Lifetime 1306 Datenblatt

Copy

INSTRUCTION #1019128 B

The product you just purchased could be FREE!

benets:

1. You automatically will be entered to win $200 in our monthly drawing!

2. In the unlikely event of a product recall or safety modication, we can

notify you immediately and directly.

3. You may choose to receive Preferred Customer Announcements and

promotions regarding new Lifetime products.

www.lifetime.com

**U.S. and Canada customers ONLY**

IF ASSISTANCE IS NEEDED,

DO NOT CONTACT THE STORE!!!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)

Call, or visit our Website for Saturday hours.

Save this instruction in the event that the manufacturer has to be contacted for

replacement parts.

MODEL #1306

WARNING

To ensure your safety, do not attempt to assemble

this system without reading and following all

instructions carefully. Identify and inventory the

parts using the Parts List. Failure to comply with

any of the warnings in these instructions may

result in serious personal injuries such as cuts,

broken bones, nerve damage, paralysis, brain

injury, or death. Failure to comply may also result

in property damage. Please heed all warnings

and cautions.

POOL SIDE

BASKETBALL

SYSTEM

3/1/2007

**For customers outside the U.S. or Canada, please contact the store for assistance.**

Copy

Pole Section Identication

Identify the pole sections before beginning assembly. Failure to assemble the

pole sections correctly may result in severe personal injury or property damage

as described on Page Two.

ONCE THE POLE SECTIONS HAVE BEEN SEATED, THEY

CANNOT BE SEPARATED.

Top Pole:

Indented on the top

with holes down the

middle of the pole.

Bottom Pole:

Warning Sticker.

SAFETY INSTRUCTIONS

Most injuries are caused by misuse and/or not following instructions. Use

caution when using this system.

Owner must ensure that all players know and follow these rules for safe operation of

the system.

To ensure safety, do not attempt to assemble this system without following the

instructions carefully. Check entire box and inside all packing material for parts and/

or additional instruction material. Before beginning assembly, read the instructions

and identify parts using the hardware identier and parts list in this document.

Proper and complete assembly, use and supervision are essential for proper

orientation and to reduce the risk of accident or injury. A high probability of serious

injury exists if this system is not installed, maintained, and operated properly.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR

PROPERTY DAMAGE AND WILL VOID WARRANTY.

• If using a ladder during assembly, use extreme caution.

• Two capable adults are recommended for this operation.

• Check base daily for leakage. Leaks will cause system to fall.

• Assemble the pole sections properly. Failure to do so could cause the pole

sections to separate during play or transport.

PARTS LIST

ID Part # Description Qty.

TP 1004560 Top Pole 1

BP 1004561 Bottom Pole 1

RB AM01908D Right Backboard Bracket 1

LB AM02008D Left Backboard Bracket 1

CM ZJ13998 Backboard 1

CA DD00200 Net 1

CB AM01500 Rim Support Channel 1

CC 1006728 Slide Collar 1

CE 510022 Wheel 2

CF B110001 1/2” x 15 3/4” Axle 1

CG CH06899 Pole Locking Knob 3

CH CF00199 1 1/4” Base Plug 2

CI CB02498K Base 1

600248E Warning Sticker (Applied) 1

CJ BD00200 1/2” x 7” Axle 1

CK 825614 Rim 1

CL ZA05208 Pole Brace 2

Base Hardware (HD9129)

BA 300097 5/16” Nylock Nut 2

BB 302002 5/16” x 4 1/2” Tap Bolt 1

BC 302012 5/16” Zinc-Plated Nut 1

BD 302014 5/16” Flat Washer 4

ProCourt®Hardware (1018623)

PC 300075 5/16” Flange Lock Nut 2

PD 300095 5/16” Cap Nut 1

BC 302012 5/16” Zinc-Plated Nut 1

PH 302062 5/16” x 3 1/4” Hex Bolt 2

PJ 1000805 5/16” x 3 1/4” Carriage Bolt 2

BD 302014 5/16” Flat Washer 1

PK BS00800 5/16” x 1” Screw 2

PL 1018565 Pole Spacer 2

Rim Hardware (HH03600)

RA 300027 5/16” x 1 3/4” Hex Bolt 2

BD 302014 5/16” Flat Washer 4

RD BB01400 2” U-Bolt 1

RE 302090 5/16” Nylock Flange Nut 4

Cement Anchor Hardware (HD9102B)

AA 300031 3/8” Flat Washer 2

AB 300137 3/8” x 1” Hex Bolt 2

BD 302014 5/16” Flat Washer (not used) 2

AD 302204 Cement Anchor 2

AE 300105 5/16” x 1 1/4” Hex Bolt 2

AF 500529 6” Chain 2

Pole Joint Hardware (HH04100B)

JA BS02000 1/4” x 3/4” Screw (not used) 1

JB 500032 1/2” x 1/8” Poly Spacer 2

HARDWARE IS ACTUAL SIZE

(Unless otherwise indicated)

BC BD

PC PH

(Not actual size)

RA RE

AB AE

(Not actual

size)

Before Beginning Assembly

A. Keep the hardware bags and their contents separate. If any

parts are missing, call our Customer Service Department.

B. Test t all Bolts by inserting them into their respective holes.

If necessary, carefully scrape away any excess powder coating

buildup from inside the holes. Do not scrape away all of the

powder coating. Bare metal may rust. You may need to pound

some Bolts into place with a hammer or mallet.

Tools and Materials Required for Assembly

(Not Included)

1. Adjustable Wrench

2. Water Supply

3. 1/2” Wrenches (2)

4. 9/16” Wrench

5. 3/8” Socket Wrench

6. Marker/Pencil

POLE CARE AND SYSTEM MAINTENANCE

The life of your basketball system depends on many variables. The climate, exposure to corrosives

such as salt, pesticides, or herbicides, and excessive use or misuse can all contribute to pole

failure, which may cause property damage or personal injury.

Check your basketball system frequently for loose hardware, excessive wear, and signs of corrosion.

For safety reasons, and to prolong the life of your basketball system, you must take the

following preventive measures.

a. Check all Nuts and Bolts. If any are loose, tighten them.

b. Check all parts for excessive wear and tear. If necessary, replace any parts that have been

worn or damaged through usage. Contact our Customer Service Department for replacement

parts.

c. Inspect the Warning Sticker on the pole. If it is ripped, faded, or illegible, call our Customer

Service Department to request a replacement Sticker.

d. Check all pole sections for visible rust or chipped or cracked paint. If either are present, do

the following:

1. Use an emery cloth to completely remove any rust or chipped paint.

2. Clean the area with a damp cloth and allow it to dry.

3. Apply two coats of a rust preventative, high gloss enamel paint to the area. Allow the

paint to dry between coats.

IF RUST HAS PENETRATED THROUGH THE POLE ANYWHERE, REPLACE IT

IMMEDIATELY!

7. Hammer

8. Electric Drill with

masonry bit

9. Tape Measure

10. 5/16” Hex Bolt

**A MINIMUM OF TWO ADULTS ARE

REQUIRED FOR ASSEMBLY**

Required For

This Page: (1)

(2)

1018623

(1)

1/2” Wrench

Make sure the

crimped side

of the Top Pole

faces the same

direction as the

Warning Sticker.

(1)

Insert the Top Pole (TP)

through the bottom of

the Bottom Pole (BP).

Pull the Top Pole through the

Bottom Pole far enough to

clear the square hole near the

bottom of the Bottom Pole.

WARNING

Do not overtighten the Cap

Nut. If the end of the Bolt

breaks through the plastic

cap, call our Customer Service

Department at the number on

Page Two. Exposed threads on

the end of the Bolt may cause

serious injuries such as those

listed on Page Two.

Position the Top Pole (TP)

at its lowest height setting.

You may need to use a 5/16”

Bolt to push the Nut (BC)

into one of the Pole Locking

Knobs (CG).

PD Tighten the Nut securely.

Be sure to use the Zinc

Nut (BC).

Place the Base (CI) over

the 1/2” x 15 3/4” Axle

(CF) and step on the

Base so the Axle ts into

the slots in the bottom of

the Base.

Rotate the Pole up so

the 1/2” x 7” Axle (CJ)

ts into the slots in the

top of the Base.

7Lay the pole on the ground with the crimped side of

the Top Pole resting on the ground.

(2)

HH04100B

Required For This Page:

1/2” Wrenches

Snap the Slide Collar (CC) onto the Bottom Pole.

The head of the Tap Bolt (BB) ts into the hex-shaped hole in one

of the Locking Knobs (CG).

CL CL

Make sure the pole is

vertical before completely

tightening all Base and

Pole Brace hardware.

Tip the system forward

so the pole is resting on

the ground. DO NOT

stand the system up until

it is lled with weight

later in the instructions.

HD9129

(1)

HD9102B

BD (2)

(4)

(2)

The straight end of the Pole Brace (CL)

attaches to the Base (CI). The angled

end attaches to the pole. Complete for

both sides of the Base.

Only nger tighten

the Nuts now.

Tighten all Nuts

securely now.

Required For This Page:

1/2” Wrenches

HH03600

**Two Adults Required

for this Step**

(2)

1018623 PC

(2)

Only nger tighten

the Nuts (RE) now.

(4) RE

(4)

Inhaltsverzeichnis

Andere Lifetime Sport & Outdoor Handbücher

Lifetime

Lifetime STREAMLINE 90114 Bedienungsanleitung

Lifetime

Lifetime VISTA Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 71286 Bedienungsanleitung

Lifetime

Lifetime QUICK ADJUST 1531 Bedienungsanleitung

Lifetime

Lifetime PORTABLE PROCOURT 90688 Bedienungsanleitung

Lifetime

Lifetime ACTION GRIP 90020 Bedienungsanleitung

Lifetime

Lifetime QUICK ADJUST 1044 Bedienungsanleitung

Lifetime

Lifetime 1558 Bedienungsanleitung

Lifetime

Lifetime 90824 Bedienungsanleitung

Lifetime

Lifetime 60045 Bedienungsanleitung

Lifetime

Lifetime 1601 Bedienungsanleitung

Lifetime

Lifetime STREAMLINE 1268 Bedienungsanleitung

Lifetime

Lifetime 91062 Bedienungsanleitung

Lifetime

Lifetime POOLSIDE 91213 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 91003 Bedienungsanleitung

Lifetime

Lifetime FRONT ADJUST 90607 Bedienungsanleitung

Lifetime

Lifetime 90061 Bedienungsanleitung

Lifetime

Lifetime 90230 Bedienungsanleitung

Lifetime

Lifetime COMPETITION Series XL POWER LIFT 71525 Kurzanleitung

Lifetime

Lifetime 3823 Kurzanleitung

Lifetime

Lifetime STREAMLINE 90670 Bedienungsanleitung

Lifetime

Lifetime POOLSIDE 1301 Bedienungsanleitung

Lifetime

Lifetime QUICK ADJUST 90023 Bedienungsanleitung

Lifetime

Lifetime QUICK ADJUST 90518 Bedienungsanleitung

Beliebte Sport & Outdoor Handbücher anderer Marken

Flybar

Flybar POGO TRICK BOARD Bedienungsanleitung

Crivit

Crivit 93713 Bedienungsanleitung

Hudora

Hudora 76171 Montageanleitung

Axler

Axler GSU-1 Bedienungsanleitung

Aquaglide

Aquaglide FREEFALL 6 LANDING PAD Bedienungsanleitung

Cap Strength

Cap Strength POWER RACK FM-CS7000F Bedienungsanleitung

La Sportiva

La Sportiva RACE BORG Bedienungsanleitung

Crivit

Crivit 302640 Bedienungsanleitung

Sportime

Sportime Equalizer Bedienungsanleitung

T&R Sports

T&R Sports 5FT FOOSBALL TABLE Bedienungsanleitung

Salewa

Salewa VERT Bedienungsanleitung

KICK

KICK Decagon Bedienungsanleitung

byox

byox FJ-4.5FT Bedienungsanleitung

CHINESPORT Spa

CHINESPORT Spa 01325 Bedienungsanleitung

AXI.COM

AXI.COM ConesPro101 Bedienungsanleitung

Insportline

Insportline IN 2052 Bedienungsanleitung

Rugged Interactive

Rugged Interactive CardioWall Compact Kurzanleitung

ItsaGoal

ItsaGoal FOOTIEGOALS Bedienungsanleitung