Leader Fox CARGO Bedienungsanleitung

Instrucons for use of the e-bike

The seller is legally obliged to include the instrucon manual for the LEADER FOX electric bicycle with each product.

E – BIKE POWER RIDE

Family One

Dear users,

To ensure the opmal funconing of your e-bike, please read the E-LF product informaon carefully before

using it. By means of a conscienous descripon, we inform you in the following text about all details (including

device installaon, sengs and normal use of the display) related to the use of our display. This manual will also

help you to resolve any uncertaines and faults.

What is an e-bike?

An electric bicycle is a classic bicycle with an electric drive to assist in riding. The motor funcon is acvated by

pedalling, which is sensed by a special sensor located in the pedalling centre. So you have to pedal all the me

on the electric bike, the motor only helps you. You can also set the e-bike in moon using the control buon or

the accelerator, but only up to the maximum permied speed, i.e. 6 km/h (e.g. for walking assistance). The

maximum speed of a motor-assisted e-bike is 25 km/h with a tolerance of 10 % (when you reach this speed, the

motor switches o and you connue pedalling as on a normal bicycle). When the baery runs out or the motor

is switched o, you can ride the e-bike like a normal bicycle without any resistance.

An electric bicycle that complies with the European standard EN 15194-1 is treated as a normal bicycle in terms

of road trac law, i.e. you can ride on cycle paths, you do not need a driving licence and a helmet is only

compulsory up to the age of 18.

Foreword

Electric bike range factors

1. The range of an e-bike cannot be accurately determined because it is inuenced by many factors.

2. Tyre rolling resistance. LEADER FOX electric bikes use tyres with low rolling resistance and increased

puncture resistance. It is also important that the tyres are properly inated. So if you have under-inated

tyres on your e-bike, for example, your range will be reduced.

3. Weight of the electric bike. The lower the weight of the e-bike, the more range it has.

4. Baery status. It depends on whether the baery was fully charged before the ride. You should also take

into account that the higher the number of discharge cycles the baery has had, the lower its capacity.

Prole and surface of the route. The higher the elevaon, the worse the surface and the steeper the hills,

the shorter the range.

6. Driving mode. It depends on which of the driving modes you have set when driving.

7. Air resistance. It depends if you are riding a low-frame bike in an upright posion or if you are riding a

sporer bike and have the saddle set at the same height as the handlebars.

7. Wind strength. The stronger the wind at our backs, the longer the range and vice versa.

8. Weight of rider and load. The greater the weight, the shorter the range.

9.External temperature The lower the temperature, the lower the baery capacity.

Safety recommendaons

Baeries:

Do not throw the baery into the re. Do not use the baery with other devices. Do not disassemble or modify

the baery.

Do not connect the posive and negave poles of the baery with a metal object. Do not immerse the baery in

water.

The charger:

Do not disassemble or modify the charger Do not use to charge other baeries. Avoid impact and contact with

water. Do not touch the charger with wet hands. Keep the charger out of reach of children and pets.

Do not cover the charger or place other things on top of it.

When disconnecng the charger, do not pull the cable but the plug. Do not use the charger if it is obviously

damaged.

Baeries

Baery charging and maintenance:

Charge the baery in a dry environment to prevent damage from short circuits.

Charge the baery at least once every 3 months, even when the bike is not in use, to at least 60 % capacity.

Do not cover the baery or the charger.

Do not leave the baery connected to electricity at all mes.

Do not use the baery for other appliances. It is made specically for this model. Do not disassemble or

modify the baery case.

Do not throw into re or expose to extreme temperatures. The me to charge the baery from zero to 100

% is 1-5 hours.

Warranty for the drive:

The warranty covers those parts of the drive that are not suscepble to rough handling (packaging, electronics,

charger, etc.), these parts are covered by a 24-month warranty.

The warranty does not cover the chemical parts of the baery and the reducon in capacity caused by normal

use (39 % aer a period of two years), these parts are covered by a warranty of 12 months.

Charging:

The baery is the most expensive part of an electric bike, so pay extra aenon when handling, charging and

storing it. The baery is sensive to accurate charging, so for Li-ion baeries it is necessary to use only the

charger we supply. Plug the charger into a 220240 V mains supply, a 5 A fused circuit is sucient. The charger

itself will stop charging when all cells have reached full capacity.

We recommend that you always fully charge the baery aer each journey to ensure that you always have a

full baery capacity for your next journey. Charging the baery can take from 1 to 5 hours depending on the

state of the baery cells.

It should be carried out in a covered, dry area (moisture and water can damage the charger) at a temperature

of 5 to 40°C.

The charging process is indicated by a red LED on the charger. When the baery is charged and the charging

process is complete, it will light up green. The baery contains a charge indicator light (the charge indicator

light comes on when the charge indicator buon is pressed). Switch o the baery aer riding.

Normal baery behaviour:

If the engine stops running smoothly and starts running "jerkily", the baery may be too low. In this case,

switch o the electric drive system and connue without motor assistance as on a normal bicycle.

Baery overheang is a common occurrence and is not a fault. The baery is protected by a temperature

sensor and will automacally switch o in the event of excessive overheang. Wait for the baery to cool

down to normal operang temperature and connue riding.

If you feel that the overall baery capacity has dropped, this could be due to charging or operaon in nonideal

weather condions. Perform 3 full recharge cycles. Fully discharge the baery by driving and

then recharge to full capacity at room temperature.

If the status indicator shows that the baery is discharged, there is sll a minimum voltage in the baery to

protect it from damage, but it is not sucient to power the e-bike. Recharge the baery as soon as possible.

Never leave the baery completely discharged, as it could be damaged.

If the baery has been switched on for 30 minutes and the bike is not in use, it will switch o automacally.

Proper care of the baery extends its life.

LCD display

Product Name:

Supplier:

Bafang

Model: DP C221.CAN BUS

Electrical parameters:

Storage space Humidity: 30-70%

Operang temperature - 20 ~ 45 °C

Storage temperature - 20 ~ 50 °C

Funconal overview

Remaining distance display (depending on driving style)

Informaon display (baery, controller, HMI and sensor)

Display of error messages

Bluetooth funcon

CALORIES energy consumpon display

Seng support levels

Motor output power indicator

Backlight brightness seng

Lighng control

Baery capacity indicator

Speed display (including maximum and average speed, switching between km and miles)

Descripon of OLED Displays:

Kilometers/miles. Can be set according to customer preferences. Speed display: AVG SPEED, MAX SPEED, SPEED

(real me). Smart Baery Indicator: provides a reliable baery indicator, will not uctuate. With engine on/o.

BMS support. (need access to BMS informaon system support). Backlight brightness seng: 5 secons. 9step

PAS: 3-PAS/5-PAS/6-PAS/9-PAS... oponal. Odometer: odometer/distance travelled/driving me Error code display

Parameter seng: mulple parameters can be set via the USB port of the computer, including PAS level / wheel

diameter / voltage / speed limit... Maximum range: Maximum range is calculated with a fully charged baery, on

at terrain and with a slight headwind. Average range is calculated with ideal mode switching and slightly hilly

terrain

Assembly and disassembly

Mounng the display:

I must note that we are in a huge1.Remove the bracket from the display and then 2. Now connect the display

connector to the display placed on the handlebars. (suitable for the EB-Bus connector. making sure that the two

connectors remain parallel when pressed rmly together.k meout.

handlebar

Real-time battery capacity display

Support/assistance level indicator

while walking

The following symbol will appear th on thee display

When

The lights are on.

Bluetooth indicator

Speed unit

Digital speed display

Trip: Daily kilometres (TRIP)-

Total number of

kilometrs

ODO) - Maximum speed

(

MAX) -

(

Average speed

(

AVG) - Remaining

distance (RANGE) -

Energy consumpon

(

CALORIES) - Power

POWER) - Travel time

(

TIME

Service:Viz

service section

3.Then place the bracket on the boom of the display and ghten it with the M3.0*8 screw. Required torque:

Torque value: 1 N.m.

Denion of keys

down

Switch on/ of system

up/down

Normal operation

Switching the system on/o

Press and hold the buon (>2S) on the display, switch on the system. Press and hold the buon again

(>2S) shut down the system.

If the "Auto Power O Time" is set to 5 minutes (can be reset using the "Auto Power O" funcon, see "Auto

Power O"), the display will automacally turn o within the desired me when not in use. If the password

funcon is enabled, you must enter the correct password to use the system.

Assistance with walks

Walking assistance can only be acvated with a standing pedal.

Acvaon: press , unl this symbol appears . Then press and hold buon when the

symbol is displayed, The walking assistant is acvated. The symbol will ash and the pedelec

will move at approximately 4.5 km/h. Aer releasing the buon or no buon is pressed during 5S, the motor

automacally stops and switches back to level 0.

SERVIS

When a certain number of kilometres have been covered or the baery has been charged, "SERVICE" will appear

on the display. When the baery has been driven more than 5000 km (or 100 charge cycles), "SERVICE" will

appear on the display. Aer every 5,000 km, the display will show "SERVICE" each me. This funcon can be set in

the display sengs.

Baery capacity indicator

The baery capacity is shown in the top le corner of the display. Each full bar represents the remaining baery

capacity in percentage.

(as shown in the gure below):

Capacity

range

Indikátor

80%-100%

60%-80%

Inhaltsverzeichnis

Andere Leader Fox Roller Handbücher

Leader Fox

Leader Fox Orem 27,5+ Bedienungsanleitung

Leader Fox

Leader Fox Latona Bedienungsanleitung

Leader Fox

Leader Fox Exeter Bedienungsanleitung

Leader Fox

Leader Fox E-CROSS 020 Bedienungsanleitung

Leader Fox

Leader Fox Forenza Bedienungsanleitung

Leader Fox

Leader Fox Altar Bedienungsanleitung

Leader Fox

Leader Fox Lotus Bedienungsanleitung

Leader Fox

Leader Fox Acron Bedienungsanleitung

Leader Fox

Leader Fox Bend lady Bedienungsanleitung

Leader Fox

Leader Fox Braga Bedienungsanleitung

Leader Fox

Leader Fox Venosa Bedienungsanleitung

Leader Fox

Leader Fox Denver Bedienungsanleitung

Leader Fox

Leader Fox Harlan Bedienungsanleitung

Leader Fox

Leader Fox Bend Bedienungsanleitung

Leader Fox

Leader Fox Lucas Bedienungsanleitung

Leader Fox

Leader Fox Runner Bedienungsanleitung

Leader Fox

Leader Fox Arimo Bedienungsanleitung

Leader Fox

Leader Fox Kent Bedienungsanleitung

Leader Fox

Leader Fox Swan Bedienungsanleitung

Beliebte Roller Handbücher anderer Marken

TEKTRO

TEKTRO CHEETAH Bedienungsanleitung

Douglas

Douglas Vespa Sprint Installationsanleitung

PLAYTIVE

PLAYTIVE AS-2448 Bedienungsanleitung

Ebinger

Ebinger DONKEY XL Bedienungsanleitung

Flyer

Flyer Mountain Benutzerhandbuch

BackCountry eBikes

BackCountry eBikes Storm Bedienungsanleitung

equipmed

equipmed FreeRoam II Bedienungsanleitung

Yoto

Yoto Lion Bedienungsanleitung

WESTHILL BIKES

WESTHILL BIKES LINK Bedienungsanleitung

BAnff

BAnff eProdigy series Bedienungsanleitung

Winther

Winther 475 Bedienungsanleitung

Jetson

Jetson JBZL17 Bedienungsanleitung

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung

Carrera

Carrera impel Bedienungsanleitung

Afikim

Afikim Superlight SL-3 Bedienungsanleitung

CareCo

CareCo ZOOM Bedienungsanleitung

Douglas

Douglas Vespa G.S. Bedienungsanleitung

Gazelle

Gazelle with BOSCH System Bedienungsanleitung