Leviton 6PSMT-C02 Bedienungsanleitung

Mini MeterTM in Surface Mount Enclosure

with Wireless AMR Option

Installation Manual

Cat No. MMSMT, 6PSMT

DI-000-MMSMT-00B

WEB VERSION

TABLE OF CONTENTS

1 Warnings and Cautions

2 Product Description

2.1 General Description

2.2 Meter Features

2.3 Meter Certiﬁcations

2.4 Model Numbers

2.5 Physical Description

2.5.1 Mini Meter in Surface Mount Enclosure

2.5.2 Tamper Protection

2.6 Functional Description

3 Technical Speciﬁcations

3.1 Electrical Speciﬁcations

3.2 Input/Output Connections

4 Installation Instructions

4.1 Preparation

4.2 List of Materials

4.3 Setting up the Enclosure

4.3.1 Mounting Location

4.3.2 Making Conduit Openings

4.4 Installation of Voltage Lines

4.5 Installation of Current Transformers

4.5.1 General Requirements

4.5.2 Installing Solid Core CTS

4.6 Surface Mount Enclosure Installation

4.7 Testing the Installation

5 Wireless Automatic Meter Reading

5.1 MDT Transceiver Wiring

5.2 Network Activation

6 Maintenance

7 Troubleshooting

8 Warranty

9 Contact Information

WEB VERSION

1 WARNINGS AND CAUTIONS

The following section contains installation and wiring instructions for the Leviton Mini Meter

in indoor Surface Mount enclosure. If technical assistance is required at any point during

the installation, contact information can be found at the end of this manual. Leviton is not

responsible for damage to the meter caused by incorrect wiring, which will void the product’s

warranty.

WARNING:

• TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER at circuit breaker or fuse

and test that the power is off before installing product or servicing current transformers.

• TO AVOID FIRE, SHOCK OR DEATH; Look inside the meter and electrical panel for

possible exposed wire, broken wire, damaged components or loose connections.

• Make sure all tools used during installation have proper installation ratings.

• Installations should be done in accordance with local codes and current National

Electric Code requirements, and performed by trained, qualiﬁed professionals.

• Equipment used in a manner not speciﬁed by this document impairs the protection

provided by the equipment.

CAUTIONS:

• Verify the model number and electrical speciﬁcations of the device being installed to

conﬁrm they are appropriate for the intended electrical service

(see Section 3).

• Consult local codes for any possible permits or inspections required before beginning

electrical work.

• Like repeaters, MDTs should not be mounted inside a metal box or near a metal wall

(i.e. heating furnace or electrical panel). Consult the Tehama QuickStart Guide, which

can be downloaded from the manufacturers website.

• MDTs must be mounted using velcro, tie-wraps, or screws. Don’t let the MDT

dangle by the pulse input wire.

• Avoid locations with dampness, high humidity, or an abundance of mold.

• Ensure the conduit for the installation is ﬂexible and non-metallic. For outdoor

applications conduit and conduit ﬁttings must be rated UL Type 4X for outdoor

enclosures. Failure to use the appropriate conduit impairs the degree of equipment

protection.

WEB VERSION

2 PRODUCT DESCRIPTION

2.1 General Description

The Leviton Mini Meter is a self-powered, current transformer (CT) rated

electronic kilowatt-hour (kWh) meter designed for permanent connection to an

electrical service. This guide is for use with the dual element

(1PH 120/240V or 2PH 120/208V, 3-Wire) Mini Meter in a surface mount enclosure.

2.2 Meter Features

• Exceeds Revenue-grade accuracy

• Built in LCD display

• Multiple load monitoring with a single meter

• Isolated Pulse outputs

• Tamper Micro Switch

• Optional wireless AMR enabled

• 5-year warranty

2.3 Meter Certiﬁcations

• UL Approved (100A & 200A models only) for use in the US or Canada

• Conforms to accuracy requirements set forth in ANSI C12.1 and C12.16

• Certiﬁed to California Division of Measurement Standards

• Approved by the California Energy Commission for use in the California Solar

Initiative’s Performance Based Incentive Program

• Approved by State of Maryland Public Service Commission in accordance with

applicable ANSI C12.1 requirements

2.4 Model Numbers

6PSMT-C02 Surface Mount Mini MeterTM Kit, LCD Display, Isolated Pulse Outputs

MMSMT-C02 Surface Mount Mini MeterTM Kit, LCD Display, Isolated Pulse Outputs,

TOU enabled kWh Meter Data Transceiver

MMSMT-D02 Surface Mount Mini MeterTM Kit, LCD Display, Isolated Pulse Outputs,

TOU and Temperature enabled kWh Meter Data Transceiver

MMSMT-E02 Surface Mount Mini MeterTM Kit, LCD Display, Isolated Pulse Outputs,

TOU and 1% Delta Temperature enabled kWh Meter Data Transceiver

Table 1 - Mini Meter Kit Models & Options

WEB VERSION

2 PRODUCT DESCRIPTION

2.5 Physical Description

2.5.1 Mini Meter in Surface Mount Enclosure

2.5.2 Tamper Protection

Two ﬂat-head screws that secure the enclosure front may be covered with

adhesive-type security seals that indicate tampering when removed. Also, some

models provide a tamper indication through the wireless AMR system when

enclosure cover is removed.

2.6 Functional Description

The 6PSMT and MMSMT versions of the Mini Meter accurately quantiﬁes electrical

energy usage of 1PH 3W (2-pole) 120/208V or 120/240V loads. Solid Core Current

Transformers are used to measure current ﬂowing to a load. Energy information

(pulses) is recorded by the onboard wireless transceiver, which time stamps kWh

readings in 15-minute intervals and sends it over a secure wireless network to a Data

Concentrating Access Point (DCAP), where data from a network of meters is stored

for on a local computer for billing or energy management functions, or data can be

pushed from the DCAP or pulled from remote locations via an ethernet connection.

Figure 1 - Mini Meter Surface mount enclosure dimensions

4.620 in.

2.845 in.2.150 in.

3.525 in.

5.130 in.

1.107 in. 1.282 in.

.125 in.

5.576 in.

8.713 in. 8.398 in.

1.315 in.

1.690 in.

5.316 in.

WEB VERSION

3 TECHNICAL SPECIFICATIONS

Table 2 - Electrical and Environmental Speciﬁcations

1Product approved for use with included Leviton Current Transformers, as follows:

• 200A:

Part Numbers CDA02-K12 (Black) and CDA02-R12 (Red)

2Pollution Degree 2: normally only non-conductive pollution occurs. Occasionally, however, a

temporary conductivity caused by condensation can happen.

3.1 Electrical and Environmental Speciﬁcations

The Mini Meter device falls under UL Circuit Category III: devices for measurements

performed in the building installation. The electrical and environmental speciﬁcations

for Mini Meter devices are given in the table below.

Input Conﬁgurations 1 Phase, 2 wire

1 or 2 Phase, 3 wire

Supply Voltage Range

(L1 or L2 to Neutral)

Min. 102 VAC Max. 138 VAC

Maximum Input Power 8 VA

Maximum Rated Current1220 A primary for 200 A models

110 A primary for 100 A models

0.11 A secondary for 0.1 A secondary models

0.22 A secondary for 0.2 A secondary models

Line Frequency 50-60 Hz

Power Factor Range 0.5 to 1.0, leading or lagging

Accuracy +/- 0.5% of registration @ 1.0pf. 2 to 200 A

+/- 0.75% of registration @ 0.5pf, 2 to 200 A

Operating Temperature Range -30 to +70 degrees C

Rated Pollution Degree22

Rated Relative Humidity 80%

Branch Fuse Holder

Klemsan ASK2 or equiv.

250 V, 1 A, fast acting, short time lag

Terminal Blocks Mini Meter

Dinkle/International Connector

OSTVI110152

4.4 in-lb of torque maximum

WEB VERSION

3 TECHNICAL SPECIFICATIONS

3.2 Input/Output Connections and User Display

Figure 2 - Mini Meter Connections and Display

Table 2A - Input Connections

Load LED

Tamper Micro

Switch

X1 X2

CT1 CT2 (Kh) Isol

Isolated Output

X1 X2 10 100 1000

Counter

+12VDC

12COM

L2N

MDT

LCD Display

Wireless Data

Transceiver

Voltage Inputs (wire connections) Description

L1 Black wire, voltage input, Line 1,

120 V with respect to neutral

N White wire, Neutral input

L2 Red wire, voltage input, Line 2, 120 V with

respect to neutral (2 phase models only)

CT Inputs

CT1 : X1 Current Transformer input, CT1.

Colored wire of CT 1

CT1 : X2 Current Transformer input, CT1. White wire

of CT1

CT2 : X1 Current Transformer input, CT2.

Colored wire of CT 2.

(2 phase models only)

CT2 : X2 Current Transformer input, CT2. White wire

of CT2 (2 phase models only)

WEB VERSION

LED Indicators Description

Load LED (green) 50% duty cycle LED to verify proper

meter function when connected to a

load. At 200 watts, LED will ﬂash 1.5

minutes on, 1.5 minutes off; with no

load, LED will remain on or off

LCD Display LCD display shows total kWh,

kWh demand, instantaneous kWh,

reverse phase indication, and serial

number upon boot.

3 TECHNICAL SPECIFICATIONS

Table 3 - Display Indicators

Table 2B - I/O Connections

3.2 Input/Output Connections and User Display

Outputs Description

10, Isolated Output (10 Wh/P, Kh = 10) Isolated pulse output: 5 watthours

on, 5 watthours off, referenced to

ISOL COM NOT TO BE USED FOR

FIELD WIRING

100, Isolated Output (100 Wh/P, Kh=100) Isolated pulse output: 50 watthours

on, 50 watthours off, referenced to

ISOL COM

1000, Isolated Output (1 kWh/P, Kh=1000) Isolated pulse output: 500 watthours

on, 500 watthours off, referenced to

ISOL COM

ISOL COM Isolated common for 10/100/1000

isolated outputs

Counter (kh = 100 or kh = 1000)* For 12 VDC electro-mechanical

counter

+12 VDC +12V DC @ 10ma Max output

(MMS and MMD models only) (Not Isolated for pre-wiring only)

* Recommended Leviton Mechanical Counters part numbers are:

MPCTR-1KW (1kWh) and MPCTR-TKW (0.1kWh).

WEB VERSION

4 INSTALLATION INSTRUCTIONS

4.1 Preparation

WARNINGS

•TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER at circuit breaker

or fuse and test that power is off before installing product or servicing current

transformers.

• TO AVOID FIRE, SHOCK OR DEATH; Look inside the meter and electrical

panel for possible exposed wire, broken wire, damaged components or loose

connections.

CAUTIONS

•Ensure the conduit for the installation is ﬂexible and non-metallic. For outdoor

applications conduit and conduit ﬁttings must be rated UL Type 4X for outdoor

enclosures. Failure to use the appropriate conduit impairs the degree of

equipment protection.

•Speciﬁcation for branch circuit protection, rated min. 250 V, 1A, for voltage

sense / input leads.

4.2 List of Materials

•Mini Meter, Surface Mount enclosure and associated mounting materials, four

#6 x 15/8 drywall screws.

•Additional wiring for CT or voltage leads extension if needed. Wires must be 18

AWG or thicker and insulated for 300 VAC min.

•Current Transformers (CTs): This product is designed for use with Leviton CTs

• Flexible, non-metallic conduit and ﬁttings; UL Type 4X for outdoor applications.

4.3 Setting up the Enclosure

4.3.1 Mounting Location

•Mini Meter surface mount enclosures require a switch or circuit breaker as part

of the building installation.

•The switch or circuit breaker must be marked as the disconnecting device for

the Mini Meter.

•It is recommended that the enclosure be mounted near the disconnecting

device in an area with adequate ventilation.

•Ensure that the CT and voltage lead lengths (and conduit lengths) are capable

of reaching the enclosure from the load center.

•If a suitable mounting location near the load center cannot be found, additional

in-line fuses or circuit breaker may be required in accordance with NEC

regulations.

WEB VERSION

Andere Handbücher für 6PSMT-C02

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Leviton Messgerät Handbücher

Leviton

Leviton 4000-K Series Bedienungsanleitung

Leviton

Leviton VerifEye 71D48 Bedienungsanleitung

Leviton

Leviton VerifEye Series 4100 Bedienungsanleitung

Leviton

Leviton VerifEye Bedienungsanleitung

Leviton

Leviton VerifEye Series 4100 Bedienungs- und Wartungsanleitung

Leviton

Leviton 3300 series Bedienungsanleitung

Leviton

Leviton VerifEye S8112 Bedienungsanleitung

Leviton

Leviton Verifeye 8000 Series Bedienungsanleitung

Leviton

Leviton Verifeye 8000 Series Bedienungsanleitung

Leviton

Leviton 4000-R series Bedienungsanleitung

Leviton

Leviton PK-A3218-10-00-0D Bedienungsanleitung

Leviton

Leviton mini meter MMU Bedienungsanleitung

Leviton

Leviton VerifEye 3300 Series Bedienungsanleitung

Leviton

Leviton 3300 series Bedienungsanleitung

Leviton

Leviton 4OUMR-R12 Bedienungsanleitung

Leviton

Leviton VerifEye 7000 Series Bedienungsanleitung

Leviton

Leviton Verifeye 8000 Series Bedienungsanleitung

Leviton

Leviton VerifEye 71D12 Bedienungsanleitung

Leviton

Leviton 70D03 Bedienungsanleitung

Leviton

Leviton VerifEye MDTFW Bedienungsanleitung

Leviton

Leviton VerifEye 72D48 Bedienungsanleitung

Leviton

Leviton Series 2000 Bedienungsanleitung

Leviton

Leviton 4000 Series Bedienungsanleitung

Leviton

Leviton 4000-R series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung