Lifetime 71526 Kurzanleitung

**For U.S. and Canada Customers ONLY:**

IF ASSISTANCE IS NEEDED,

DO NOT CONTACT THE STORE!!!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)

**Customers outside the U.S. or Canada, please contact the store.**

6/23/2010

VISIT THE LIFETIME WEB SITE:

WWW.LIFETIME.COM

ASSEMBLY INSTRUCTIONS

AND OWNER’S MANUAL

WARNING

Failure to comply with any of the warnings

in these instructions may result in serious

personal injuries such as cuts, broken bones,

nervedamage,paralysis,braininjury,ordeath.

Failure to comply may also result in property

damage. Please heed all warnings and

cautions.Toensureyoursafety,donotattempt

to assemble this system without reading and

followingall instructions carefully. Identifyand

inventory the parts using the Parts List.

Save this instruction in the event that the manufacturer has to be contacted for replacement parts.

INSTRUCTION #1030942 B

**A MINIMUM OF TWO

ADULTS ARE REQUIRED FOR

ASSEMBLY**

BACKBOARD AND

RIM COMBO

MODEL #71526

PARTS LIST

ID Part # Description Qty

AA 825619 Rim 1

AB 1030727 Backboard 1

AC 502005 Net 1

AD 502056 Plastic Guard 1

AE 800165 Rim Cover Plate 1

AH CA00299 Frame Pad Left 1

AF CA00399 Frame Pad Right 1

AG CA00999 Bottom Frame Pad 2

Rim Hardware (HD9136B)

RA BS01000 #7 x 3/8” Screw 4

RB 300104 3/8” Push Nut 2

RC 300106 5/16” x 2” Carriage Bolt 2

RD 300114 5/16” Push Nut 2

RE 302011 5/16” x 1 1/4” Carriage Bolt 2

RF 302014 5/16” Flat Washer 2

RG 302061 5/16” x 5” Hex Bolt 2

RH 302090 5/16” Nylock Flange Nut 6

RI 502060 Compression Spring 2

RJ 510038 3/8” x 5 1/2” Axle 1

RK 804018 Rim Pivot Bracket 1

RL 804033 Spring Retainer Plate 1

Frame Pad Hardware (HH00700)

FA BS00100 #10 x 7/8” Screw 10

Tools and Materials

Required for assembly

(Not Included)

1. Adjustable Wrench

2. 1/2” Wrenches (2)

3. Electric Drill

4. 1/2” Socket Wrench

HARDWARE IS ACTUAL SIZE

(unless otherwise indicated)

SAFETY INSTRUCTIONS

RB RC RD RE RF

Failure to follow these safety instructions may result in serious injury or property damage and will void the warranty.

The owner must ensure that all players know and follow these rules for safe operation of the system. Proper and complete

assembly, use, and supervision is essential for proper operation and to reduce the risk of accident or injury. A high

probability of serious injury exists if this system is not installed, maintained, or operated properly.

• If using a ladder during assembly, use extreme caution. Follow all warnings and cautions on the ladder carefully. • Two

people are required for assembly. • Climate, corrosion, or misuse could result in system failure. • If technical assistance

is required, contact the manufacturer.

Most injuries are caused by misuse and/or failure to follow instructions. Use caution when using the system.

1. The Backboard can be mounted to any Lifetime Products®brand pole or most other commercially available poles. If using other than a Lifetime Products®pole, the mounting bracket design

must provide adequate support behind the Rim mounting holes as well as the upper Backboard mounting holes. If adequate support is not provided, the Backboard may be damaged and

the warranty will be void. Lifetime Products, Inc.®offers a pole system with a height adjusting mechanism that can be used to safely mount this Backboard. Please Call Customer Service at

the number on Page One for more information.

2. If using an existing pole system that does not include extension arms, or if a pole system is not being used, see Page 8.

RK RL

(Not actual size)

BEFORE BEGINNING ASSEMBLY

A. Identify and inventory all parts using the checklist boxes on the Parts List. Keep the hardware bags and their contents

separate. If any parts are missing, call our Customer Service Department.

B. Test ﬁt all Bolts by inserting them into their respective holes. If necessary, carefully scrape away any excess powder coating

buildup from inside the holes. Do not scrape away all of the powder coating. Bare metal may rust.

ATTENTION: This Backboard is not designed for custom installations. The

Backboard is designed for use with a Lifetime Products®Pole Mounting

Unit or Universal Mounting Bracket. If a Pole or Mounting Bracket is

being used, mount the Backboard and Rim using the hardware included

with the Pole system or Mounting kit and according to the directions

included with that product. Depending upon which mounting method is

used, you will follow either Option 1 or 2 according to indications on the

next page. The Pole or Mounting Bracket will include a set of Backboard

Brackets. Note: A Universal Mounting Bracket will allow you to install the

Backboard to a wall, roof, or 3 1/2” Pole.

NOTE: Do not mount the Rim directly to the Backboard. The strike

plate on the Backboard is not designed to hold the weight of the Rim,

and will not be able to support it. If you need to mount the Rim to the

Backboard without using a Pole system or Universal Bracket system,

you must place a metal support plate behind the Backboard. Failure

to use a support plate will result in damage to the Backboard. Support

must also be provided at the top of the Backboard using the Carriage

Bolts in the slots as shown on Page 5 in these instructions.

WARNING

The Rim and Backboard Combo kit must be mounted

and supported properly. Damage will occur if sufﬁcient

Rim support is not provided.

NOTE: e Backboard Brackets shown are Lifetime Products®models

and are for illustration purposes only. If using Brackets other than the

Lifetime Products®models shown here, refer to the instructions provided

with the Brackets.

Required for

this page:

(4)

(2)

(1)

(Not

actual

size)

OPTION 1 THIS OPTION IS FOR USE WITH BACKBOARD BRACKETS WITHA U-BOLT.

ASSEMBLE THE U-BOLT (PROVIDED WITH THE BACKBOARD BRACKETS) TO THE BACKBOARD BRACKETS

ACCORDING TO THE INSTRUCTIONS PROVIDED IN THE POLE OR MOUNTING BRACKET UNIT.

If you have Backboard Brackets (pictured at right) and

they come with a U-Bolt, use Option 1 and the U-Bolt

provided with the Brackets. If the Backboard Brackets

do not include a U-Bolt, use Option 2 instead.

U-Bolt

Backboard

Brackets

1A.1 Lay the Backboard (AB) on a table or bench.

1A.2 The U-Bolt (UB) goes through the top holes in the bottom

of the Backboard.

Note: Only hand tighten

the Nuts (RH) now.

RE RE RE

1B.1 Slide the Carriage Bolt (RE) into the

crimped slot in each Backboard channel.

1C.1 BendtheBackboardBrackets outso the

lower holes go over the Carriage Bolts. Caution: Do not

overtighten these

Nuts.

1C.2 Completely tighten the

Nuts (RH) from Step 1A.

To ﬁnish the assembly, turn to Page 6

1/2” Wrench

HD9136B

(2)

Required for this page:

(Not actual

size)

HD9136B

(2)

(4)

(2)

(1)

OPTION 2 THIS OPTION IS FOR ASSEMBLY WITH BACKBOARD BRACKETS BUT WITHOUTA U-BOLT.

1/2” Wrench

NOTE: The Backboard Brackets shown are Lifetime Products®

models and are for illustration purposes only. If using Brackets

other than the Lifetime Products®models shown here, refer to the

instructions provided with the Brackets.

1A.1 Lay the Backboard (AB) on a table or bench.

RE (2)

1B.1 Slide a Carriage Bolt (RE) into

the crimped slot in each backboard

channel.

RH RH

To ﬁnish the assembly, turn to Page 6

1C.1 Bendthe BackboardBracketsout sothe

lower holes go over the Carriage Bolts.

Note: Do not overtighten

these Nuts (RH).

1C.2 Completely tighten

the Nuts (RH) from Step

1A.

1A 1B

1A.2 The 5/16” x 5” Hex Bolts (RG) go

through the top holes in the bottom of the

Backboard.

Note: Only hand tighten

the Nuts (RH) now.

Required For

This Page:

1/2” Wrench

33.1 Turn the Backboard over so it faces up.

RH RH

5.1 SlidetheCompression

Springs (RI) onto the

legs of the U-Bolt or Hex

Bolts.

66.1 Tighten the Nylock

Flange Nuts (RH) until

the Rim is under the desired

tension.

RH (2)

RA (4)

(Not

actual

size)

(1)

HD9136B

Screwdriver

4.1 If the unit with the

U-Bolt includes Jam Nuts

(pictured actual size below) they

are to be secured onto the ends of

the U-Bolt or Hex Bolts here.

RD (2)

7.1 Fasten the Rim Cover

Plate (AE) to the Rim (AA)

using the #7 x 3/8” Screws (RA).

1/2” Socket

Wrench

2.1 Use the 1/2” socket head

from the socket head wrench to

press one Push Nut (RD) onto one end

of the Axle (RJ).

Note: The Push Nut should rest about 1/4”

from the end of the Axle. If the Push Nut

slips on too far, continue sliding it to the

other end of the Axle to remove it and try

again.

3.1 Slide the end of the Axle (RJ) through the Rim (AA) and the Rim Pivot Bracket (RK).

Press the Push Nut (RD) onto the end of the Axle. Use the 1/2” socket head to secure the

Push Nut if needed.

Required for This Page: 8

Electric Drill

FA (8)

HH00700

FROM THIS POINT ON FOLLOW THE INSTRUCTIONS PROVIDED

WITH THE POLE OR MOUNTING UNIT.

If you have purchased this combo unit to be attached to a pole-only unit, refer to the pole-only unit for instructions on how to assemble

and attach the combo unit to the pole.

NOTE: FAILURE TO PROVIDE ADEQUATE SUPPORT BEHIND THE BACKBOARD WILL VOID THE PRODUCT WARRANTY.

FOLLOW ALL ASSEMBLY INSTRUCTIONS CAREFULLY.

8.1 Remove the plastic ﬁlm from the Backboard.

Note: The lip of the Frame Pad overlaps the front of the Backboard.

8.3 Use an electric drill to insert the Screws #10 x 7/8“ (FA).

8.2 Attach the Bottom Frame Pad ﬁrst. Align the small line in the

back of the Bottom Frame Pad with the seam in the Backboard

frame.

ACCESSORIES AVAILABLE FOR MORE BASKETBALL FUN!

PRODUCT DESCRIPTION MODEL #

Universal Extension Bracket 9594

Intermediate Size Basketball 594201

Ideal for mounting Backboard and

Rimsetstoapole,wallorroof.(Back-

board and Rim not included.)

Universal Extension Bracket #9594

To place orders, use a Master Card or Visa and call

our Customer Service Department or send check or

money order to:

LIFETIME PRODUCTS, INC.

P.O. BOX 160010

BLDG. D-11, FREEPORT CENTER

CLEARFIELD, UT 84016-0010

Call theCustomer ServiceDepartment

at the number on Page One for prices

and shipping costs.

If mounting the Backboard to a roof mount, wall

mount or existing pole mount that does not have

an extension provided, you must use a Mounting

Bracket Kit designed for this purpose. Lifetime

Products, Inc.®offers a Universal Extension

Bracket, Model #9594, through our Customer

Service Department. Figures A, B and C show

the Bracket mounted to a roof mount, a wall

mount and an existing pole mount. Please see

below for ordering information.

FIGURE C, EXISTING POLE

MOUNT

FIGURE B, WALL MOUNTFIGURE A, ROOF MOUNT

ROOF MOUNT, WALL MOUNT, EXISTING POLE MOUNT

Useextreme caution when standing on laddersto

perform assembly steps. Follow all warnings and

cautionsontheladder.Failureto follow all of these

instructions and warnings could lead to serious

personal injury or property damage.

WARNING

LIFETIME BASKETBALL EQUIPMENT

5-YEAR LIMITED FACTORY WARRANTY

THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE.

1. Lifetime basketball systems are warranted to the original purchaser to be free from defects in material or workmanship for a period of

five years from the date of original retail purchase. The word “defects” is defined as imperfections that impair the use of the product.

Defects resulting from misuse, abuse or negligence will void this warranty. This warranty does not cover defects due to improper

installation, alteration or accident. This warranty does not cover damage caused by vandalism, rusting, “acts of nature” or any other

event beyond the control of the manufacturer.

2. This warranty is nontransferable and is expressly limited to the repair or replacement of defective basketball equipment. If the equipment

is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser. Shipping

charges to and from the factory are not covered and are the responsibility of the purchaser. Labor charges and related expenses for removal,

installation or replacement of the basketball system or its components are not covered under this warranty.

3. This warranty does not cover scratching or scuffing of the product that may result from normal usage. In addition, defects resulting from

intentional damage, negligence, unreasonable use or hanging from the net or rim will void this warranty.

4. Liability for incidental or consequential damages is excluded to the extent permitted by law. While every attempt is made to embody the highest

degree of safety in all equipment, freedom from injury cannot be guaranteed. The user assumes all risk of injury resulting from the use of this

product. All merchandise is sold on this condition, and no representative of the company may waive or change this policy.

5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional

or commercial use will void the warranty.

6. This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for use. Neither

Lifetime Products, Inc., nor any representative assumes any other liability in connection with this product.

ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A SALES RECEIPT.

REPORT PRODUCT DEFECTS IN WRITING TO:

Lifetime Products, Inc., PO Box 160010 Clearfield, UT 84016-0010

or call (800) 225-3865 M-F 8 a.m. to 5 p.m. MST.

Please include your dated sales receipt and photographs of damaged parts.

To Register Your Product, Visit Our Website at www.lifetime.com

Andere Handbücher für 71526

Inhaltsverzeichnis

Andere Lifetime Sport & Outdoor Handbücher

Lifetime

Lifetime 3823 Kurzanleitung

Lifetime

Lifetime 90718 Bedienungsanleitung

Lifetime

Lifetime 0023 Kurzanleitung

Lifetime

Lifetime QUICK ADJUST 1531 Bedienungsanleitung

Lifetime

Lifetime ACTION GRIP 90631 Bedienungsanleitung

Lifetime

Lifetime 1221 Bedienungsanleitung

Lifetime

Lifetime SPEED SHIFT Bedienungsanleitung

Lifetime

Lifetime SPEED SHIFT Bedienungsanleitung

Lifetime

Lifetime ACTION GRIP 90853 Bedienungsanleitung

Lifetime

Lifetime 3823 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 90757 Bedienungsanleitung

Lifetime

Lifetime PROCOURT 90073 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 71524 Bedienungsanleitung

Lifetime

Lifetime 3819 Bedienungsanleitung

Lifetime

Lifetime PUMP ADJUST 90487 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 90675 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 71281 Bedienungsanleitung

Lifetime

Lifetime CRANK ADJUST Bedienungsanleitung

Lifetime

Lifetime 73729 Kurzanleitung

Lifetime

Lifetime FRONT ADJUST 90607 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT Kurzanleitung

Lifetime

Lifetime PUMP ADJUST 90469 Bedienungsanleitung

Lifetime

Lifetime 1601 Bedienungsanleitung

Lifetime

Lifetime PUMP ADJUST 90602 Bedienungsanleitung

Beliebte Sport & Outdoor Handbücher anderer Marken

Flybar

Flybar POGO TRICK BOARD Bedienungsanleitung

Crivit

Crivit 93713 Bedienungsanleitung

Hudora

Hudora 76171 Montageanleitung

Axler

Axler GSU-1 Bedienungsanleitung

Aquaglide

Aquaglide FREEFALL 6 LANDING PAD Bedienungsanleitung

Cap Strength

Cap Strength POWER RACK FM-CS7000F Bedienungsanleitung

La Sportiva

La Sportiva RACE BORG Bedienungsanleitung

Crivit

Crivit 302640 Bedienungsanleitung

Sportime

Sportime Equalizer Bedienungsanleitung

T&R Sports

T&R Sports 5FT FOOSBALL TABLE Bedienungsanleitung

Salewa

Salewa VERT Bedienungsanleitung

KICK

KICK Decagon Bedienungsanleitung

byox

byox FJ-4.5FT Bedienungsanleitung

CHINESPORT Spa

CHINESPORT Spa 01325 Bedienungsanleitung

AXI.COM

AXI.COM ConesPro101 Bedienungsanleitung

Insportline

Insportline IN 2052 Bedienungsanleitung

Rugged Interactive

Rugged Interactive CardioWall Compact Kurzanleitung

N-FLATABLES

N-FLATABLES Belly Bouncer Fire Dog Bedienungsanleitung