Lenoxx ES70BL Bedienungsanleitung
Model no: ES70BL / ES71R
Batch no: PR3853
PLEASE READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
The illustrations used in this manual are to illustrate the operation method and product structure of the
product. Where there is a small difference between the physical item and the illustrations, please take
the physical as the standard.
SAFETY AND WARNINGS:
Riding an electric scooter can be a dangerous activity. Certain conditions may cause
components to fail without fault of the manufacturer. Scooter can and is intended to
move and it is therefore possible to lose control, fall off and/or get into dangerous
situations that no amount of care, instruction or expertise can eliminate. If such a thing
does occur you can become seriously injured or die, even when using safety equipment
and other safety precautions. RIDE AT YOUR OWN RISK AND ALWAYS USE COMMON
SENSE.
This manual contains many warnings and cautions concerning the consequences of failing to
inspect, maintain or properly use your electric scooter. Since any incident can result in serious
injury or even death, we do not repeat the warning of possible serious injury or death each time
such a possibility is mentioned in this manual.
APPROPRIATE RIDING ATTIRE
Always wear proper protective equipment such as:
•
Approved safety helmet. (Helmet may be legally required by local law or regulation in your
area.)
•
Elbow pads and knees pads
•
Long sleeved shirt, long pants
•
Gloves
•
Lace up shoes with rubber soles, never ride barefooted or in sandals, and ensure that
shoelaces are tied and kept out of the way of the wheels and drive system.
RIDER USE AND PARENTAL SUPERVISION
RIDER MUST NOT EXCEED THE WEIGHT LIMIT OF 70 KG (154 pounds). Rider weight does not
always mean a person's size is appropriate to fit or maintain control of the scooter.
This manual contains extremely important safety information. It is your responsibility to
completely review this information and make sure that all riders understand all warnings,
cautions, instructions and safety topics and assure that all riders are able to safely and
responsibly use this scooter. We advise that you periodically review and reinforce all
information in this manual with all riders and that you inspect and maintain your scooter to
ensure their safety.
The recommended rider age is 10 and older. Any rider that is unable to fit comfortably on the
scooter should never attempt to ride it. A parent's decision to allow their child to use scooter
should be based on the child's maturity, skill and their ability to follow rules.
Do not touch the motor or brakes on the scooter when in use or directly after use as these parts
can become extremely hot.
Keep this scooter away from small children and remember that it is intended for use only by
persons who are, at a minimum, completely competent and comfortable while operating this
product.
RIDING PRACTICES AND CONDITIONS
Check and obey any local laws or regulations which may affect the locations where the electric
scooter may be used.
Always ride defensively. Watch out for obstacles that could catch your wheel or force you to
tum suddenly or lose control. Be careful to avoid pedestrians, other wheeled products (such as
skaters, skateboards, scooters, bikes, etc.), children or animals who may enter your path.
Always respect the rights and property of others.
Do not activate the speed control on the hand grip unless you are on the scooter and in a safe,
outdoor environment that is suitable for riding.
Do not attempt or perform stunts or tricks on this electric scooter. This product is not made to
withstand abuse from jumping, curb grinding or any other type of misuse or stunts.
Maintain a hold with both hands on the handlebars at all times.
Never allow more than one person at a time to ride the scooter. Never use near steps, water, or
swimming pools.
Never ride while using a mobile phone or while wearing headphones.
Keep your fingers and other body parts away from the belt, motor, steering system, wheels and all other
moving components. Never ride while using a cell phone or wearing headphones.
Never hitch on to or with another vehicle or pull anyone or anything.
Never immerse the scooter in water; electrical and drive components could be damaged by water or
create other possible unsafe conditions.
Ride only on flat, dry surfaces such as pavement or level ground without loose debris, such as sand,
leaves, rocks or gravel. Water, mud, ice, bumpy, uneven, slick, or rough surfaces could impair traction and
contribute to possible loss of control. Avoid excessive speeds that can occur from downhill rides which
could cause loss of control.
Do not ride at night or in areas of limited visibility.
Do not ride in wet weather.
NEVER use on public roads, hills, sloped driveways or near motor vehicles or swimming pools.
Do not ride indoors or on surfaces that could become damaged such as carpet or flooring.
Before each ride the following checks will need to be performed to the scooter:
•
Ensure that the brake system is functioning properly.
•
That all components are properly secured and are functioning according to manufactures specifications.
Components shall be maintained and repaired in accordance with the manufacturers authorized
replacement parts with installation performed by a qualified repair agent.
USING THE CHARGER
The charger should be regularly examined for damage to the cord, plug, enclosure and other parts. In the
event of such damage, if any is found, the scooter should not be charged until the charger has been
repaired or replaced.
Use only with the supplied recommended charger. Always use caution when charging.
The charger is not a toy and should be operated by an adult. Never operate charger near flammable
materials or liquids. Disconnect the charger and unplug from scooter when not in use. Do not exceed
recommended charging time.
Always disconnect the charger from the scooter prior to wiping down and cleaning with any liquid.
FAILURE TO HEED TO THE WARNINGS LISTED ABOVE INCREASES RISK OF POTENTIAL SERIOUS INJURY.
USE THE APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR PROTECTIVE GEAR.
BEFORE YOU START:
WARNING: Remove all packing and items from the display box. Make sure that the power switch is
turned "OFF" before assembling the scooter.
Estimated Assembly Time:
•
Allow up to 25 minutes for assembly, not including initial charge time.
•
Allow up to 8 hours for the initial charge.
REQUIRED TOOLS:
ASSEMBLY:
Handlebar Steer Tube Assembly
Tools required: 5 mm hex wrench, 10 mm wrench
1.
Depress the push button located on the rear of the fork and insert the handlebar steer tube
onto the fork. The push button should align with the locator hole in the handlebar steer
tube and lock the steer tube securely in place.
2.
Tighten the bolts with the 5mm hex wrench and 10 mm wrench. Tighten bolts evenly and
securely.
3.
Align handlebars both vertically and horizontally (a) onto handlebar steer tube
clamp (b) install handlebar clamp and hardware (c&d) and tighten evenly and
securely with the 5mm hex wrench and 10mm wrench.
Charging the battery
WARNING: Batteries must be fully charged before you ride your electric scooter.
Required components: Charger
• Initial battery charge time- 8 hours
• Recharges after initial charge- Up to 6 hours
• When scooter is not in regular use batteries need to be charged on a monthly basis
to maximize performance
1.
Make sure power switch is in the OFF position before plugging in the charger. Insert charger
into charging port on the right side of the battery box.
2. Plug the charger into a wall power outlet. The light on the charger housing should illuminate. Red
LED light indicates battery is charging and a green LED light indicates battery is fully charged.
WARNING: Do not use this product for the first time until you have charged the battery for at least 8
Hours. Failure to follow these instructions may damage your product and void your warranty.
Note: The charger has a small window with two LED lights that indicates the charge status. Refer to
the illustration on the charger unit for the actual "charging" and "charged" status indication. Your
charger may get warm during use; this is normal and is no cause for concern.
Note: Batteries must be recharged at least once a month even when the scooter is not in use. Failure
to do so may result in batteries that will no longer accept a charge.
HARDWARE MAINTENANCE:
Brake
Check the brakes for proper function. When you squeeze the lever, the brake should provide
positive braking action. When you apply the brake with the speed control on, the brake cut
off switch should stop the motor. Make sure that the brakes are not rubbing.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames are rare, it is possible for
aggressive rider to run into a curb or wall and bend or break a frame. Get in the habit of
inspecting your scooter on a regular basis.
Tires
Periodically inspect the wheels for excess wear.
Safety Gear
Always wear proper protective gear such as an approved safety helmet. Elbow pads and
knee pads are recommended. Always wear athletic shoes (lace up shoes with rubber soles),
never ride barefooted or in sandals, and keep shoelaces tied and out of the way of the
wheels, motor and drive system.
Battery
Make sure the power switch is turned off whenever the scooter is not in use. Never store
the product in freezing or below freezing temperatures! Freezing will permanently damage
the battery.
BEFORE YOU RIDE:
Before you ride, always check for the following:
Safety Gear
Always wear proper protective gear such as:
•
Approved safety helmet. (Helmet may be legally required by local law or regulation in
your area.)
•
Elbow pads and knees pads
•
Long sleeved shirt, long pants
•
Gloves
•
Lace up shoes with rubber soles.
Brake
Check the brakes for proper function. When lever is squeezed it should slow/stop the rear
wheel without excessive effort. When you apply the brake with the throttle on, the brake
cut off switch should stop the motor. Make sure that the brakes are not rubbing when the
lever is not being squeezed. Do not ride the scooter if the brakes are not functioning
properly.
Throttle
Once the power switch is place in the "ON" position the scooter will move when the throttle
is twisted. Make sure that before throttle is
twisted that you are in an open and safe area to ride, you are balanced on the scooter and
have both hands on the handlebar controls.
Tires
Inspect the wheels for excess wear and replace if necessary.
Frame, Fork and Components
Always carefully inspect your scooter before you ride. Check for cracks, broken worn or
loose components which should be repaired or replaced before you ride.
Battery
Always make sure the power switch is in the "off" position whenever the scooter is not in
use. Never store the product in freezing or below freezing temperatures. These low
temperatures will permanently damage the battery.
WARNING:
Always ensure that you are in a safe open area to ride before you engage the
throttle. Never twist the throttle without being on the scooter in a balanced, ready to ride
position with both hands on the handlebar controls.
Failure to follow these instructions may damage your scooter and void your warranty.
REPAIR AND MAINTENANCE:
WARNING:
Turn the power switch "OFF" before conducting any maintenance procedures.
Adjusting the Brakes
Tools required: 10mm wrench
1.
To adjust the brake cable thread clockwise (loosen) or counterclockwise (tighten) the
adjuster barrel on the brake lever. Only tum the barrel in small increments until the
desired adjustment is reached. If brake continues to need further adjustment proceed to
the next step.
2.
If the brake cable is still either too tight or too loose use a 10mm wrench to loosen the
brake cable pinch bolt for further adjustment on the cable. Ensure that the 10mm nut is
securely tightened after the adjustment is made.
WARNING:
The brake could be capable of locking up and skidding the rear wheel if not
applied correctly. Always try and avoid skidding as this could cause you to lose control of the
scooter and will cause damage to the rear tire. Practice using the brake in an unobstructed
open area to become familiar with its function and can make smooth controlled stops.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Lenoxx Roller Handbücher
Beliebte Roller Handbücher anderer Marken
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
Carrera
Carrera impel Bedienungsanleitung
Afikim
Afikim Superlight SL-3 Bedienungsanleitung
CareCo
CareCo ZOOM Bedienungsanleitung
Douglas
Douglas Vespa G.S. Bedienungsanleitung
Gazelle
Gazelle with BOSCH System Bedienungsanleitung