LIGHTEL Technologies ViewConn Pro VC-8200 Bedienungsanleitung
ViewConn®Pro
VC-8200
1. Introducing ViewConn
2. Using ViewConn Pro
3. Optional Integrated
Optical Power Meter
4. Specifications
Safety
Fiber optic lasers use light wavelengths not
visible to the human eye.
All Lightel microscopes are eye-safe video microscopes.
Nevertheless, all standard safety precautions should be
followed.
Inspect at Every Step
Manufacturing
QC and Receiving
System Assembly
Installation
System Testing
Network Testing
Maintenance
Troubleshooting
ViewConn was the first, and only, hand-held, all-in-
one inspection and cleaning device.
ViewConn’s integrated operation allows users to quickly and
easily inspect, clean and reinspect, ensuring connectors are truly
clean prior to mating.
ViewConn’s large 3.5”display provides clear, sharp images.
Introducing ViewConn
The ViewConn Plus dual
microscope design, originated
by Lightel, lets you easily
inspect both male and female
mated connector pairs
without the time consuming
need to change tips.
Introducing ViewConnPlus
Save Time
ViewConn Pro is an integrated system for
fiberoptic connector inspection, evaluation,
documentation and cleaning. This hand-held tool
provides dual microscopes, touchscreen controls,
Pass/Fail analysis and a cleaning cassette all in a
single unit.
Introducing ViewConnPro
The
Comprehensive
Solution
ViewConnPro
VC-8200
12
1. ViewConn adapter tip (INT)
2. ViewConn focus knob (INT)
3. Cursor touch pad
4. Left-click button
5. Right-click button
6. Wrist strap
7. 5” color touchscreen
8. Stylus and stylus holder
9. Power button
10. Probe focus knob (EXT)
11. CC-1 cleaning cassette
12. USB port
13. Ruggedized cover
14. Optional integrated power meter
1
2
3
4
6
5
10
9
7
8
14
11
13
ViewConnPro
ViewConn Pro is designed to fit
your work style.
With a fold out stand, a wrist strap for
support when holding it and neck strap
attachments at either top or bottom,
ViewConn Pro gives you the flexibility to
use it whatever way the job requires.
Its Li-Ion battery begins to recharge
automatically whenever it is attached to
an AC outlet.
When you turn ViewConn Pro on it will be set
to inspect male connectors (patchcords and
jumpers) ─the INT setting.
Use the large black ViewConn focus knob to
focus the image. If you are unable to focus
the image, verify that the tip is fully screwed
in and the connector is properly seated in the
tip.
Inspecting Male Connectors
Ensure that you have the proper tip in the
tip receptacle at the top of ViewConn,
then place the connector into the tip.
from the top down on a clean section of
the CC-1 cassette. Do not scrub the
connector back and forth and do not
reuse a section of cleaner. Reinsert the
connector in the tip to verify that it is
now clean.
If clean, make sure that the mated
connector is also clean, before installing
or reinstalling.
If the connector was not clean, repeat
the procedure and again recheck.
Cleaning Male Connectors
Once you have inspected
the fiber, if you need to
clean it, open the cover
of the CC-1 cleaning
cassette, and, using
moderate pressure swipe
the connector ferrule
Inhaltsverzeichnis
Andere LIGHTEL Technologies Analytisches Instrument Handbücher
