LG V-C4380STS Bedienungsanleitung

VACUUM CLEANER

SERVICE MANUAL

MODEL : V-C4380STS

VC4380T

V-C4380STR

CAUTION

BEFORE SERVICING THE UNIT, READ THE

"SAFETY PRECAUTIONS" IN THIS MANUAL.

Website http://biz.lgservice.com

삼흥

정판

P/NO : 3828Fi5877A

June, 2008

Printed in Korea

-2-

CONTENTS

SAFETY PRECAUTIONS.............................................................................................................................3

CAUTIONS ...................................................................................................................................................3

DESCRIPTION..............................................................................................................................................4

SPECIFICATIONS ........................................................................................................................................4

DISASSEMBLY ........................................................................................................................................5~6

TROUBLE SHOOTING GUIDE................................................................................................................7~9

SCHEMATIC DIAGRAM.............................................................................................................................10

PRINTED CIRCUIT BOARD ......................................................................................................................10

EXPLODED VIEW ................................................................................................................................11~13

REPLACEMENT PARTS LIST............................................................................................................14 ~19

-3-

SAFETY PRECAUTIONS

BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY,

AND OBSERVE EACH POINT CAREFULLY.

1. Filter

1) The filter is composed of a motor safety filter, a

exhaust filter and a paper bag or a cloth bag.

2) Never use the vacuum cleaner without filters. It

may harm the motor.

3) When the cloth bag, the motor safety filter and

the exhaust filter are soiled, wash the filter with

neutral cleanser.

NOTE : Re-use of the cloth bag, motor safety filter.

Never wash the filter in a washing machine or in

a dishwasher.

Never use hot water for washing the filter.

Re-use the filter after drying it completely in the

shade.

Do not dry near fire or direct sun ray.

2. Dust indicator

When the dust bag is full of dust, the indicator turns

to red (Suction power will be reduced). Then,

change the paper bag with the new one or clean the

cloth bag.

4. Avoid sucking such materials as :

1) Liquid or wet dust :

Clogs the ventilation holes, reduces the suction

power significantly and harms the motor.

2) Inflammable liquids such as benzene, alcohol or

solvents.

3) Burning objects such as cigarette butts.

4) Bulky objects such as vinyl, paper etc.

5) Sharp objects such as needles, pins, metal or

glass particles etc.

5. Attachments

1) Nozzle : for cleaning wooden floor, the room floor

and carpet.

2) Dusting Brush and Crevice Tool :

For cleaning any crevice, inside corners of

window frames.

For delicate vacuuming of fabrics on the

furniture, curtains, etc.

3) Upholstery Nozzle : for vacuuming the dust on

the upholstery.

6. Close supervision is necessary when this

vacuum cleaner is used by or near children.

Children's carelessness may cause damage to

the cleaner or injure persons.

7. Air exhausted from the vacuum cleaner is

normally warm. But if extraordinarily hot air is

exhausted, check if the telescopic tube, hose or

dust bag is clogged or not.

8. Electric shock could occur if used outdoors or

on wet surfaces.

CAUTIONS

BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT

THE ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.

1. Motor exchange

1) Separate the Body Cover and Body Base by

unfastening the screws.

2) After disconnecting the lead wires, replace the

old motor with a new one.

2. In case of exchanging other parts. refer to the

exploded view.

-4-

DESCRIPTION

CANISTER

Brush Assembly,Dust Nozzle Assembly,Upholstery Filter Assembly,Paper

ATTACHMENTS

Dust Indicator

Cord Reel

Button

Filter cover

Wheel

Switch Button

(ON/OFF)

Power Cord

Nozzle Assembly,Floor

Pipe Assembly,

Telescopic

Flexible Hose ASS'Y

SPECIFICATIONS

1. MODEL : REFER TO THE COVER PAGE

2. POWER SOURCE : ON RATING PLATE

3. POWER CONSUMPTION : ON RATING PLATE

4. POWER CONTROL : SLIDE CONTROL ON HANDLE

5. CAPACITY : 6.2ℓ

6. CORD LENGTH : 6 m

7. NET WEIGHT : 5.8 kg

8. PACKING WEIGHT : 9 kg

9. NET DIMENSION : 305×522×230 (W×D×H)mm

10. PACKING DIMENSION

:358×577×370(W×D×H)mm

11. ATTACHMENTS

HOSE ASSEMBLY,FLEXIBLE ......................................... 1EA

PIPE ASSEMBLY,TELESCOPIC .................................... 1EA

NOZZLE ASSEMBLY,FLOOR ......................................... 1EA

BRUSH ASSEMBLY,DUST ............................................. 1EA

NOZZLE ASSEMBLY,UPHOLSTERY ............................ 1EA

FILTER ASSEMBLY,PAPER............................................ 1EA

• This specifications are subject to change according to the

buyer's request.

-5-

DISASSEMBLY

• Almost all the parts of this vacuum cleaner can be

assembled with a screw driver and each connecting

component easily fits each other.

Disassemble one by one referring to the exploded

view.

• If possible, don’t disassemble except for the

necessary parts. It is not necessary to disassemble

the parts that are not detailed in the exploded view.

1. Body Cover Assembly Replacement

1) Grasp carrying handle and open filter cover by

lifting latch.

2) Open the filter cover and remove the two screws

fastening the body base in the direction of arrow.

3) Lift body cover in the direction of the arrow.

4) Strip off the lead wires from the push switch and

others.

2. Filter cover assembly replacement

1) Push the hinge side by inserting flat screw driver

in crack between hinge and body cover.

NOTE : Before attempting to service or adjust any part of the vacuum cleaner,disconnect the electrical power

supply cord from the wall outlet.

-6-

3. Push Switch Assembly Replacement

1) Push the s/w button hook in the direction of the

arrow.

2) Push the push switch down grasping the wings of

push switch by long nose.

4. PWB Assembly Replacement.

1) Remove the two screws fastening the P.W.B

Assembly on the body cover.

5. Motor Assembly Replacement

1) Lift the motor assembly in direction of the arrow after

stripping off the lead wires.

6. Cord Reel Assembly Replacement

1) Lift the cord reel assembly from the body base in

direction of the arrow.

-7-

TROUBLE SHOOTING GUIDE

1. SWITCH ON BUT MOTOR DOSE NOT TURN.

2. SWITCH ON, MOTOR DOES NOT TURN BUT BUZZES

CHECKING CAUSE SOLUTION

Check the power

source

Abnormal

Normal

Poor plug insertion Insert again

The fuse is melt down in the

coverknife switch Exchange the fuse

Power cord cut Repair or exchange

Interior lead wire cut Exchange the lead wire

Motor armature cut Exchange the motor

Ball bearing defacement Exchange the motor

Impeller hindrance

(Caused by foreign matters)

Remove the foreign

matters

Motor(stator armature) coil

cut or damaged Exchange the motor

Poor contact carbon

brush defaced Exchange or repair

Poor switch contact point Exchange the switch

-8-

3. SWITCH OFF BUT MOTOR TURNS

4. WEAK SUCTION POWER

Poor connection Repair

Poor switch Exchange the switch

Carbon brush defaced Exchange the motor

Motor armature cut

Low rotation speed

Exchange the motor

Foreign matters attached to

the impeller

Remove the foreign

matters

Low voltage Inquire to the Power utility

company

Hose and extension wands

are clogged with foreign

matters

Remove the foreign

matters in the hose or

extension wands

Filter bag or cloth bag is filled

with inhaled foreign matters

Motor turns normally,

but suction power is weak

Remove the foreign

matters or exchange the

filter bag or clean the cloth bag

The slide knob on the handle

is opened

Close the slide knob by

sliding it

-9-

5. VIBRATION NOISES

6. RADIO, TV RECEPTION DISTURBANCE

7. IMPROPER TUBE OF NOZZLE CONNECTION

Loose parts Secure firmly

Unbalanced motor assembly Exchange or repair the motor

Foreign matters are attached

to the impeller Remove the foreign matters

Poor cord, lead wire Exchange cord, lead wire

Poor rectification of carbon

brush Exchange the the motor

Bent connection parts Exchange the parts

Poor connection

(Caused by foreign matters)

Remove the foreign matters

and reconnect

Poor electric connector or

receiver

Repair the electric connector or

receiver

Poor capacitor Exchange the capacitor

Poor rectification of carbon

brush Exchange the motor

Armature is cut or foreign

matters attachedattached

Exchange motor

Remove foreign matters

-10-

SCHEMATIC DIAGRAM

PRINTED CIRCUIT BOARD

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Staubsauger Handbücher

LG VK7920 series Bedienungsanleitung

LG V-CD281NT Bedienungsanleitung

LG VC68 NRT Series Bedienungsanleitung

LG VB78 H Series Bedienungsanleitung

LG V-CA701HTQ Bedienungsanleitung

LG VC4916 Series Bedienungsanleitung

LG V-UP881NB Bedienungsanleitung

LG VTCP94 N Series Bedienungsanleitung

LG VC6820NRTB Bedienungsanleitung

LG VK8810 Series Bedienungsanleitung

LG V-CD271NT Series Bedienungsanleitung

LG CordZero A9 S Bedienungsanleitung

LG VP0716WNV Bedienungsanleitung

LG V-C777S Bedienungsanleitung

LG VR94070NCAQ Bedienungsanleitung

LG VK9820NHB Bedienungsanleitung

LG VK71 H Series Bedienungsanleitung

LG VZ94 Series Bedienungsanleitung

LG VC68 R Series Bedienungsanleitung

LG V-KC902H Series Bedienungsanleitung

LG V-CP743NB Bedienungsanleitung

LG V-CR56S Bedienungsanleitung

LG A937KGMS.EIGELGA Bedienungsanleitung

LG VK751 series Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch