Life Span EVEREST Bedienungsanleitung

EVEREST

TREADMILL

OWNER’S

MANUAL

Product may vary slightly from the item pictured due to model upgrades

Read all instructions carefully before using this product. Retain this owner’s manual for future

reference.

NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au

Everest

TABLE OF CONTENTS

1. IMPORTANT SAFETY INSTRUCTIONS 3

2. IMPORTANT ELECTRICAL INFORMATION 5

3. IMPORTANT OPERATING INSTRUCTIONS 5

4. ASSEMBLY INSTRUCTIONS 6

5. OPERATION GUIDE WITH PROGRAM CHART 10

6. EXERCISE GUIDE 21

7. MAINTENANCE INSTRUCTIONS 23

8. EXPLODED DIAGRAM 30

9. PARTS LIST 31

10. WARRANTY 33

Everest

1. IMPORTANT SAFETY INSTRUCTIONS

WARNING - Read all instructions before using this treadmill.

It is important your treadmill receives regular maintenance to prolong its useful life. Failing to

regularly maintain your treadmill may void your warranty.

Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to

cleaning and/or service work.

DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY

USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.

Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.

Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and

treadmill may result.

Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of

the treadmill and any fixed object.

Place your unit on a solid, level surface when in use

When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should

you fall or move too far back on the treadmill.

Keep hands away from all moving parts.

Never operate the treadmill if it has a damaged power cord or plug. When damaged, these must be

replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a

hazard.

Keep the cord away from heated surfaces.

Do not operate where aerosol spray products are being used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

Never drop or insert any object into any openings.

The treadmill is intended for in-home use only and is not suitable for commercial environments.

To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug

from the outlet.

Everest

The pulse sensors are not medical devices. Various factors, including the user’s movement, may

affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in

determining heart rate trends in general.

Use the handrails provided; they are for your safety.

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your

treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

Before undertaking any type of exercise program, it is recommended that you consult a doctor.

Injuries to health may result from incorrect or excessive training.

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

WARNING heat rate monitoring systems may be inaccurate. If you feel faint stop exercising

immediately.

Children should not be allowed on or around the equipment, even when not in use.

Children should be supervised to ensure that they do not play with this machine

Loose-fitting clothing or jewellery that could become an entanglement hazard should not be worn.

Training shoes should be worn when using the equipment.

Equipment must be used on a level and stable surface.

All fixings should be checked before the equipment is used.

All literature relating to the use of the equipment should be retained for future reference.

Recommended operating temperature: 5-40°C

Remove the safety key after use to prevent unauthorized treadmill operation.

Everest

2. IMPORTANT ELECTRICAL INFORMATION

WARNING!

Route the power cord away from any moving part of the treadmill including the elevation mechanism and

transport wheels.

NEVER remove any cover without first disconnecting AC power.

NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors, near a pool,

or in any other high humidity environment.

This is a high-power item; please do not share the same outlet with other high power machines such as, fridges,

air conditioning etc. Please choose an outlet exclusively for the machine and make sure the fuse is 10A.

3. IMPORTANT OPERATING INSTRUCTIONS

Understand that changes in speed and incline do not occur immediately. Set your desired speed on the

computer console and release the adjustment key. The computer will obey the command gradually.

Use caution while participating in other activities while walking on your treadmill, such as watching television,

reading, etc. These distractions may cause you to lose balance or stray from walking in the centre of the

belt; which may result in serious injury.

In order to prevent losing balance and suffering unexpected injury, never mount or dismount the treadmill

while the belt is moving. This unit starts with at a very low speed. Simply standing on the belt during slow

acceleration is proper after you have learned to operate this machine.

Always hold on to handrail while making control changes.

A safety key is provided with this machine. Remove the safety key will stop the walking belt immediately; the

treadmill will shut off automatically. Inserting the safety key will reset the display.

Do not use excessive pressure on console control keys. They are precision set to function properly with little

finger pressure.

Replace any defective components immediately. The machine must be kept out of use until repaired.

Belt wear-in period: all treadmills make a certain type of thumping noise due to the belt riding over the rollers,

especially new treadmills. This noise will diminish over time, although may not completely go away. The belt

will stretch over time, causing it to ride smoother over the rollers.

Everest

4. ASSEMBLY INSTRUCTIONS

FIXING TOOLS:

5# Allen Wrench 5mm, 1pcs

Wrench with screw driver S=13, 14, 15, 1pcs

NO.

DES.

SPECIFICATION

QTY

NO.

DES.

SPECIFICATION

QTY

Main Frame

Safety key

5#Allen Wrench

Bolt

4.2*19

Bolt

M10*15

Left base Cover

Bolt

M8*16

Right base Cover

6#Allen Wrench

Left Upright Tube

Lock washer

Right Upright Tube

Lock washer

Wrench W/Screw

S=13、14、15

104

Oil Bottle

Water Bottle Tube

103

MP3 Wire

Everest

STEP 1:

STEP 2:

STEP 3:

1. Open the carton, remove the parts from

the box and place the Main Frame on

level ground.

2. Go through computer bottom wire (58) to

the right upright.

Do not let the thread drop into the Right

Tube after the line is taken out so as to

connect it to the computer up wire (57).

3. Use the 6# Allen wrench (18), and

attach Bolt M10*15(73) to Lock

Washer (74), to secure the Right

upright (4) and Base Tube (2).

Repeat the same for left side.

Everest

STEP 4:

STEP 5:

STEP 6:

4. Connect the computer up wire (57)

with computer bottom wire (58), and

put them inside the upright tube.

Install the Computer Bracket (6) to the

Left/Right Upright.

Use the 5# Allen wrench (17) to lock

bolt (83) and Lock washer (86) to

computer bracket (6) and Left/Right

upright. Refer to picture on left.

5. Connect Water Bottle Tube (8) to the

computer up wire and computer bottom

wire. Put them inside the upright tube.

Connect Water Bottle Tube (8) to the

left/Right Upright. Use the 5# Allen

wrench (17) to lock bolt (83) and Lock

washer (86) to the computer bracket and

Left/Right upright. Refer to picture on

left.

7. Use Wrench W/Screw, drill through the

Bolt 4.2*19 (94) to right base cover(32)

Refer to picture on left.

Everest

STEP 7:

8. Put the safety key (65) on the

computer.

Everest

5. OPERATION GUIDE

1. OVERVIEW

2. LCD WINDOW DISPLAY

SPEED: Show speed, or show P1-P16 when setting programs, from 1.0-24.0KM/h

TIME: Show time, from 0.00-99.90

DIST.: Show distance, from 0.00-99.90

CAL: Show the calories, show 0.0-999.0

3. BUTTON FUNCTIONS

“PROGRAM” button: Press this button to choose program from manual mode—P01----P16--FAT;

“MODE” button: When machine in ready state, press this button to choose the mode: mode-time count down, mode-distance

count down, mode-calories count down;

“START” button: Press this button to start the machine, the machine will run at the lowest speed or at the speed of default

program after 3 seconds time count down;

“STOP” button: Press this button to stop the machine, the machine will stop smoothly;

“SPEED+”-: Adjust the speed. Press the button to adjust the speed when running, and adjust the data when stop;

“SPEED+”, “SPEED-”: Adjust the speed. Press the button to adjust the speed when running, and adjust the data when stop;

“INCLINE+”, “INCLINE -”：-6-20 sectional incline.

Adjust the incline. Press the button to adjust incline section when run, and adjust the data when stop;

FAN: On/off the fan.

4. MAIN FUNCTION

Open the power switch, the window will light, the machine will enter into ready state.

4.1. START-UP QUICKLY (MANUAL)

Attach the magnet end of the safety pulling rope to the computer, press ‘START’ button to start the machine, it will run at the

lowest speed, press SPEED+/- to adjust the speed. When you would like to stop machine, press the ‘STOP’ button or take

out the safety key directly

Inhaltsverzeichnis

Andere Life Span Tretmühle Handbücher

Life Span

Life Span Reformer 2 Safety Bedienungsanleitung

Life Span

Life Span Torque Bedienungsanleitung

Life Span

Life Span CHASER Bedienungsanleitung

Life Span

Life Span TR5500iC Bedienungsanleitung

Life Span

Life Span PRO 1 Bedienungsanleitung

Life Span

Life Span TR2500-HRC Bedienungsanleitung

Life Span

Life Span GOLD 2.0 Bedienungsanleitung

Life Span

Life Span Pursuit 3 Bedienungsanleitung

Life Span

Life Span BOOMER XT Bedienungsanleitung

Life Span

Life Span TR800B Bedienungsanleitung

Life Span

Life Span Access Bedienungsanleitung

Life Span

Life Span 1.3 Bedienungsanleitung

Life Span

Life Span Workplace DT-3 Bedienungsanleitung

Life Span

Life Span Chief Bedienungsanleitung

Life Span

Life Span TR3000i Gebrauchs- und Pflegehandbuch

Life Span

Life Span Diamond Bedienungsanleitung

Life Span

Life Span TR3000i Bedienungsanleitung

Life Span

Life Span BALANCE Bedienungsanleitung

Life Span

Life Span TR3000i Bedienungsanleitung

Life Span

Life Span Focus Bedienungsanleitung

Life Span

Life Span BOLT M2 Bedienungsanleitung

Life Span

Life Span Workplace DT-5 Bedienungsanleitung

Life Span

Life Span CORSAIR FREERUN 100 Bedienungsanleitung

Life Span

Life Span Trail Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack NTL12941 Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung