Life Span Workplace DT-5 Bedienungsanleitung

DT5, DT7

Treadmill/Bike Desk

Owner’s Manual

Table of Contents

Welcome

Getting Started

Welcome

Warranty

DT5 Desk Assembly

Assembly Instructions

Desk Leveling and Height Adjustment

DT7 Desk Assembly

Assembly Instructions

Desk Leveling and Height Adjustment

DT5 Manual Treadmill Desk Assembly

DT7 Electric Treadmill Desk Assembly

Treadmill Desk Operations

Specications

Setting the Clock

Starting the Treadmill Desk

Console Overview

Preset Key & Bluetooth

Innovative Features

Troubleshooting

Personal Settings

Display Details

Bike Desk Operations

Specications

Setting the Clock

Starting the Bike Desk

Console Overview

Preset Key & Bluetooth

Troubleshooting

Personal Settings

Display Details

Welcome

Congratulations on choosing the LifeSpan Workplace™ line of products. These

products give you the opportunity to remain productive while taking care of

yourself as you integrate movement with normally sedentary tasks.

The average American now spends eleven hours, ve days a week, sitting, and

burns one-hundred fewer calories each day than they did a few decades ago.

Sitting for long periods slows your metabolism, reduces calories burned, and

increases your risk for heart disease and diabetes.

Whether you plan on placing this product in a TV room, replace your desk at

home or are adding another workspace in the oce, LifeSpan Workplace™

products are a great way to add movement to an otherwise sedentary activity.

Before you assemble or operate your product, please read this manual

thoroughly. Important information, including safety precautions, ongoing

product maintenance, assembly instructions, and information on proper

operation are included.

If you need to contact LifeSpan customer service, visit our website at

www.LifeSpanFitness.com and select customer service. Complete the

information requested and we will respond to your inquiry within one

business day. In the United States and Canada you can also call

(877) 654-3837 and choose option 4.

Neither LifeSpan Fitness nor its representatives can accept responsibility for any damages or

injury incurred as a result of information presented in this manual except under the terms

of the product warranty.

Warranty

Your LifeSpan treadmill/bike desk comes with the following limited warranty

valid in North America and the United Kingdom. If you are outside of these

areas contact your local distributor for warranty information or visit

www.LifeSpanFitness.com.

LifeSpan warrants the equipment it manufactures is free from defects in

materials and workmanship under normal use and services. The periods above

are based on the date of purchase. During these periods, LifeSpan will repair

or replace any defective part. Free labor is included on all parts that are not

normally assembled or replaced by the customer within the labor period.

If within the time frames specied above, any part fails to operate properly,

and complete the form to request assistance or call 877.654.3837 option 4 for a

Customer Service Agent (please note that certain kinds of service should only

be performed by a qualied service technician).

LifeSpan reserves the right to make changes and improvements to our products

without incurring any obligations to similarly alter any product purchased.

In order to insure our product warranty and to ensure the safe and ecient

operation of your LifeSpan product, only authorized parts can be used. The

warranty is void if any parts other than those provided by LifeSpan are used.

Exclusions and Limitations:

• This warranty does not apply to any defects caused by negligence, misuse,

improper assembly, or maintenance, accident, or “act of God.”

• This warranty does not apply to discoloration of paints or plastics.

• LifeSpan shall not be responsible for incidental or consequential damages.

• This warranty is non-transferable form the original owner.

Registration

Should you need to process a warranty claim make sure you retain your

purchase receipt to verify the date of purchase and register your LifeSpan

product online. To complete the registration go to www.LifeSpanFitness.com

and select “Product Registration”.

Warranty

Frame

Parts

Labor

DT5

Lifetime

2 Years

1 Year

DT7

Lifetime

2 Years

1 Year

DT5 Desk: Assembly Instructions

At LifeSpan we strive to make our equipment easy to assemble and start

using. Parts that can be pre-assembled are always assembled and tested on

the product line.

Prior to starting the assembly process, take all the parts out of the box,

remove plastic bags and lay everything out on the oor to become familiar

with the components.

Since your desk is a heavy piece of equipment, it is recommended that you

use two people during assembly and follow these assembly instructions to

reduce any problems that may occur.

DT5 Desk: Assembly Instructions

16a

Hardware Included

Item# Part Description Item# Part Description

1 Lift Frame 8 LifeSpan Placard **

2 Desktop 9 M8x45L Bolt **

3 Left Base Foot 10 M8 Nuts **

4 Right Base Foot 11 Wire Cover

5M8 Washer ** 12 M10 Washer **

6 M10 Acorn Nut ** 13 U-Shape Frame

7 Height Ad. Knob 14 Console

**Pre-installed

A Desk Position Bumpers

BExtension Tube

C Desktop Mounting Bracket

Hardware Bag Contents

Item # Qty. Part Description

15 6 M6x40L Screw

16 8 #8x5/8L Screw

16a 2 #8x1/2L Screw

17 1 Wire Harness Cover

18 1 Wrench - 17mm

19 1 4mm Allen Wrench 20 1

5mm Allen

Wrench w/Phillips

Screwdriver

Table corresponds to the diagram on the left

Boxed Separately

5mm Allen

Wrench w/

Phillips

Wrench

Wire Harness

Cover

M6x40L

Screw

4mm Allen

Wrench

#8x5/8L

Screw

#8x1/2L

Screw

1110

DT5 Desk: Assembly Instructions

Step 1: Lift Frame Assembly

A. Position the Lift Frame (1),

Left Base Foot (3) and Right

Base Foot (4) as shown in

the gure to the right.

NOTE: The position of the

Desk Position Bumpers (A)

face inward, and the

long side of the Right and

Left Base Feet (3, 4) are

opposite of the Height

Adjustment Knobs (7)

B. Place the Lift Frame onto

the left and right Base Feet

mounting bolts and install

the M10 washers (5) and

M10 acorn nuts (6).

C. Tighten the four mounting

nuts.

Step 2: Install the Height

Adjustment Knobs

A. Locate the Height

Adjustment Knobs (7).

B. Screw the Height

Adjustment Knobs into the

Lift Frame (1) uprights as

shown in the gure to the

right.

C. Raise each Extension Tube

(B) to level 15 and tighten

the Height Adjustment

Knobs (7).

Step 3: Attach U-Frame to Underside of Desk

A. Lay the Desktop (2) face down on a smooth clean surface to attach the

U-Frame (13).

B. Position the U-Frame (13) as shown to the underside of the Desktop (2).

Be sure the open part of the frame faces toward the Cable Hole. The

stickers labeled "RRR" on the Desktop and U-Frame should be matched

together when assembled.

C. Attach the U-Frame to the Desktop using the six M6x40L Screws (15) using

the 4mm Allen Wrench (19).

16a

DT5 Desk: Assembly Instructions

Desk

Position

Bumpers

face

inward

Long Side

Short

Side

Wrench

Cable Hole

"RRR"

Stickers

M6x40L

Screw

4mm Allen

Wrench

"RRR"

Stickers

1312

216

Step 4C

Step 4D

Step 4C Step 5A:

Remove End

Caps

Step 5B & C:

Attach Console

10 5

DT5 Desk: Assembly Instructions DT5 Desk: Assembly Instructions

Step 4: Desktop Assembly

A. Make sure the Extension Tube (B) is at level 15 (done in step 2C).

B. Align the Desktop on top of the Extension Tubes (B) so the wire harness

from the Desktop U-Frame is on the same side as the wire harness

coming from the right extension tube. Gently lower the desktop support

frame onto the Desktop Mounting Bracket (C).

Step 5: Console Assembly

A. Using the 5mm Allen Wrench with Screwdriver (20) take out the two pre-

installed screws from the back and two screws from the bottom of each

console end cap so you can remove the end caps. Notice the dierence in

the screws from the back and bottom as you will be replacing them back

into their proper place.

B. Align the screw holes in the Console Bracket (14) with the pre-drilled holes

in the Desktop (2).

C. Using eight #8x5/8L Screws (16) attach the Console (14) to the Desktop (2).

D. Re-install the end caps with the pre-installed screws you removed in

Step A.

C. Insert four M8x45L carriage bolts (9) through the Mounting Brackets.

Install four M8 washers (5) and nuts (10). Securely tighten the four M8 nuts.

D. Connect the two wire harness connectors.

NOTE: Make sure the console wire harness or connector does

not get caught or pinched between the mounting bracket

and desktop frame.

NOTE: If the desktop tilts up and down slightly, re-tighten the four

bolts/nuts inserted in step 4C.

Wrench

#8x5/8L

Screw

5mm Allen

Wrench w/

Phillips

5mm Allen

Wrench w/

Phillips

Step 5D:

Re-Install

End Caps

1514

Desk Leveling

The desk needs to be leveled

prior to use. The desk comes

with two Adjustable Feet that

can be used to level the desk

and eliminate rocking. If the

desk is rocking on two of the

feet, adjust the two front feet

until all four feet are sitting

securely on the oor.

Desk Adjustment Feet

Desk Height Adjustment

A. Loosen the Adjustment Knobs (A)

on each upright by turning it no

more than two turns counter-

clockwise.

B. While rmly holding each

side of the Desktop, pull both

Adjustment Knobs out and slowly

raise or lower the desktop.

C. Release the Adjustment Knob as

the desired level is reached. The

Adjustment Knob will click into

place.

D. Check to make sure the desk

height is set at the same level on

both sides. Turn the Adjustment

Knobs clockwise to lock in place.

DT5 Desk: Desk Leveling and Height AdjustmentDT5 Desk: Assembly Instructions

Step 7: Attach the Wire Cover to the Right Extension Tube

A. Simply snap the Cover (11) over the Right Extension Tube (B). The

bottom of the cover will be resting on top of the Stop Bumper (D).

Step 6: Connecting the Wires

A. Underneath the front of the Desktop(2) connect the two 7-pin wire

harnesses together for console operation.

B. Attach the Console Wire Harness Cover (17) to the underside of the

Desktop(2) using two #8x1/2L Screws (16a). Push all the extra cable back

into U-Frame to help t cover in place.

16a

From Console

From U-Frame

under Desktop

Step 6A

Step 6B:

Attach Wire

Harness

Cover

Wire Harness

Cover

5mm Allen

Wrench w/

Phillips

Step 6B:

Attach Wire

Harness

Cover

#8x1/2L

Screw

1716

DT7 Desk: Assembly Instructions

At LifeSpan we strive to make our equipment easy to assemble and start

using. Parts that can be pre-assembled are always assembled and tested on

the product line.

Prior to starting the assembly process, take all the parts out of the box,

remove plastic bags and lay everything out on the oor to become familiar

with the components.

Since your desk is a heavy piece of equipment, it is recommended that you

use two people during assembly and follow these assembly instructions to

reduce any problems that may occur.

Table corresponds to the diagram on the left

DT7 Desk: Assembly Instructions

16a

Boxed Separately

Hardware Included

Item# Part Description Item# Part Description

1 Lift Frame 8 M8 Lock Nut **

2 Desktop 9 M8x15L Bolt **

3 Left Base Foot 10 Accessory Tray

4 Right Base Foot 11 M10 Washer **

5M8 Washer ** 12 LifeSpan Placard

6 M10 Acorn Nut ** 13 U-Shape Frame

7 M8x45L Bolt ** 14 Console

**Pre-installed

A Desk Position Bumpers

BExtension Tube

C Desktop Mounting Bracket

Hardware Bag Contents

Item # Qty. Part Description

15 6 M6x40L Screw

16 8 #8x5/8L Screw

16a 2 #8x1/2L Screw

17 1 Wire Harness Cover

18 1 Wrench - 17mm

19 1 4mm Allen Wrench 20 1

5mm Allen

Wrench w/Phillips

Screwdriver

5mm Allen

Wrench w/

Phillips

Wrench

Wire Harness

Cover

M6x40L

Screw

4mm Allen

Wrench

#8x5/8L

Screw

#8x1/2L

Screw

1918

DT7 Desk: Assembly Instructions

Step 1: Lift Frame Assembly

A. Position the Lift Frame (1),

Left Base Foot (3) and Right

Base Foot (4) as shown in

the gure to the right.

NOTE: The position of the

Desk Position Bumpers (A)

face inward, and the

long side of the Right

and Left Base Feet (3, 4)

are opposite of the

Access Panel

B. Place the lift frame

onto the left and right

base feet mounting

bolts and install the M10

washers (11) and M10

acorn nuts (6).

C. Tighten the four mounting

nuts.

Step 2: Accessory Tray Assembly

A. Remove the four

Screws (9) pre-

installed in the

bottom of the

Upright Assembly

Crossbar.

B. Line the holes in

the accessory tray

(10) with the holes

in the Crossbar.

C. Install four M8

washers and

M8x15 bolts (9) and

tighten.

DT7 Desk: Assembly Instructions

Step 3: Attach U-Frame to Underside of Desk

A. Lay the Desktop (2) face down on a smooth clean surface to attach the

U-Frame (13).

B. Position the U-Frame (13) as shown to the underside of the Desktop (2).

Be sure the open part of the frame faces toward the Cable Hole. The

stickers labeled "RRR" on the Desktop and U-Frame should be matched

together when assembled.

C. Attach the U-Frame to the Desktop using the six M6x40L Screws (15) using

the 4mm Allen Wrench (19).

Cable Hole

"RRR"

Stickers

M6x40L

Screw

4mm Allen

Wrench

16a

Desk

Position

Bumpers

face

inward

Long Side

Short

Side

Access

Panel

Wrench

Andere Handbücher für Workplace DT-5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Life Span Tretmühle Handbücher

Life Span

Life Span Diamond Bedienungsanleitung

Life Span

Life Span TRACTION-R Bedienungsanleitung

Life Span

Life Span BOOST Bedienungsanleitung

Life Span

Life Span TR 2000-HR Bedienungsanleitung

Life Span

Life Span BOLT M2 Bedienungsanleitung

Life Span

Life Span PRIME Bedienungsanleitung

Life Span

Life Span LFTM-VFOLD Bedienungsanleitung

Life Span

Life Span Jazz Bedienungsanleitung

Life Span

Life Span FORCE Bedienungsanleitung

Life Span

Life Span TR7000i Bedienungsanleitung

Life Span

Life Span TR5000i Bedienungsanleitung

Life Span

Life Span M3 Bedienungsanleitung

Life Span

Life Span SUPER XL Bedienungsanleitung

Life Span

Life Span VISION Bedienungsanleitung

Life Span

Life Span STYLE Bedienungsanleitung

Life Span

Life Span Equalizer Bedienungsanleitung

Life Span

Life Span PERFORMER PLUS Bedienungsanleitung

Life Span

Life Span GOLD Bedienungsanleitung

Life Span

Life Span TR8000i Bedienungsanleitung

Life Span

Life Span TR6000i Bedienungsanleitung

Life Span

Life Span PERFORMER II Bedienungsanleitung

Life Span

Life Span TEMPEST CR Bedienungsanleitung

Life Span

Life Span TR1000B Bedienungsanleitung

Life Span

Life Span BOOMER PLUS Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack NTL12941 Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung