Lifetime 73729 Kurzanleitung

4/17/2012

ASSEMBLY INSTRUCTIONS AND

OWNER’S MANUAL

WARNING

Failure to comply with any of the warnings in

these instructions may result in serious personal

injuries such as cuts, broken bones, nerve

damage, paralysis, brain injury, or death. Failure

to comply may also result in property damage.

Please heed all warnings and cautions. To

ensure your safety, do not attempt to assemble

this system without reading and following all

instructions carefully. Identify and inventory the

parts using the Parts List.

**For U.S. and Canada Customers ONLY:**

IF ASSISTANCE IS NEEDED,

DO NOT CONTACT THE STORE!!!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (MST)

Call, or visit our Web site for Saturday hours

**Customers outside the U.S. or Canada, please contact the store.**

Save this instruction in the event that the manufacturer has to be contacted for replacement parts.

INSTRUCTION #1030954 D

**A MINIMUM OF TWO ADULTS ARE

REQUIRED FOR ASSEMBLY**

BACKBOARD AND RIM COMBO

MODEL #73729

www.lifetime.com

COPY

PARTS LIST

ID Part # Description Qty

AA 825619 Rim 1

AB 1030889 Backboard 1

AC 502005 Net 1

AD 502056 Plastic Guard 1

AE 800165 Rim Cover Plate 1

AF CB08999 Corner Frame Pad 2

AG CB09099 Center Frame Pad 1 AH

804018 Rim Pivot Bracket 1

AI 804033 Spring Retainer Plate 1

Rim Hardware (HD9136B)

RA BS01000 #7 x 3/8” Screw 4

RC 300106 5/16” x 2” Carriage Bolt 2

RD 300114 5/16” Push Nut 2

RE 302011 5/16” x 1 1/4” Carriage Bolt 2

RF 302014 5/16” Flat Washer 2

RG 302061 5/16” x 5” Hex Bolt 2

RH 302090 5/16” Nylock Flange Nut 6

RI 502060 Compression Spring 2

RJ 510038 3/8” x 5 1/2” Axle 1

Frame Pad Hardware (HH00700)

FA BS00100 #10 x 7/8 Self Drilling Screw 10

1. Adjustable Wrench

2. 1/2” Wrenches (2)

3. Electric Drill

4. 1/2” Socket Wrench

HARDWARE IS ACTUAL SIZE

(Unless otherwise indicated)

SAFETY INSTRUCTIONS

RC RD RE RF RG

Failure to follow these safety instructions may result in serious injury or property damage and will void the warranty. The owner must ensure that all

players know and follow these rules for safe operation of the system.

tProper and complete assembly, use, and supervision is essential for proper operation and to reduce the risk of accident or injury.

A high probability of serious injury exists if this system is not installed, maintained, or operated properly.

t*GVTJOHBMBEEFSEVSJOHBTTFNCMZVTFFYUSFNFDBVUJPO'PMMPXBMMXBSOJOHTBOEDBVUJPOTPOUIFMBEEFSDBSFGVMMZ

t5XPQFPQMFBSFSFRVJSFEGPSBTTFNCMZ

t$MJNBUFDPSSPTJPOPSNJTVTFDPVMESFTVMUJOTZTUFNGBJMVSF

t*GUFDIOJDBMBTTJTUBODFJTSFRVJSFEDPOUBDUUIFNBOVGBDUVSFS

Most injuries are caused by misuse and/or failure to follow instructions. Use caution when using the system.

1. The Backboard can be mounted to any Lifetime Products®brand pole or most other commercially available poles. If using other

than a Lifetime Products®QPMFUIFNPVOUJOHCSBDLFUEFTJHONVTUQSPWJEFBEFRVBUFTVQQPSUCFIJOEUIF3JNNPVOUJOHIPMFT

BTXFMMBTUIFVQQFS#BDLCPBSENPVOUJOHIPMFT*GBEFRVBUFTVQQPSUJTOPUQSPWJEFEUIF#BDLCPBSENBZCFEBNBHFEBOE

the warranty will be void. Lifetime Products, Inc.®offers a pole system with a height adjusting mechanism that can be used to

safely mount this Backboard. Please Call Customer Service at the number on Page One for more information.

2. If using an existing pole system that does not include extension arms, or if a pole system is not being used, see Page 8.

*Not all Hardware will be used.

Tools and Materials Required for

assembly

(Not Included)

COPY

BEFORE BEGINNING ASSEMBLY

A. Identify and inventory all parts using the checklist boxes on the Parts List. Keep the hardware bags and their contents separate. If any parts

are missing, call our Customer Service Department.

B. Test ﬁt all Bolts by inserting them into their respective holes. If necessary, carefully scrape away any excess powder coating buildup from inside

the holes. Do not scrape away all of the powder coating. Bare metal may rust.

ATTENTION: This Backboard is not designed for custom installations. The Backboard is

designed for use with a Lifetime Products®Pole Mounting Unit or Universal Mounting

Bracket. If a Pole or Mounting Bracket is being used, mount the Backboard and Rim

using the hardware included with the Pole system or Mounting kit and according

to the directions included with that product. Depending upon which mounting

method is used, you will follow either Option 1 or 2 according to indications on the

next page. The Pole or Mounting Bracket will include a set of Backboard Brackets.

Note: A Universal Mounting Bracket will allow you to install the Backboard to a wall,

roof, or 3 1/2” Pole.

NOTE: Do not mount the Rim directly to the Backboard. The strike plate on

the Backboard is not designed to hold the weight of the Rim, and will not be

able to support it. If you need to mount the Rim to the Backboard without

using a Pole system or Universal Bracket system, you must place a metal

support plate behind the Backboard. Failure to use a support plate will result

in damage to the Backboard. Support must also be provided at the top of

the Backboard using the Carriage Bolts in the slots as shown on Pages 4

and 5 in these instructions.

WARNING

The Rim and Backboard Combo kit must be mounted and

supported properly. Damage will occur if sufﬁcient Rim

support is not provided.

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that

Lifetime will not sell or provide your personal data to other third parties, or allow them to use your

personal data for their own purposes.

We invite you to read our privacy policy at www.lifetime.com

"U-JGFUJNFXFBSFDPNNJUUFEUPQSPWJEJOHJOOPWBUJWFBOERVBMJUZQSPEVDUT8IJMFSFHJTUFSJOHZPV

will have the opportunity to give us your feedback. Your input is valuable to us.

You can also opt-in to receive new product notiﬁcations or promotions.

In the unlikely event of a product recall or safety modiﬁcation, your registration provides the infor-

mation we need to notify you directly.

Registration is fast, easy, and completely voluntary.

NOTE: The Backboard Brackets shown are Lifetime Products®

models and are for illustration purposes only. If using Brackets

other than the Lifetime Products®models shown here, refer to the

instructions provided with the Brackets.

STEP 1A

Required for this page:

(4)

(2) OPTION 1 THIS OPTION IS FOR USE WITH BACKBOARD BRACKETS AND A U-BOLT.

ASSEMBLE THE U-BOLT (PROVIDED WITH THE BACKBOARD BRACKETS) TO THE BACKBOARD BRACKETS ACCORDING TO THE INSTRUCTIONS PROVIDED

IN THE POLE OR MOUNTING BRACKET UNIT.

If you have Backboard Brackets that come with a U-Bolt,

use Option 1 and the U-Bolt provided with the Brackets. If

the Backboard Brackets don’t include a U-Bolt, use Option

2 instead.

U-Bolt

Backboard

Brackets

Lay the Backboard (AB)

on a table or bench.

The U-Bolt (UB) goes

through the upper holes in

the Backboard.

Only hand tighten the Nuts (RH) now.

STEP 1B

RE RE RE

Slide the Carriage Bolt (RE) into

the crimped slot in each Back-

board channel.

Bend the Backboard Brackets out

so the lower holes go over the Car-

riage Bolts.

Do not overtighten these

Nuts.

LB RB

Completely tighten the Nuts (RH) from

Step 1A.

To ﬁnish the assembly, turn to Page 6

STEP 1C

1/2” Wrench

HD9136B

(2)

STEP 1A

Required for this page:

HD9136B

(2)

(4)

(2)

OPTION 2 THIS OPTION IS FOR ASSEMBLY WITHOUT A U-BOLT.

1/2” Wrench

NOTE: The Backboard Brackets shown are Lifetime Products®models

and are for illustration purposes only. If using Brackets other than

the Lifetime Products®models shown here, refer to the instructions

provided with the Brackets.

Lay the Backboard (AB) on a

table or bench.

The 5/16” x 5” Hex Bolts (RG)

go through the upper holes in the

Backboard.

Only hand tighten the Nuts (RH) now.

RE (2)

STEP 1B Slide the Carriage Bolt (RE)

into the crimped slot in each

Backboard channel.

RH RH

STEP 1C

To ﬁnish the assembly, turn to Page 6

Bend the Backboard Brackets

out so the lower holes go over

the Carriage Bolts. Do not overtighten these

Nuts (RH).

Completely tighten the Nuts

(RH) from Step 1A.

Required For This Page:

1/2” Wrench

3Turn the Backboard over so it faces up.

RH RH

Slide the Compression

Springs (RI) onto the legs

of the U-Bolt or Hex Bolts.

6Tighten the Nylock Flange Nuts

(RH) until the Rim is under the

desired tension.

RH (2)

RA (4)

HD9136B

Screwdriver

If the unit with the U-Bolt includes

Jam Nuts (pictured actual size

below) they are to be secured onto the ends

of the U-Bolt or Hex Bolts here.

RD (2) Fasten the Rim Cover Plate (AE)

to the Rim (AA) using the #7 x

3/8” Screws (RA).

1/2” Socket

Wrench

Use the 1/2” socket head from the

socket head wrench to press one

Push Nut (RD) onto one end of the Axle

(RJ).

Note: The Push Nut should rest about 1/4” from the end

of the Axle. If the Push Nut slips on too far, continue

sliding it to the other end of the Axle to remove it and try

again.

Slide the end of the Axle (RJ) through the Rim (AA) and the Rim Pivot Bracket (AH). Press the

Push Nut (RD) onto the end of the Axle. Use the 1/2” socket head to secure the Push Nut if

needed.

HH00700

Required for This Page:

FROM THIS POINT ON FOLLOW THE INSTRUCTIONS PROVIDED WITH THE POLE OR

MOUNTING UNIT.

NOTE: FAILURE TO PROVIDE ADEQUATE SUPPORT BEHIND THE BACKBOARD WILL VOID THE PRODUCT WARRANTY. FOLLOW ALL ASSEMBLY INSTRUCTIONS CAREFULLY.

Electric Drill

(10)

Remove the plastic ﬁlm from the Backboard.

The lip of the Frame Pad overlaps the front of the Backboard.

AF AG

Use an electric drill to insert the Screws.

Attach the Bottom Frame Pad (AG) ﬁrst.

Align the small line in the back of the Bottom Frame Pad with the seam in the Backboard frame.

Rear view

ACCESSORIES AVAILABLE FOR MORE BASKETBALL FUN!

PRODUCT DESCRIPTION MODEL #

Universal Extension Bracket 9594

Intermediate Size Basketball 594201

Ideal for mounting Backboard and Rim

sets to a pole, wall or roof. (Backboard

and Rim not included.)

Universal Extension Bracket #9594

To place orders, use a Master Card or Visa and call our Cus-

tomer Service Department or send check or money order to:

LIFETIME PRODUCTS, INC.

P.O. BOX 160010

BLDG. D-11, FREEPORT CENTER

CLEARFIELD, UT 84016-0010

Call the Customer Service Department

at the number on Page One for prices

and shipping costs.

If mounting the Backboard to a roof mount, wall

mount or existing pole mount that does not have

an extension provided, you must use a Mounting

Bracket Kit designed for this purpose. Lifetime

Products, Inc.®offers a Universal Extension

Bracket, Model #9594, through our Customer

Service Department. Figures A, B and C show the

Bracket mounted to a roof mount, a wall mount

and an existing pole mount. Please see below for

ordering information.

FIGURE C, EXISTING POLE MOUNTFIGURE B, WALL MOUNTFIGURE A, ROOF MOUNT

ROOF MOUNT, WALL MOUNT, EXISTING POLE MOUNT

LIFETIME BASKETBALL EQUIPMENT

5-YEAR LIMITED FACTORY WARRANTY

THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE.

1. Lifetime basketball systems are warranted to the original purchaser to be free from defects in material or workmanship for a period of

five years from the date of original retail purchase. The word “defects” is defined as imperfections that impair the use of the product.

Defects resulting from misuse, abuse or negligence will void this warranty. This warranty does not cover defects due to improper

installation, alteration or accident. This warranty does not cover damage caused by vandalism, rusting, “acts of nature” or any other

event beyond the control of the manufacturer.

2. This warranty is nontransferable and is expressly limited to the repair or replacement of defective basketball equipment. If the equipment

is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser. Shipping

charges to and from the factory are not covered and are the responsibility of the purchaser. Labor charges and related expenses for removal,

installation or replacement of the basketball system or its components are not covered under this warranty.

3. This warranty does not cover scratching or scuffing of the product that may result from normal usage. In addition, defects resulting from

intentional damage, negligence, unreasonable use or hanging from the net or rim will void this warranty.

4. Liability for incidental or consequential damages is excluded to the extent permitted by law. While every attempt is made to embody the highest

degree of safety in all equipment, freedom from injury cannot be guaranteed. The user assumes all risk of injury resulting from the use of this

product. All merchandise is sold on this condition, and no representative of the company may waive or change this policy.

5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional

or commercial use will void the warranty.

6. This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for use. Neither

Lifetime Products, Inc., nor any representative assumes any other liability in connection with this product.

ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A SALES RECEIPT.

REPORT PRODUCT DEFECTS IN WRITING TO:

Lifetime Products, Inc., PO Box 160010 Clearfield, UT 84016-0010

or call (800) 225-3865 M-F 8 a.m. to 5 p.m. MST.

Please include your dated sales receipt and photographs of damaged parts.

To Register Your Product, Visit Our Website at www.lifetime.com

Andere Handbücher für 73729

Inhaltsverzeichnis

Andere Lifetime Sport & Outdoor Handbücher

Lifetime

Lifetime QUICK ADJUST 90584 Bedienungsanleitung

Lifetime

Lifetime ACTION GRIP 71546 Bedienungsanleitung

Lifetime

Lifetime 73621 Bedienungsanleitung

Lifetime

Lifetime SPEED SHIFT 51544 Bedienungsanleitung

Lifetime

Lifetime ACTION GRIP 71799 Bedienungsanleitung

Lifetime

Lifetime 90022 Bedienungsanleitung

Lifetime

Lifetime 3241 Bedienungsanleitung

Lifetime

Lifetime 90689 Bedienungsanleitung

Lifetime

Lifetime 1306 Datenblatt

Lifetime

Lifetime STREAMLINE 90114 Bedienungsanleitung

Lifetime

Lifetime STREAMLINE 90114 Bedienungsanleitung

Lifetime

Lifetime STREAMLINE 91214 Bedienungsanleitung

Lifetime

Lifetime SPEED SHIFT 90812 Bedienungsanleitung

Lifetime

Lifetime VISTA Bedienungsanleitung

Lifetime

Lifetime QUICK ADJUST 90023 Bedienungsanleitung

Lifetime

Lifetime QUICK ADJUST 1479 Bedienungsanleitung

Lifetime

Lifetime MAMMOTH 90181 Bedienungsanleitung

Lifetime

Lifetime 90086 Bedienungsanleitung

Lifetime

Lifetime 71524 Bedienungsanleitung

Lifetime

Lifetime 0023 Kurzanleitung

Lifetime

Lifetime QUICK ADJUST 1531 Bedienungsanleitung

Lifetime

Lifetime STREAMLINE 90268 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 71286 Bedienungsanleitung

Lifetime

Lifetime PROCOURT 90690 Bedienungsanleitung

Beliebte Sport & Outdoor Handbücher anderer Marken

Flybar

Flybar POGO TRICK BOARD Bedienungsanleitung

Crivit

Crivit 93713 Bedienungsanleitung

Hudora

Hudora 76171 Montageanleitung

Axler

Axler GSU-1 Bedienungsanleitung

Aquaglide

Aquaglide FREEFALL 6 LANDING PAD Bedienungsanleitung

Cap Strength

Cap Strength POWER RACK FM-CS7000F Bedienungsanleitung

La Sportiva

La Sportiva RACE BORG Bedienungsanleitung

Crivit

Crivit 302640 Bedienungsanleitung

Sportime

Sportime Equalizer Bedienungsanleitung

T&R Sports

T&R Sports 5FT FOOSBALL TABLE Bedienungsanleitung

Salewa

Salewa VERT Bedienungsanleitung

KICK

KICK Decagon Bedienungsanleitung

byox

byox FJ-4.5FT Bedienungsanleitung

CHINESPORT Spa

CHINESPORT Spa 01325 Bedienungsanleitung

AXI.COM

AXI.COM ConesPro101 Bedienungsanleitung

Insportline

Insportline IN 2052 Bedienungsanleitung

Rugged Interactive

Rugged Interactive CardioWall Compact Kurzanleitung

N-FLATABLES

N-FLATABLES Belly Bouncer Fire Dog Bedienungsanleitung