LaserLiner StarFinder Bedienungsanleitung

Leitungsortung

Locating cables

Lokaliseren van

leidingen

Lokalisering af

strømførende

ledninger

Détection de

câbles

Localización de

cables

Localizzazione

di cavi elettrici

Lokalizowanie

przewodów

Stud-Scan AC-Scan

4 cm

Metall

Metal

Metaal

Metal

Métal

Metal

Metallo

Metal

Holz

Wood

Hout

Træ

Bois

Madera

Legno

Drewno

2 cm

6 cm

110-

220

Volt

Laserliner

StarFinder

4 cm

Several integrated sensors make the StarFinder from Laserliner

to a highly effective detection tool. High functioning safety is

ensured by special warning signals.

OPERATING INSTRUCTIONS

1. Insert battery: To do so, open the battery compartment in

the back of the housing and insert a 9V battery

(E-Block/PP3/6LR61).

2. Switch on the StarFinder (button 6).

3. Select STUD-SCAN or AC-SCAN (6):

A. STUD-SCAN: For electronically detecting studs and joists in

dry walls (plaster fibreboard, wooden panels and other

non-metallic panelling). Use the SET button (4) to adjust

the measuring depth.

B. AC-SCAN: For localising live wires directly beneath the pla-

ster or behind wooden panels and other non-metallic

panelling. It is not possible to detect live wires in dry walls

with metal studs.

4. Measuring in STUD-SCAN mode

• Select STUD-SCAN (button 6). Select “Normal” (SET button).

This setting is ideal for plaster fibreboard panels installed in

one thickness (max. 2 cm).

• Select “Deep” (SET button) for two plaster fibreboard

panels installed on top of each other (max. 4 cm).

StarFinder

ENGLISH 7

Components

1Maximum display

2LE display

3Mode displays:

STUD / CAL / AC

4Measuring depth switch:

Normal / Deep /

Super-Deep

5Live wire warning

6ON / Mode change

STUD-SCAN (max.

measuring depth 6 cm)

AC-SCAN (max.

measuring depth 4 cm)

7Calibration

OFF:

Switch 4+6 together

• Select “Super-Deep” (SET button) for thick wooden panels

and floor constructions (parquet etc.), max. measuring

depth 6 cm.

• Place the tool against the wall.

•LED CAL (3) flashes: Press the calibration button (7) and

wait until calibration is completed. CAL OK: LED CAL (3)

lights permanently.

•Move the tool slowly across the surface.

IMPORTANT: The device must be in contact with the wall all

the time while measuring in StudScan-Mode. AC-Mode see

next page.

Tip 1: The position between the two markings is the mid-

point of the stud.

Tip 2: The position where you start is important: First place

the tool in a position where you know there is no stud.

Otherwise, the LED CAL (3) will blink. To verify: Move

the tool to another position a few centimetres away

and start measuring again.

Tip 3: The maximum display does not light up, even though

the LE display shows a reading. As soon as the most

intense display appears, the tool is over the edge of the

stud. Mark this point. Alternatively, increase the measu-

ring depth (SET button).

Tip 4: To avoid interference while scanning, keep your free

hand and other objects at least 15 cm away from the

StarFinder.

Tip 5: The StarFinder will only find the outside edge of double

studs and headers which may be fitted around doors,

windows and corners.

StarFinder

ENGLISH8

Then scan for the

other edge of the

stud.

Slide the tool sideways across the wall.

When the maximum display appears, you

have reached the edge of the stud.

Tip 6: Ensure that you have really detected a stud. To do so,

check on both sides whether other studs are present at

equal distances, usually at 30, 40 or 60 cm. Also check

that it is a stud by scanning at several places directly

above and below the position of the first find.

Tip 7: Textured ceilings: The ceiling must be covered with

cardboard to protect it. In this case, use the DeepScan

function.

CAUTION: If electric wires or metal or plastic pipes are

located near or in contact with a plaster fibreboard panel,

they may be identified by the StarFinder as studs. Always

switch off the power supply when working near electric wires.

SPECIAL THINGS TO NOTE WITH VARIOUS MATERIALS

It may not be possible to detect wooden studs or joists

through the following materials:

• Ceramic floor tiles

• Fitted carpeting with padded backing

• Wallpaper with metal fibres or metal foil

• Freshly painted, damp walls. These must have dried for at

least one week.

5. AC-SCAN

The StarFinder is able to detect the electrical fields of live

wires.

• Select AC-SCAN (button 6).

• Hold the tool in the air so that it is pointing away from any

live wires.

•LED CAL (3) flashes: Press the calibration button (7) and

wait until calibration is completed. CAL OK: LED CAL (3)

lights permanently.

•Move the tool slowly across the surface. Please refer also

Tip 1 on next page.

StarFinder

ENGLISH 9

CAUTION: Wires which are at a depth of more than 4 cm

may not be detected. Always switch off the power supply

when working near electric wires.

Tip 1: Depending on surface material electro-static

interference may occur when moving unit, LED’s will

light up. In this case move tool slowly over the wall

without touching surface.

Tip 2: Because of static charges, electric fields may be

detected at the side of the actual position of the wire.

To carry away these charges, lay your free hand on the

wall.

Tip 3: If you suspect that wires must be present but cannot

find any, this may be because they are shielded in

conduits. Use STUDSCAN in order to check the near

area.

Tip 4: The position where you start is important: To achieve

maximum sensitivity, start by placing the device in a

position which is known not to be near live wires.

Tip 5: With the Set Button (4) the sensivity can be adjusted.

The highest sensivity (max. 4 cm) can be found the the

mode "Super"-Deep.

Subject to technical alterations.

Warranty

The warranty is valid for 2 years from the date of purchase.

The warranty does not cover damage caused by improper use

or storage, normal wear and tear, or defects which only insi-

gnificantly impair the value of the product or its functioning.

Any tampering by unauthorised persons will render this war-

ranty void. In the event that you need to claim warranty, plea-

se take the complete device together with all information and

the invoice to one of our dealers or send it in to UMAREX-

Laserliner.

StarFinder

ENGLISH10

STUD-SCAN: Continuous current

monitoring in unshielded wires as soon

as an electrical field is detected.

MultiFinder Pro

Art-Nr: 080.960A

MeterMaster Pro Laser

Art-Nr: 080.930A

AQua-Master

AQM Pro 200

Art-Nr: 029.01.00A

Metal-Scan

5 cm

AC-Scan

2 cm

110-

220

Volt

10 cm

1 cm

3 cm

4 cm

Stud-Scan

www.laserliner.com

Elektronisches

Ortungsgerät

1. Leitungsortung

2. Balkenortung

3. Hohlraumortung

4. Bohrpunktsicherheit

Electronic Scanner

1. Locating cables

2. Locating posts and

beams

3. Locating cavities

4. Reliable drilling

Elektronisch

lokalisatieapparaat

1. Lokaliseren van

leidingen

2. Lokaliseren van

balken

3. Lokaliseren van

holle ruimten

4. Lokaliseren van

veilige boorpunten

Elektronisk

søgeinstrument

1. Lokalisering af

strømførende

ledninger

2. Lokalisering af

bjælker

3. Lokalisering af

hulrum

4. Lokalisering af

boreposition

Détecteur électronique

1. Détection de câbles

2. Détection de

poutres

3. Détection d’espaces

vides

4. Sécurité du perçage

Aparato localizador

electrónico

1. Localización de

cables

2. Localización de

vigas:

3. Localización de

espacios huecos

4. Seguridad en la

elección del punto de

taladro

Apparecchio

elettronico di

localizzazione

1. Localizzazione di

cavi elettrici

2. Localizzazione di

travi

3. Localizzazione di

cavità

4. Sicurezza nella

scelta del punto in cui

praticare il foro

Elektroniczny przyrząd

lokalizacyjny:

1. Lokalizowanie

przewodów

2. Lokalizowanie belek

3. Lokalizowanie

pustych przestrzeni

4. Pewne wyszukiwa-

nie miejsc do wiercenia

Elektroninen ilmaisin

1. Johtojen ilmaisu

2. Palkin ilmaisu

3. Onttojen tilojen

ilmaisu

4. Porauskohdan

turvallisuus

Detector electrónico

1. Localização de cabos

2. Localização de vigas

e estruturas

3. Localização de

espaços ocos

4. Furar com segurança

Elektronisk detektor

1. Lokalisering av

elledningar

2. Lokalisering av

reglar

3. Lokalisering av

hålrum

4. Borrsäkerhet

Elektronisk søke-

instrument

1. Detektering av

ledninger

2. Lokalisering av

bjelker

3. Lokalisering av

hulrom

4. Nøyaktig lokalise-

ring av borepunkter

Elektronik tarama

cihazı

1. Tesisat tarama

2. Kiriş tarama

3. Boş bölme tarama

4. Delme noktası

güvenliği

Электронный прибор

для обнаружения

скрытых элементов

строительных

конструкций

1. Обнаружение

электрических

проводов

2. Обнаружение

балок

3. Обнаружение

полостей

4. Безопасность

сверления

A quality product from

GmbH & Co. KG

Donnerfeld 2,

59757 Arnsberg, Germany

Tel: +49 2932 638-300, Fax: -333

www.laserliner.com

Artikel-Nr. 080.970A

Laserliner StarFinder

FIN

RUS

Andere Handbücher für StarFinder

Inhaltsverzeichnis

Andere LaserLiner Messgerät Handbücher

LaserLiner

LaserLiner DampCheck Bedienungsanleitung

LaserLiner

LaserLiner LaserCube Bedienungsanleitung

LaserLiner

LaserLiner PowerCheck Bedienungsanleitung

LaserLiner

LaserLiner ThermoMaster Plus Bedienungsanleitung

LaserLiner

LaserLiner CondenseSpot Pro Bedienungsanleitung

LaserLiner

LaserLiner SensoLite 120 Bedienungsanleitung

LaserLiner

LaserLiner LiveCheck Bedienungsanleitung

LaserLiner

LaserLiner AutoCross-Laser ACL 3 P Bedienungsanleitung

LaserLiner

LaserLiner 4K5 PN 150 Bedienungsanleitung

LaserLiner

LaserLiner DistanceMaster Compact Bedienungsanleitung

LaserLiner

LaserLiner LaserRange-Master T2 Bedienungsanleitung

LaserLiner

LaserLiner ClampMeter XP Bedienungsanleitung

LaserLiner

LaserLiner NovaMaster 800 Bedienungsanleitung

LaserLiner

LaserLiner MoistureFinder Compact Bedienungsanleitung

LaserLiner

LaserLiner CableChecker Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder One Bedienungsanleitung

LaserLiner

LaserLiner LaserRange-Master T7 Bedienungsanleitung

LaserLiner

LaserLiner AutoCross-Laser 2 Plus Bedienungsanleitung

LaserLiner

LaserLiner MultiMeter-Compact Bedienungsanleitung

LaserLiner

LaserLiner GreenLine-Laser 2 P Bedienungsanleitung

LaserLiner

LaserLiner MoistureMaster Compact Plus Bedienungsanleitung

LaserLiner

LaserLiner DistanceMaster Vision Bedienungsanleitung

LaserLiner

LaserLiner CompactPalm-Laser PowerBright Plus Bedienungsanleitung

LaserLiner

LaserLiner ThermoMaitre Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung