Life Span SUPER XL Bedienungsanleitung

SUPER XL

USER’S

MANUAL

This is HIGH-POWER item; please DO NOT USE THE SAME OUTLET WITH OTHER

HIGH-POWER HOUSEHOLD APPLIANCE like air-conditioning etc.

Please choose an outlet exclusively for the machine and make sure the fuse is

10A.

Product may vary sli

htly from the item pictured due to model up

rades

IMPORTANT SAFETY PRECAUTIONS

1. Plug the power cord of the treadmill directly into a dedicated grounded circuit.

CAUTION: Before starting any exercise program, consult with your physician or health

professional.

IMPORTANT: Read all instructions carefully before using this product. Retain

this owner’s

manual for the future reference.

This product must be grounded well. If it has breakdown, grounding provides a path of

least resistance for electric current to reduce the risk of electric shock.

2. Position the treadmill on a clear and level surface. Do not place the treadmill on thick

carpet as it may interfere with proper ventilation. Also, do not place the treadmill near water

or outdoors.

3. Position treadmill so that the wall plug is visible and accessible.

4. NEVER start the treadmill while you are standing on the walking belt. After turning the

power on and adjusting the speed control, there may be a pause before the walking belt

begins to move, ALWAYS stand on the foot rails on the sides of the frame until the belt is

moving.

5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting

clothing which maybe caught by treadmill. Always wear running or aerobic shoes with rubber

soles.

6. Always unplug the power cord before removing the treadmill’s motor cover.

7. Keep small children away from the treadmill during operation.

8. Don’t let go of your hands until you are getting used to treadmill’s waking or running.

9. If you want to stop the exercise or the Treadmill suddenly increases in speed due to an

electronics failure, please be sure to put your hands on the both uprights firstly, and then

step on the ride rail to avoid the damage by moving running belt.

10. Always attach the safety key rope to your clothing when using the treadmill. If the

treadmill suddenly increases in speed due to an electronics failure or the speed being

inadvertently increased, the treadmill will come to a sudden stop when the safety key is

disengaged from the console. Pull off the safety key and keep it well when you do not use the

machine.

11. When the treadmill is not being used, the power cord should be unplugged and the safety

key should be removed.

12. Before starting any exercise program, consult with your physician or health professional.

He or she can help you to establish the exercise frequency, intensity (target heart zone) and

time appropriate to your particular age and physical condition. If you have any pain or

tightness in your chest, an irregular heartbeat, shortness of breath, feel faint or any

discomfort while you exercise, STOP IMMEDIATELY! Consult your physician before

continuing.

13. If you observe any damage or wear on the mains plug or on any section of the mains lead

then please have these replaced immediately by a qualified electrician – do not attempt to

change or repair these yourself.

14. When the treadmill is not being used, please pull out the safety lock and store up it in

order to prevent the children and other people from incorrectly using of the treadmill.

15.The pulse sensors are not medical devices. Various factors, including the user’s

movement, may affect the accuracy of heart rate readings. The pulse sensors are intended

only as exercise aids in determining heart rate trends in general.

For your information, please note following electronical specification of

Treadmill:

a. The input voltage: 240V±10% （50HZ）

b. Input current: ≤6A

C. The rating power: 2.0 Continuous HP ;

d. Time Range: 0:00-99:99

e. Speed Range: 1-20.00KM/H

f. Distance Range: 0.00-99.9KM

g. Calories range: 0-999CAL

h. Pulse range: 40-235times/ minute

IMPORTANT OPERATION INSTRUCTIONS

Be sure to read the entire manual before operating your machine.

Understand that changes in speed and incline do not occur immediately. Set your

desired speed on the computer console and release the adjustment key. The computer

will obey the command gradually.

Use caution while participating in other activities while walking on your treadmill; such

as watching television, reading, etc. These distractions may cause you lose balance or

stray from walking in the centre of the belt; which may result in serious injury.

In order to prevent losing balance and unexpected injury, NEVER mount or dismount

the treadmill while the belt is moving. This unit starts at a very low speed. Simply

standing on the belt during slow acceleration is proper before you have learned to

operate this machine.

Always hold on to handrail while making control changes.

A safety key is provided with this machine. Remove the safety key will stop the walking

belt immediately; the treadmill will shut off automatically. Insert the safety key will

reset the display.

Do not use excessive pressure on console control keys. They are precision set to

function properly with little finger pressure.

FOLDING INSTRUCTIONS

When folding the treadmill, pull out the handles on the holding spanner and place the main

frame at corresponding position. And then, the handle bolt will appear automatically. After

that, move the treadmill to another place so as to make it occupy a smaller area. Before

usage, place the treadmill to the position you would like to do exercise, and lift its main frame

by right hand and pull out the handles and place them on the floor slowly. Then the handles

will appear automatically. Finally screw down the handles firmly to release yourself from

being worried about the safety during exercise.

PARTS LIST

# Name Specification NR # Name Specification NR

1 Cross pan-headed

bolt ST4.2*12 10 51 Upper cover PS 1

2 Cross pan-headed

bolt ST4.2*15 13 52 Nether cover PS 1

3 Cross pan-headed

bolt ST4.2*15 headφ8 4 53 Rubber cushion φ30*16 φ5 6

4 Cross sunk-headed

bolt ST3.5*20 2 54 Running board

rubber cushion

Φouter29.5Xφ

inner 10X6 6

5 Cross pan-headed

bolt ST4.2*25 6 55 Nylon lace Length 100 7

6 Cross pan-headed

bolt ST4.2*12 headφ6 6 56 Thick nylon lace

length500mm

width 8mm

thickness 1.5mm

7 Cross pan-headed

bolt

ST4.2*15 headφ

6.5 6 57 Square cap □50*25*2.0 2

8 Cross pan-headed

bolt M6*12 teeth 2 58 sleeve 28*12 2

9 Cross pan-headed

bolt M5*12 teeth 4 59 Round cap φ32 length 300mm

thickness 5mm 2

10 Cross pan-headed

bolt M5*12 teeth 7 60 Round cap φ32 length 330mm

thickness 5mm 2

11 Cross sunk-headed

bolt M6*35 8.8 6 61 Handlebar cover ABS 1

12 Inner hexagonal

pan-headed bolt M8*15 S6 20 62 Plastic running

wheel φ48*φ8*21 2

13 Inner hexagonal

pan-headed bolt

M8*30 teeth

length 10 S6 2 63 Rubber running

wheel φ54*φ8*20 2

14 Inner hexagonal

pan-headed bolt

M8*50 teeth

length 10 S6 4 64 Wax tube Length 200mm 1

15 Inner hexagonal

pan-headed bolt

M8*50 teeth 10

S6 8.8 2 65 Round cap 1

16 Inner hexagonal

pan-headed bolt

M10X50 S6

teeth length

14 8.8

1 66 Switch φ10X400 1

17 Inner hexagonal

pan-headed bolt

M10X95 S6

teeth length10

8.8

1 65 Current wire φ34.5X32.5X110 2

18 Inner hexagonal

pan-headed bolt

M8*38 teeth

length 8 S6 2 66 Current connection

wire φ32 2

19 Inner hexagonal

pan-headed bolt

M10*30 teeth

8.8 4 67 Round sleeve 2

20 Inner hexagonal

bolt

M6*60 teeth

length S5 8.8 3 68 Round caps 350mm 1

21 Inner hexagonal

bolt

M8*30 S6 teeth

head φ<15 2 69 Plastic pedal 1

22 Inner hexagonal

bolt

M6*22 teeth

length 10 8.8 2 70 Gas spring 1

23 Inner hexagonal

bolt

M8*75 S6 8.8

teeth head φ<16 1 71 Magnetic circle φ25*φ15*12 2

24 Inner hexagonal

pan-headed bolt

M8x65 teeth

length 20 8 72 Front roller 20km/H φ90*φ50 1

25 Flat washer D5 11 73 Rear roller 1

26 Flat washer D8 10 74 Running belt 2400*450*1.6 1

27 Washer D8 24 75 Running board 1060*550*18

(6 hole) 1

28 Flat washer D10 3

29 Nylon nut M10 1 77 Current wire 6N-4 1

30 Nylon nut M8 4 78 Owner’s manual 1

# Name Specification NR # Name Specification NR

31 Nylon nut M6 9 79 Friction cushion 2

32 Spring washer D8 8 80 label 1

33 Spring washer D10 5 81 Current switch 1

34 Washer D5 inner teeth 1 82 Protecter 10A 250V 1

35 Spring washer D8 4 83 Connection wire 16#*170 1

36 sleeve Round steel：φ

13Xφ8.2X40.2 2 84 Connection wire 16#*170 1

37 Fixed pin φ5X1X12 2 85 Connection wire 16#*130 1

38 Pin spring φ8.2Xφ0.8X15 1 86 Connection wire 16#*130 1

39 Steel bushing

φ16*outerφ

14outer *φ

10.1*12

4 87 Circuit wire and

plug According to order 1

40 Washer 6 88 Motor 2.0HP 180VDC 1

41 Inner hexagonal

wrench S6 1 89 Lifting motor 1/15Hp 1

42 wrench S13、S14、S15 1 90 Display GM001 1

43 φ32 spring

sleeve 1 91 Square magnet Line length

1000mm 1

44 φ38 spring

sleeve 1 92 Hand pulse set Line length 380mm 2

45 Motor set 1 93 Trunk line 2 1200mm 1

46 Semicircular

caps 2 94 Trunk line 3 720mm 1

47 Decoration cover 1 95 Controller 1

48 Belt 20km/H 170J J6 1 96 transformer 1

49 Side slider 1038L*50W 2 97 Filter 63x51x38 1

50 Alloy cover M 1 98 Current protecter 1

ASSEMBLY PARTS

DELETE THIS COLUMN

Hardware contains

Part NO. Name Specification NR

I Production connection 1

II Plastic pedal 1

III Handlebar cover 1

VI 76. Oil 1

VII Safety key 1

3、Cross pan-headed bolt ST4.2*15 headφ8 2

12. inner hexagonal

pan-headed bolt M8*15 S6 4

14. inner hexagonal

pan-headed bolt

M8*50 teeth length10

S6 2

21. inner hexagonal

bolt

M8*30 S6

Head φ<15 2

24 、Cross pan-headed

bolt M8x65 teeth length 20 8

27、Washer D8 10

VIII

35、Spring washer D8 4

IX 78、Owner’s manual 1

Tools and nuts list：

Part NO. Name Specification NR

IV Cross-head

wrench S13，S14，S15 1

V Inner hexagonal

wrench S6 1

ASSEMBLY INSTRUCTIONS

1. Take out all the assembly parts from the treadmill package.

2．(1)Insert spring washer(35) into inner hexagonal pan-headed bolt(12), and fix them into

the sperate holes with inner hexagonal wrench ;

(2) insert the washer(27) into inner hexagonal pan-headed bolt(14)，and fix them into the

sperate holes with hexagonal wrench

(3) tighten left and right support, put decoration cover(47) onto the left and right support，

fix the cross pan-headed bolt(3) into the decoration cover(47).

3．(1) fix the inner hexagonal bolt(21) into left and right support.

(2) fix the cross pan-headed (7) into left and right support, and fasten them with

cross-head wrench.

4．Put the washer(27) into the inner hexagonal pan-headed bolt(24),and tighten the plastic

peddle fixed set to the left and right frames.

5.insert the flat washer(25) into the cross pan-headed bolt(9)，fix the display(90).

CAUTION:

1. DO NOT PLUG IN POWER CORD UNTIL FINAL ASSEMBLY IS COMPLETED AND MOTOR

COVER IS INSTALLED.

2. Do not attempt to assemble the treadmill until the assembly instructions are followed and the

uprights are attached to the treadmill. Failure to follow this can result in damage to the treadmill.

3. Your treadmill is a very heavy piece of exercise equipment and should be handled

with caution.

4. Children should not be allowed to play on the treadmill or move the treadmill deck up and down.

WE RECOMMEND YOU HAVE SOMEONE TO ASSIST YOU IN LIFTING AND ASSEMBLING

YOUR LIFESPAN TREADMILL. FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT WILL

MAKE IT EASIER TO ASSEMBLE YOUR LIFESPAN TREADMILL

Operation Guide

Inhaltsverzeichnis

Andere Life Span Tretmühle Handbücher

Life Span

Life Span TR 2000-HR Bedienungsanleitung

Life Span

Life Span BOOMER Bedienungsanleitung

Life Span

Life Span TR800 Bedienungsanleitung

Life Span

Life Span Delta 2.0 Bedienungsanleitung

Life Span

Life Span PRO Series Bedienungsanleitung

Life Span

Life Span TORQUE II Bedienungsanleitung

Life Span

Life Span SPORTZ Bedienungsanleitung

Life Span

Life Span Corsair FreeRun 105 Bedienungsanleitung

Life Span

Life Span GOLD Bedienungsanleitung

Life Span

Life Span STREAM Bedienungsanleitung

Life Span

Life Span TR3000i Bedienungsanleitung

Life Span

Life Span Super Bedienungsanleitung

Life Span

Life Span Workplace DT-3 Bedienungsanleitung

Life Span

Life Span TR7000i Bedienungsanleitung

Life Span

Life Span MARATHON Bedienungsanleitung

Life Span

Life Span TR3000i Bedienungsanleitung

Life Span

Life Span Viper M4 Bedienungsanleitung

Life Span

Life Span GOLD 2.0 Bedienungsanleitung

Life Span

Life Span WALKSTATION ML Bedienungsanleitung

Life Span

Life Span PERFORMER PLUS Bedienungsanleitung

Life Span

Life Span TR3000i Gebrauchs- und Pflegehandbuch

Life Span

Life Span TR1200B Bedienungsanleitung

Life Span

Life Span VIPER Bedienungsanleitung

Life Span

Life Span MyTread TR100 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack NTL12941 Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung