LCN ST-2701 Bedienungsanleitung

*27176*

27176

© Allegion 2014

Printed in U.S.A.

27176 Rev. 01/14-b

WARNING

Do not remove spring tube from this product. Extremely

strong springs inside. If repairs are necessary, return to

factory.

1

Mount closer body in pocket according to dimensions shown on

template. Wall of pocket must be reinforced to ensure mounting of

body.

2

Mount rod and shoe on door according to dimensions shown on

template.

3

Place arm on closer shaft with main arm 35°to closer body (see

illustration). Do not rotate closer shaft. Secure arm to shaft with

arm screw.

4

With door in closed position:

1. Pull closer main arm away from door.

2. Slowly release arm and insert rod into forearm (see

illustration).

5

Adjust arm to form slightly less than a 90°angle with door in

closed position. Secure with arm set screw. (see illustration)

6

Slowly open door into pocket. DO NOT FORCE if door will not

open completely. If door will not open completely into pocket,

adjust arm as shown in below illustrations.

Customer Service

1-877-671-7011 www.allegion.com/us

This product is not intended for use with conventional hinges or latching devices.

ST-2701

Installation Instructions

7

Closing speed adjustment.

CAUTION

Improper installation or regulation may result in personal

injury or property damage.

LImportant

• Regulation: Do not allow door to slam into frame. A “normal” closing time from 90°open position is 5 to 7 seconds, evenly divided

between main swing speed and latch swing speed. Use socket key furnished to adjust speed. To slow main speed of door, turn

regulating screw nearest shaft clockwise. To slow latch speed, turn regulating screw nearest latch clockwise.

• Backcheck: To increase backcheck intensity turn regulating screw farthest from hinge clockwise.

LDO NOT USE ABRUPT BACKHECK

8

Mount cover on closer body and secure with two cover screws. Tighten screws rmly.

9

If closing power needs to be increased, shim closer out from wall to a minimum 2 Z\x” pocket depth. This will provide an extra Z\x pound of

closing force at latch.

Andere LCN Türöffnungssystem Handbücher

LCN

LCN 3130 Series Bedienungsanleitung

LCN

LCN Benchmark III 9130 Bedienungsanleitung

LCN

LCN 4630CS Bedienungsanleitung

LCN

LCN Benchmark III 9140 Bedienungsanleitung

LCN

LCN 4040XP Bedienungsanleitung

LCN

LCN 4050 Series Bedienungsanleitung

LCN

LCN 3130-SEL Sentronic Bedienungsanleitung

LCN

LCN 4050 Track Series Bedienungsanleitung

LCN

LCN 2010 SERIES Bedienungsanleitung

LCN

LCN 4040XP Bedienungsanleitung

LCN

LCN 4050 Series Bedienungsanleitung

LCN

LCN 1450 Series Bedienungsanleitung

LCN

LCN Sentronic 2310-ME Bedienungsanleitung

LCN

LCN ELECTRIC AUTO-EQUALIZER 4630 Bedienungsanleitung

LCN

LCN 1450 Track Series Bedienungsanleitung

LCN

LCN 4020 Series Bedienungsanleitung

LCN

LCN 4050AT Bedienungsanleitung

LCN

LCN 4040SE Bedienungsanleitung

LCN

LCN 4031 CUSH Bedienungsanleitung

LCN

LCN 4600 Series Bedienungsanleitung

LCN

LCN 4110EDA Bedienungsanleitung

LCN

LCN 8310-2410 Bedienungsanleitung

LCN

LCN 8310-2420 Bedienungsanleitung

LCN

LCN 4412 HSA Bedienungs- und Wartungshandbuch

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Label

Label NEPTIS/LE Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Series Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Olide

Olide 120B Bedienungsanleitung

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung