Lifetime 73729 Bedienungsanleitung

TOOLS REQUIRED TABLE OF CONTENTS

Pour le français, voir la page 2. Para el español, ver la página 3.

ASSEMBLY INSTRUCTIONS

MODEL 73729

Save this instruction in the event that the manufacturer has

to be contacted for replacement parts.

CONTACT LIFETIME CUSTOMER SERVICE:

Call: 1-800-225-3865

7:00 am–5:00 pm (Monday–Friday) MST

and 9:00 am–1:00 pm Saturday MST

QUESTIONS? Model Number: 73729

Product ID:

For Customer Service in Mainland

Europe and the United Kingdom,

E-mail:[email protected]

Live Chat:

www.lifetime.com

Video Instructions:

www.youtube.com/lifetimeproducts

BACKBOARD & RIM

BASKETBALL SYSTEM

•Before you start

Decide where you would like to mount your system.

A mounting kit is required for Roof and Wall

mounts and is available through our Customer

Service Department (see page 9).

•Recruit friends and family

Assembly should take 2 people about 2–3

hours to complete.

Icon Legend................................2

Notices....................................2

Backboard to Rim Assembly.........3

Mounting the System................9

Registration........................10

Warranty................................11

(2) (1)

1/2” (13 mm)

(1)

3/8” (10 mm)

(1)

7/16” (11 mm)

Mounting Kit not included*

*Backboard Brackets (included with

the Lifetime® Universal Mounting

Kit, sold separately) are required to

complete the assembly as instructed

in this manual.

COPY

• Indicates the parts to be used for a section.

• Indicates special heed should be taken when reading.

• Indicates the hardware to be used for a section.

• Indicates the tools to be used for a section.

• Indicates no hardware required for a speciﬁc page.

• Indicates no parts required for a speciﬁc section.

• Indicates to use/not to use an electric drill for a speciﬁc step.

ICON LEGEND

• Indicates the use of a centerlock nut. A nut with this marking will require some effort to tighten.

This hardware was designed with this feature in order to prevent loosening later.

1190606 10/9/2018

WARNINGS & NOTICES

Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.

To ensure safety, do not attempt to assemble this product without following the instructions carefully. Check entire box and inside all packing

material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts using the hardware

identiﬁer and parts list in this document. Proper and complete assembly, use and supervision are essential for proper operation and to reduce the

risk of accident or injury. A high probability of serious injury exists if this product is not installed, maintained, and operated properly.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY.

Owner must ensure that all players know and follow these rules for safe operation of the system.

• If using a ladder during assembly, use extreme caution.

• Two capable adults are recommended for this operation.

• Minimum operational height is 6 ft 6 in (1.98m) to the bottom of the backboard.

SAFETY INSTRUCTIONS

COPY

BCS

Metal Parts

Hardware Bag

PARTS REQUIRED

HARDWARE REQUIRED

Plastic Parts

TOOLS REQUIRED

(2) (1)

(1)

1/2" (13 mm)

BACKBOARD TO RIM ASSEMBLY

ABC (x2)

ABK (x6)

AOW (x1)

ADP (x10)

AJI (x1)

ALX (x1)

ALD (x1)

AKZ (x1)

BAA (x1)

AJQ (x1)

BAB (x1)

BCU

AMA (x1)

AAQ (x2)

AAR (x2)

CYY (x2)

ABQ (x1)

25% of actual size

ADR (x4)

AAV (x2)

AJW (x2)

25% of actual size

AOU (x1)

25% of actual size

ABD (x2)

Hardware Bag

APY (x1)

(1)

TOOLS AND HARDWARE REQUIRED

XSECTION 1 (CONTINUED)

1.1 • Lay the backboard on a table or bench. Insert the U-Bolt (AOU) through the upper part of the opening on the backside

of the Backboard (AJI) as shown.

• Before beginning this assembly, follow the instructions included with your Mounting Kit

(or original basketball system if this is to replace an existing system) to assemble the

Backboard Brackets. To ensure a good ﬁt, use the U-Bolt (AOU) included with this system when

assembling the brackets.

For further details, see page 9.

AAR AAR

APY

• The Backboard Brackets shown here are

provided with the Mounting Kit (sold

separately) or with your original unit. The

actual Brackets may vary, but the assembly

steps still apply. See page 9 for more details.

1/2" (13 mm) (x2)

• Backboard Brackets are included in the

Mounting Kit (sold separately) and may

vary from those shown here.

AAR (x2)

AOU

ABK

ALD

AJI

• The Backboard Brackets shown represent Lifetime Products®

components and are for illustration purposes only. If using

Brackets other than the Lifetime Products®models shown here,

refer to the instructions provided with the Brackets.

ABK

ABK (x2)

AOU (x1)

25% of actual size

TOOLS AND HARDWARE REQUIRED

XSECTION 1 (CONTINUED)

1.2 • Slide a Carriage Bolt (ABC) into the crimped slot in each backboard channel.

1.3 • Bend the Backboard Brackets (not included) so the lower holes go over the Carriage Bolts. Lifetime®Backboard

Brackets are designed to be bent by hand. Secure the Brackets to the Carriage Bolts through the lower of the two holes

in the Bracket.

ABC (x2)

ABC

• The Backboard Brackets

shown here are not included

with this system.

ABK (x2)

ABK

1/2" (13 mm)

• The Backboard Brackets

shown here are not included

with this system.

TOOLS AND HARDWARE REQUIRED

XSECTION 1 (CONTINUED)

1.5 • Turn the backboard on its back and position the Rim (ALX) inside the Plastic Guard as shown. Slide the end of the

Axle (ABQ) through the Rim and the Rim Pivot Bracket (APY). Press the Push Nut (AAQ) onto the end of the Axle. Use the

1/2” (13 mm) socket head to secure the Push Nut if needed.

AAQ (x2)

1/2" (13 mm) (x2)

1.4 • Use the 1/2” socket head from the socket-head wrench to press one Push Nut (AAQ) onto one end of the Axle (ABQ).

• The Push Nut should rest about 1/4" from

the end of the Axle. If the Push Nut slips

on too far, continue sliding it to the other

end of the Axle to remove it and try again.

AAQ

ABQ

1/2" (13 mm) Socket Head

AAQ

ABQ

ALX

ABQ (x1)

25% of actual size

TOOLS AND HARDWARE REQUIRED

XSECTION 1 (CONTINUED)

1.6 • Thread the Jam Nuts (AAV) as far as they will go on the ends of the U-Bolt. Then slide the Springs (AJW) into place

and secure them with the hardware shown.

• DO NOT COMPLETELY TIGHTEN THE FLANGE NUTS

IN THIS STEP! Only tighten the Nuts until the Rim

does not wobble. Tightening the Nuts will adjust

the Rim tension.

ABK (x2)

AOW (x1)

25% of actual size

• Attach the Rim Cover Plate (AMA) to the Rim.

1.7

AJW (x2)

25% of actual size

AOW

ABK

AAV

AJW AJW

1/2" (13 mm) (x2)

ADR (x4)

ADR ADR

ADR

AMA

AAV (x2)

TOOLS AND HARDWARE REQUIRED

XSECTION 1 (CONTINUED)

ADP (x10)

AJI

ADP

AJQ

1.8 • Remove the plastic ﬁlm from the Backboard (AJI), and attach the Center Frame Pad (AJQ) to the Backboard in the location

shown with the hardware indicated. Make sure that the Center Frame Pad is oriented and centered on the metal piece of

the Backboard.

1.9

BAA

BAB

ADP

ADP ADP

ADP

• Attach the Corner Frame Pads (BAA and BAB) to the Backboard in the locations indicated with the hardware indicated.

1.10 • Attach the Net (AKZ) to the Rim.

AKZ

• If a replacement Net is needed, please call

our Customer Service Department. Our Nets

are shorter than average to reduce the risk of

entanglement.

FIG. A, ROOF MOUNT FIG. B, WALL MOUNT

MOUNTING KIT SOLD SEPARATELY

See details below.

FIG. C, EXISTING POLE MOUNT

MOUNTING THE SYSTEM

LIFETIME

• For mounting the Backboard & Rim Combo to a roof, wall, or existing pole mount that does not provide an extension,

you must use a Mounting Kit designed for this purpose. Lifetime Products offers a Universal Mounting Kit, Model #9594,

through our Customer Service Department. Figures A, B, and C show the Universal Extension Bracket mounted to a

roof, a wall, and an existing pole. An Adjustable Height Mounting Kit, Model #1044, is also available (ﬁgure D).

Please refer to the information at the bottom of this page for ordering information.

PRODUCT DESCRIPTION MODEL #

Universal Mounting Kit 9594

Adjustable Height Mounting Kit 1044

Call our Customer Service Department at 1.800.424.3865 for prices and shipping costs.

To place orders, use a Master Card or Visa and call our Customer Service Department, or send check or money

order to:

LIFETIME PRODUCTS, INC.

P.O. BOX 160010

BLDG. D-11, FREEPORT CENTER

CLEARFIELD, UT 84016-0010

• The Universal Mounting Kit and the

Adjustable Height Mounting Kit are not

included with this basketball system. See

details below to order the kit from our

Customer Service Department.

FIG. D, ADJUSTABLE HEIGHT MOUNTING KIT

The life of your basketball system depends on many variables. The climate, exposure to corrosives such as salt, pesticides, or herbicides,

and excessive use or misuse can all contribute to Pole failure, which may cause property damage or personal injury.

Check your basketball system frequently for loose hardware, excessive wear, and signs of corrosion. For safety reasons, and to

prolong the life of your basketball system, you must take the following preventive measures.

a. Check all Nuts and Bolts. If any are loose, tighten them.

b. Check all parts for excessive wear and tear. If necessary, replace any parts that have been worn or damaged through usage.

Contact our Customer Service Department for replacement parts.

c. Inspect the Warning Sticker on the Pole. If it is ripped, faded, or illegible, call our Customer Service Department to request

a replacement Sticker.

d. Check all Pole sections for visible rust or chipped or cracked paint. If either are present, do the following:

1. Use an emery cloth to completely remove any rust or chipped paint.

2. Clean the area with a damp cloth and allow it to dry.

3. Apply two coats of a rust preventative, high gloss enamel paint to the area. Allow the paint to dry between coats.

IF RUST HAS PENETRATED THROUGH THE POLE ANYWHERE, REPLACE IT IMMEDIATELY!

MAINTENANCE / ENTRETIEN / MANTENIMIENTO

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

At Lifetime®, we are committed to providing innovative and quality products. While registering, you will have the opportunity to give us your feedback. Your input is

valuable to us.

• You can also opt in to receive new product notiﬁcations or promotions.

• In the unlikely event of a product recall or safety modiﬁcation, your registration provides the information we need to notify you directly.

• Registration is fast, easy, and completely voluntary.

Maintaining your privacy is our long-standing policy at Lifetime®. And you can rest assured that Lifetime®will not sell or provide your

personal data to other third parties, or allow them to use your personal data for their own purposes.

Andere Handbücher für 73729

Inhaltsverzeichnis

Andere Lifetime Sport & Outdoor Handbücher

Lifetime

Lifetime POOLSIDE 90742 Bedienungsanleitung

Lifetime

Lifetime 90703 Bedienungsanleitung

Lifetime

Lifetime COMPETITION Series XL POWER LIFT 71525 Bedienungsanleitung

Lifetime

Lifetime 90056 Bedienungsanleitung

Lifetime

Lifetime STREAMLINE BASKETBALL SYSTEM Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 90231 Bedienungsanleitung

Lifetime

Lifetime 71526 Kurzanleitung

Lifetime

Lifetime 12347 Bedienungsanleitung

Lifetime

Lifetime QUICK ADJUST 91113 Bedienungsanleitung

Lifetime

Lifetime SPEED SHIFT Bedienungsanleitung

Lifetime

Lifetime 60429 Bedienungsanleitung

Lifetime

Lifetime PROCOURT 91329 Bedienungsanleitung

Lifetime

Lifetime 60045 Bedienungsanleitung

Lifetime

Lifetime 3241 Bedienungsanleitung

Lifetime

Lifetime 60348 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 90698 Bedienungsanleitung

Lifetime

Lifetime STREAMLINE 1268 Bedienungsanleitung

Lifetime

Lifetime STRONG ARM 90491 Bedienungsanleitung

Lifetime

Lifetime SPEED SHIFT 90000 Bedienungsanleitung

Lifetime

Lifetime 12347 Bedienungsanleitung

Lifetime

Lifetime 90230 Bedienungsanleitung

Lifetime

Lifetime 5820 Kurzanleitung

Lifetime

Lifetime SPEED SHIFT 90492 Bedienungsanleitung

Lifetime

Lifetime PUMP ADJUST 90487 Bedienungsanleitung

Beliebte Sport & Outdoor Handbücher anderer Marken

Flybar

Flybar POGO TRICK BOARD Bedienungsanleitung

Crivit

Crivit 93713 Bedienungsanleitung

Hudora

Hudora 76171 Montageanleitung

Axler

Axler GSU-1 Bedienungsanleitung

Aquaglide

Aquaglide FREEFALL 6 LANDING PAD Bedienungsanleitung

Cap Strength

Cap Strength POWER RACK FM-CS7000F Bedienungsanleitung

La Sportiva

La Sportiva RACE BORG Bedienungsanleitung

Crivit

Crivit 302640 Bedienungsanleitung

Sportime

Sportime Equalizer Bedienungsanleitung

T&R Sports

T&R Sports 5FT FOOSBALL TABLE Bedienungsanleitung

Salewa

Salewa VERT Bedienungsanleitung

KICK

KICK Decagon Bedienungsanleitung

byox

byox FJ-4.5FT Bedienungsanleitung

CHINESPORT Spa

CHINESPORT Spa 01325 Bedienungsanleitung

AXI.COM

AXI.COM ConesPro101 Bedienungsanleitung

Insportline

Insportline IN 2052 Bedienungsanleitung

Rugged Interactive

Rugged Interactive CardioWall Compact Kurzanleitung

N-FLATABLES

N-FLATABLES Belly Bouncer Fire Dog Bedienungsanleitung