Leister Comet 700 Bedienungsanleitung
Table of contents
1. Application COMET 700/500 4
1.1. Important safety instructions 4
1.2. Intended use 5
1.3. Non-intended use 5
2. Technical data COMET 700/500 6
3. Transport COMET 700/500 7
4. Your COMET 700/500 8
4.1. Type plate and identification 8
4.2. Scope of delivery 8
4.3. Optional accessories 8
4.4. Overview of device parts 9
4.5. Park position 10
4.6. Power supply interruption 10
5. Settings on COMET 700/500 11
5.1. Checking the position of the hot wedge 11
5.2. Contacting system setup 12
6. Quick Guide COMET 700/500 13
6.1. Switch on COMET 700/500 (upper line) 13
6.2. Switch o COMET 700/500 (lower line) 13
7. Control panel of the COMET 700 14
7.1. Control panel overview 14
7.2. Function keys 14
7.3. Display of the status LED 15
7.4. Display symbols of the status display 16
7.5. Display symbols of the function display 16
7.6. Display symbols of the working display 17
8. COMET 700 control panel setup menu 18
8.1. Menu navigation overview 18
8.2. Setting up, saving, and selecting recipes (Save recipes) 19
8.3. Entry of recipe names 21
8.4. Standby Mode 22
8.5. Advanced Mode 22
8.6. Duty Info 23
8.7. General Info 23
8.8. Warnings 23
8.9. Machine Setup 23
8.10. Application Mode 24
8.11. Set Values 24
8.12. Welding data recording and WLAN settings WLAN settings 25
8.13. Reset (Reset to defaults) 25
8.14. Day distance display 25
8.15. Key lock 26
Table of contents
3
9. Commissioning COMET 700 27
9.1. Work environment and safety 27
9.2. Preparation for welding 27
9.3. Welding process 29
10. Warnings and error messages COMET 700 31
11. COMET 500 control panel 32
11.1. Control panel overview 32
11.2. Status LED display 32
11.3. Display symbols 33
11.4. Setting the unit system 33
11.5. Key lock 33
12. Commissioning COMET 500 34
12.1. Work environment and safety 34
12.2. Preparation for welding 35
12.3. Welding process 37
13. COMET 500 errors 38
14. Frequently asked questions, causes, and measures COMET 700/500 38
15. Assembly of accessories COMET 700/500 39
15.1. Replacement of the drive/pressure rollers 39
15.2. Assembling the field kit 40
15.3. Assembling the guide bar 41
15.4. Assembling the drive roller extension 41
16. Maintenance COMET 700/500 42
17. Disposal COMET 700/500 43
18. Declaration of conformity COMET 700/500 43
4
The local supply voltage must match the nominal voltage specified on the device. If the line voltage
fails, switch o the main switch and place the welding machine in the park position. EN 61000-3-11;
Zmax = 0.324Ω + j 0.202Ω. Consult electricity supply company if necessary.
If the device is being used on construction sites, a fault current circuit breaker must be used to
protect site personnel from electrical shock due to dampness and moisture.
There is a danger to life
from electric shock due to electrical voltage. The welding machine must therefore only be connect-
ed to sockets and extension cables with a protective earth conductor. Protect the welding machine
from moisture and wet conditions. Prior to commissioning, check the power cord, the plug, and the
extension cable for electrical and mechanical damage. The welding machine may only be opened by
instructed, qualified personnel.
Risk of fire and explosion
The welding machine can become an ignition source for fire and explosion. It must therefore not be
used near explosive gases or flammable materials. To avoid burning of the material to be welded,
please read the material safety data sheet from the material manufacturer. The welding machine must
only be used in the open or in a well-ventilated area.
Risk of burns
Do not touch hot wedge and surrounding parts when hot. Only touch the device at the handles and
operating units. Always allow the device to cool down.
Caution
Warning
1.1. Important safety instructions
Read through the operating instructions before commissioning for the first time.
In addition to the safety instructions contained in the individual sections of this instruction manual, the following
regulations must always be observed.
1. Application COMET 700/500
We recommend that you always keep the instruction manual with the device.
You can find more information on the COMET 700/500 and the myLeister app at www.leister.com
Congratulations on purchasing your COMET 700 or 500.
You have chosen a first-class hot-wedge welding machine.
It was developed and produced in accordance with the latest technology in the plastics-processing industry.
It has also been manufactured using high-quality materials.
COMET 700/500
Hot wedge welding machine
Operating Manual (Translation of the Original User Manual)
5
Material Material thickness reference value Hot Wedge
PE-HD, PP 0.5 mm – 2.5 mm/ 20 mil – 100 mil Copper
PE-LD, TPO, FPO 0.5 mm – 3.0 mm/ 20 mil – 120 mil Copper
CSPE 0.5 mm – 2.5 mm/ 20 mil – 100 mil Steel
PVC-P 0.5 mm – 3.0 mm/ 20 mil – 120 mil Steel
Do not touch moving parts
There is a risk of inadvertently becoming caught and being pulled in. Do not wear loose articles of
clothing such as scarves or shawls. Tie up long hair or protect it by wearing headgear.
The device may only be operated under supervision as waste heat can reach flammable materials.
The device should also only be operated by trained specialists or under their supervision. Children are
not permitted to operate the device.
When welding, be aware of device hazards in the surrounding area, e.g., risk of tripping, risk of slip-
ping, strong sunlight, unattended equipment, etc.
1.3. Non-intended use
Additional materials upon request.
Material-specific properties can influence the welding capability.
Material types and thicknesses
1.2. Intended use
Any other use or any use beyond the type of use described is deemed non-intended use. In particular, the welding
of unintended materials.
The COMET 700/500 is intended for overlap welding of thermoplastic films and sealing sheets.
Only use original Leister spare parts and accessories; otherwise, any warranty and/or guarantee claims will be
invalidated.
Welding geometry
• The maximum overlap width of the lower and upper membranes is 125 mm.
• Welding seam widths 45 mm or 50 mm (depending on design).
• Welding seam with/without test channel (depending on version).
6
COMET 700
230 V
COMET 700
120 B
COMET 500
230 V
Voltage * V~ 230 120 230
Power W 2300 1700 2300
Frequency Hz 50/60
Temperature °C
°F
80 – 460
176 – 860
Drive m/min
ft/min
0.8 – 8.0
2.6 – 26.2
Max. joining force N
lbf
1000
225
Noise level LA LpA (dB)
LWA (dB)
60.4 (K = 3 dB)
68.4 (K = 3 dB)
Sound power level
Vibration level ah(m/s2)< 2.5 (K = 1.5 m/s2)
Weight
(without power cord)
kg
lbs
9.4
20.7
9.4
20.7
9.2
20.3
ab
cDimensions
a) mm
inches
375 (field kit) or 325 (indoor kit)
14.7 (field kit) or 12.7 (indoor kit)
b) mm
inches
285 (field kit) or 245 (indoor kit)
11.1 (field kit) or 9.6 (indoor kit)
c) mm
inches
285 (field kit) or 260 (indoor kit)
11.1 (field kit) or 10.2 (indoor kit)
2. Technical data COMET 700/500
* Connection voltage cannot be changed
We reserve the right to make technical changes.
7
42
15
To lift the hot wedge welding machine manually, use
the handles (2) and the clamping lever (4).
Use the storage box supplied and the handle attached to the storage box to transport the hot wedge welding
machine.
The hot wedge (15) must have cooled down to at least 60°C/140°F before transport.
Never store flammable materials (e.g. plastic, wood) in the storage box!
Never use the handles (2) and the clamping lever (4) on the device or the handles on the storage
box for transport with the crane.
Comply with applicable national regulations regarding the carrying or lifting of loads.
The total weight of your COMET 700/500 including transport box is up to 14.5 kg (depending on the
version).
3. Transport COMET 700/500
8
4.3. Optional accessories
4.2. Scope of delivery
4.1. Type plate and identification
4. Your COMET 700/500
You can find more information on optional accessories at www.leister.com
Standard equipment in the storage box:
• 1x COMET 700/500 hot wedge welding machine (according to your specification)
• 1x Quick Guide (glued into case)
• 1x Safety instructions
• 1x Brass brush
• 1x Test Certificate (COMET 700 only)
The model and serial number are indicated on your device's name plate (18).
Please transfer this information to your instruction manual. In the event of any inquiries to our representatives or
authorized Leister Service Centers, please always refer to this information.
Model:..............................................................................................................................................................
Serial no.:.........................................................................................................................................................
Example of a name plate for COMET 700 and COMET 500
9
431
16
5
6
7
8
9
15
10
3a
3b
2
17186b6a
11
12
1314
4.4. Overview of device parts
11. drive/pressure roller bottom
12. roller rear
13. contacting system bottom
14. contacting system top
15. hot wedge
16. rollers front (according to your device specification)
17. main switch
18. name plate (with model number and serial number)
1. Power cord
2. for handles
3. on control panel
(3a COMET 700, 3b COMET 500)
4. clamping lever
5. for locking clamping lever
6. for joining force module
(6a COMET 700, 6b COMET 500)
7. clamping arm
8. for swing head
9. for drive/pressure roller, top
10. Towing tongue (according to your device specification)
10
4
Condition of device prior to
power supply interruption
Duration power
outage Condition of device after power supply interruption
COMET 700 COMET 500
The drive and heating are
switched on
≤ 5 sec
If the BASIC recipe is load-
ed: The device continues
to run without a restart
safeguard with the same
settings as before the
outage.
If another recipe is loaded:
The device continues to run
without protection against
restarting with the settings
stored in the recipe.
The device continues to run
without a restart safeguard
with the same settings as
before the outage.
> 5 sec The device restarts. The start display appears on the
display.
Drive and/or heating are
switched o > 0 sec The device restarts. The start display appears on the
display.
The local supply voltage must match the nominal voltage specified on the device. If the line voltage
fails, switch o the main switch and place the welding machine in the park position. EN 61000-3-11;
Zmax = 0.324Ω + j 0.202Ω. Consult electricity supply company if necessary.
The clamping lever (4) must be open during work interruptions and for cooling. The device must be stored in
accordance with the figure below and secured against rolling away independently.
4.6. Power supply interruption
4.5. Park position
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Leister Schweißsystem Handbücher
Leister
Leister WELDPLAST S4 Bedienungsanleitung
Leister
Leister UNIPLAN S Bedienungsanleitung
Leister
Leister Varimat V Bedienungsanleitung
Leister
Leister Uniroof E Bedienungsanleitung
Leister
Leister Twinny T Bedienungsanleitung
Leister
Leister VARIMAT V2 Series Bedienungsanleitung
Leister
Leister WELDPLAST S6 Bedienungsanleitung
Leister
Leister ALLIED VARIMAT V2 Bedienungsanleitung
Leister
Leister EXAMO 100 Bedienungsanleitung
Leister
Leister SEAMTEK 900 AT Bedienungsanleitung
Leister
Leister UNIPLAN 300 Bedienungsanleitung
Leister
Leister VARIANT T1 Bedienungsanleitung
Leister
Leister Uniplan E Bedienungsanleitung
Leister
Leister TAPEMAT Bedienungsanleitung
Leister
Leister UNIFLOOR 500 Bedienungsanleitung
Leister
Leister WELDMAX Bedienungsanleitung
Leister
Leister NOVOLAS Basic AT Benutzerhandbuch
Leister
Leister Uniplan E Bedienungsanleitung
Leister
Leister Astro Bedienungsanleitung
Leister
Leister FUSION 3 Bedienungsanleitung
Beliebte Schweißsystem Handbücher anderer Marken
TAFA
TAFA 30*8B35 Bedienungsanleitung
Lincoln Electric
Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung
ESAB
ESAB Buddy Arc 145 Bedienungsanleitung
CIGWELD
CIGWELD 636804 Kurzanleitung
Red-D-Arc
Red-D-Arc DC-400 Bedienungsanleitung
Hobart Welding Products
Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung
