusting knob (4). Because of the

adjustable feet (6), the device can also be

placed on surfaces which are not level.

Use with tripod

For easy use, the GreenLine-Laser can be

mounted on a tripod (5/8" thread). To do

this, the upper part must be removed from

the base.

Green laser technology

Unlike red lasers, green laser light can only be indirectly generated. Because

of the system, therefore, fluctuations may occur:

• Difference in brightness between horizontal and vertical laser line

• Different levels of line brightness between one device and another.

• The optimum operating temperature is 20°C. Outside of the working

temperature range of 0-40°C, green lasers become darker.

TIP: Before switching on the device, wait until it has had time to adjust to

the ambient temperature.

These fluctuations are excluded from claims.

GreenLine-Laser 2 P

ENGLISH 13

Technical data

Self-levelling range +3°

Precision line lasers +2 mm / 10 m

Precision plumb laser +4 mm / 10 m

Working range (depending on ambient brightness) ca. 30 m

Laser wavelength of line laser (green) 522 – 542 nm

Laser wavelength of plumb laser (red) 650 nm

Line laser / Laser output rating Classe 2 M / < 5 mW

Plumb laser / Laser output rating Classe 2 / < 1 mW

Rechargeable battery operating time /

Recharging time

ca. 8 h /

ca. 16 h

Battery operating time ca. 16 h / 6x Typ AA

Weight 1,9 kg

Operating temperature 0°C ... + 40°C

Storage temperature -10°C ... + 70°C

Order number 037.00.00 A

Subject to technical alterations 01/2006



Note:

Regularly check the calibration before use, after transport and after

extended periods of storage.



Information on precision:

Precision 2 mm / 10 m: Adjust the device using the adjusting screws

(6) in such a way that the bubble of the circular level (8) is exactly in

the middle.

Precision 3 mm / 10 m: Adjust so that the bubble of the circular level

is within the ring.

Checking the vertical line: Position the device about 5 m from a wall. Fix a

plumb bob with a line of 2.5 m length on the wall, making sure that the bob

can swing freely. Switch on the device and align the vertical laser to the plumb

line. The precision is within the specified tolerance if the deviation between the

laser line and the plumb line is not greater than ± 1.5 mm.

Checking the horizontal line:

Position the device about 5 m from a wall and

switch on the cross laser. Mark point B on the wall.

Turn the laser cross approx. 2.5 m to the right and

mark point C. Check whether the horizontal line

from point C is level with point B to within ± 2 mm.

Repeat the process by turning the laser to the left.

GreenLine-Laser 2 P

ENGLISH

Performing the calibration check:

3. Position the device as near as possible to the wall at the height of

point A1.

4. Turn the device

through 180° and

mark point A3. The

difference between

points A2 and A3 is

the tolerance.

Preparing the calibration check:

It is possible for you to check the calibration of the laser. To do this, position

the device midway between 2 walls, which must be at least 5 metres apart.

Switch the device on (Laser cross ON). The best calibration results are

achieved if the device is mounted on a tripod. 1. Mark point A1 on the wall.

2. Turn the device

through 180° and

mark point A2.

You now have a

horizontal reference

between points A1

and A2.

180°



Note: If points A2 and A3 are more than 2 mm / 10 m, the device is in

need of calibration. Contact your authorised dealer or else the UMAREX-

LASERLINER Service Department.

2,5 m

<2 mm = OK

180°

<2 mm / 10 m = OK

GreenLine-Laser 2 P

Art.-Nr: 090.120

max. ca. 330 cm

Art.-Nr: 080.70

Art.-Nr: 080.30

75°

max. 165 cm

min. 95 cm

max. 160 cm

www.laserliner.com

Zubehör (optional)

Accessories (optional)

Accessoires (optioneel)

Tilbehør (flere typer)

Accessoires (en option)

FIN

Accesorios (opcional)

Accessori (optional)

Akcesoria (opcja)

Lisämahdollisuuksia

valinnaisvarusteilla

Acessórios (opcional)

GmbH & Co KG

Donnerfeld 2

59757 Arnsberg, Germany

Tel.: +49 2932 638-300, Fax: -333

www.laserliner.com

Dirección de envío y de servicio

post-venta:

Telefon: +49 2932 638-300

Fax +49 2932 638-333

Indirizzo servizio manutenzione

- Indirizzo di spedizione

Telefono +49 2932 638-300

Fax +49 2932 638-333

Adres serwisu i wysyłki:

Telefon Serwisu+49 2932 638-300

Fax +49 2932 638-333

Huolto- ja lähetysosoite:

Puhelin +49 2932 638-300

Fax +49 2932 638-333

Endereço de serviço e envio:

Telefone +49 2932 638-300

Fax +49 2932 638-333

Service- und Versand-Anschrift:

Service-Telefon +49 2932 638-486

Fax +49 2932 638-489

Service- and Shipping Address:

Service phone +49 2932 638-300

Fax +49 2932 638-333

Service- en verzendadres:

Servicetelefoon +49 2932 638-300

Fax +49 2932 638-333

Service- og Postadresse

Service-Telefon +49 2932 638-486

Fax +49 2932 638-489

Livraison et expédition:

Telefon: +49 2932 638-300

Fax +49 2932 638-333

Umarex GmbH & Co KG

– Laserliner –

Möhnestraße 149, 59755 Arnsberg, Germany

[email protected]

FIN

GreenLine-Laser 2 P

LASERSTRAHLUNG

NICHT IN DEN

STRAHL BLICKEN!

LASER KLASSE 2 M

EN 60825-1:2001

Andere Handbücher für GreenLine-Laser 2 P

Inhaltsverzeichnis

Andere LaserLiner Messgerät Handbücher

LaserLiner

LaserLiner BeamControl-Master BCM Bedienungsanleitung

LaserLiner

LaserLiner DigiLevel Compact Bedienungsanleitung

LaserLiner

LaserLiner ClimaPilot Bedienungsanleitung

LaserLiner

LaserLiner MultiMeter-PocketBox Bedienungsanleitung

LaserLiner

LaserLiner BBQ-GasCheck Bedienungsanleitung

LaserLiner

LaserLiner CondenseSpot Pro Bedienungsanleitung

LaserLiner

LaserLiner MultiFinder Pro Bedienungsanleitung

LaserLiner

LaserLiner StarFinder Bedienungsanleitung

LaserLiner

LaserLiner WoodTester Bedienungsanleitung

LaserLiner

LaserLiner ZipLevel Plus 30 Bedienungsanleitung

LaserLiner

LaserLiner LaserMeter X20 Bedienungsanleitung

LaserLiner

LaserLiner RangeXtender 40 Bedienungsanleitung

LaserLiner

LaserLiner EasyCross-Laser Green Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder Pro Bedienungsanleitung

LaserLiner

LaserLiner AutoControl-Master ACM Bedienungsanleitung

LaserLiner

LaserLiner LaserRange-Master i3 Bedienungsanleitung

LaserLiner

LaserLiner StarFinder Plus Bedienungsanleitung

LaserLiner

LaserLiner ClimaHome-Check Bedienungsanleitung

LaserLiner

LaserLiner Quadrum OneTouch Green Bedienungsanleitung

LaserLiner

LaserLiner SuperSquare-Laser Bedienungsanleitung

LaserLiner

LaserLiner MultiWet-Master Compact Plus Bedienungsanleitung

LaserLiner

LaserLiner CondenseSpot XP Bedienungsanleitung

LaserLiner

LaserLiner LaserRange-Master T7 Bedienungsanleitung

LaserLiner

LaserLiner MultiMeter-Compact Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung