LINK-MI LM-MSW1 Bedienungsanleitung
- 0 -
HD Video 180°
Rotation controller
LM-MSW1
User Manual
For the safety of you and equipment, please read the safety
instructions carefully before using this equipment. If you have any
queries in use, please read the instructions first. A detailed
description of device operation is provided in the main body. If
there is still doubt, please contact us. W e w il l gi v e yo u a
satisfactory reply as soon as possible.
If there is any change in the instruction manual, without prior
notice, please understand.
- 1 -
Catalog
1、Installation instructions ………………………………………… 2
2、Product overview …………………………………………………… 4
3、Front and back panel introduction ………………………………… 6
4、Introduction of remote control operation ………………………… 7
5、Menu introduction ………………………………………………… 8
6、Introduction to USB operation …………………………………… 10
7、control protocol ………………………………………………… 13
- 2 -
Chapter 1. Installation instructions
1
Power adapter
This equipment supports 12V DC input. In order to make the
equipment work properly, please do not replace our standard
power adapter easily.
2
Power
off
Turn off all the power supply, unplug the power plug, etc.
to ensure the safety of you and the equipment.
3
Cables
It is not possible to place objects on power lines, signal
lines, communication lines and other cables. Cables should
be avoided from being trampled or squeezed to prevent
leakage or short circuit.
4
Signal cables
When the sig nal line is i nsert ed or pulled from the
equipment, the equipment needs to be cut off so as not to
damage the equipment. If not,The damage is not in warranty
5
Heat dissipating
hole
Th ere may be op eni ngs on the o utsi de su rfac e of the
equipment for heat dissipation. Do not block these openings
to avoid heat accumulation, damage to the equipment or
cause fire hazards.
6
Equipment
placement
Equipment should be reasonably placed, such as standard
rack, chassis, cabinet, or placed on a stable and flat work
table to prevent equipment from falling.
7
Environment
The environment of equipment should pay attention to dust
proof and moisture proof, especially prevent liquid from
soaking and splashing into the equipment.
8
Repair
All m ain tena nce work s hou ld be done by prof essio nal
maintenance personnel. Do not attempt to repair equipment
without training. To avoid the danger of electric shock, do
not unlock the case.
9
Safety
precautions
1 . t h e r e i s e l e c t r i c i t y i n s i d e t h e e q u i p m e n t , n o n
professional maintenance personnel shall not open the
chassis, in order to avoid any danger.
2.strictly prohibit water droplet or water splashing,
strictly prohibit putting any liquid container container
on the equipment.
3.in order to prevent fire, the equipment should not be
near the fire source.
4.in order to fully ventilate, the front and back panels of
the equipment should maintain at least 20CM gap.
5.If the equipment makes strange noise, smoke or odor, the
- 3 -
power plug should be unplugged immediately and handled by
professional maintenance personnel.
6.in case of thunder or long absence, please unplug the
power supply.
7.do not plug any object from the ventilation hole of the
equipment, so as to avoid damage to the equipment or
electric shock.
8.it is not suitable to place this equipment in near water
or other damp places.
9.it is not suitable to place this equipment near heat sink
or other high temperature places.
10. please properly arrange the power cord to prevent
breakage.
11.under the following circumstances, the power plug of
th i s eq u ip me n t sh ou l d b e r em ov ed a n d h an d le d by
professional maintenance personnel.
1) when the plug power cord is damaged or worn;
2) when liquid splashes into the equipment.
3) when the equipment falls or the chassis is damaged.
4) when the equipment has obvious functional abnormalities
or performance changes;
5) Regularly check whether the fan is working properly, if
the fan is not working, it should be immediately unplugged
and switched off the power supply of the equipment, handled
by professionals.
This equipment is not suitable for non professionals to operate and debug. Users
must receive professional training and guidance.
- 4 -
Chapter 2. Product overview
The device is a multi-functional image processor, a single
device can complete multiple signal switching and format conversion,
video 180 degree rotation, USB decode audio and video functions. The
product supports 1 channel AV, 1 channel VGA, 1 channel HDMI, 1
channel USB input, 1 channel HDMI and 1 channel independent audio
output. The input and output signals can support full HD 1920 * 1080
@60HZ. At the same time, all input signals of the product can support
synchronous switching between images and audio.
2.1 Feauter
1. Maximum support for full HD 1080P input and output;
2. Support HDMI\VGA\AV\USB input and build in scaler inside.
3, support all signal source to turn 180 degrees;
4. Output resolution is 1080P, 720P and 768P optional.
5, the output type has HDMI and DVI optional, compatible with HDMI
and DVI interface display device;
6, output with long line drive function, the farthest can transmitm
more then 10 meters.
- 5 -
2.2 Technical parameter
Name
Specifications
Input signal
VGA signal
DB15 interface,Binding 1 channel 3.5 audio interface;
Support 640x480@85Hz to 1920x1200@60Hz.
HDMI signal
HDMI1.3(HDCP1.2) compatible DVI1.0
AV signal
Automatic recognition of NTSC, PAL and SECAM systems
USB
Standard USB2.0 interface, which can decode audio and
video.
Support video, picture, MP3, TXT;
Streaming media format support: Mpeg1, 2, 4 (1920 *
1080 @30P and below) / Divx, Xvid (1920 * 1080 @30P and
below) / RM, RMVB (1920 * 1080 @25P and below) / H.264
(1920 * 1080 @30P and below) / VC-1 (1920 * 1080 @30P
and below) / MJPEG (640 * 480 @30P).
Output signal
HDMI output
1cahannel HDMI output，support HDMI1.3 and DVI1.0(option)
HDMI resolution
1920x1080@60Hz、1280x720@60Hz、1024x768@60Hz
Audio output
3.5 audio interface, left and right channel stereo
audio
Other
Control
Remote control, RS-232 serial port
Power Supply
DC12V
Power waste
10W
Size
Dimension
238mm(L)x130mm(D)x27mm（H）
Weight
0.65Kg
- 6 -
2.3 Product topological graph
- 7 -
③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
① ②
⑪
⑫ ⑬
Chapter 3. Front and back panel introduction
①
DC 12V input
②
RS232 port
③
USB interface
④
HDMI input
⑤
VGA input
⑥
CVBS input
⑦
Left audio input
⑧
Right audio input
⑨
VGA audio input
⑩
Stereo audio
⑪
HDMI output
⑫
Power light（green light is
work,red light is standby）
⑬
Remote control receiver
- 8 -
Chapter 4. Introduction of remote control operation
- 9 -
Picture Mode
Color Temperature
Aspect Ratio
Noise Reduction
Screen
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
PICTURE OPTION TIME SOUND
OSD Language English
Restore Factory Default
MIRROR
Out Mode 1080P60
Out Type HDMI
Sound Mode
Balance
Auto Volume
Surround Sound
SPDIF MODE PCM
Chapter 5. Menu introduction
1. Picture mode
1.1 picture mode ：standard,mild,user,dynamic.Users can set their
favorite mode according to their own preferences. The factory is set
as a standard, and User changes are not recommended;
1.2 color temperature：medium,warm,user,cool.The factory is set as a
medium, and User changes are not recommended;
1.3 aspect ratio: 0-20 optional.Users can zoom in the size of the
video screen.
1.4 noise reduction middle: off,low,middle,high,default optional,The
factory is set as a middle, and User changes are not recommended;
1.5 Screen: no use;
1.6 Color Range: 0~255 and 16~235 optional,Professional users can
choose settings.
Inhaltsverzeichnis
Andere LINK-MI Controller Handbücher
LINK-MI
LINK-MI LM-TV06 Bedienungsanleitung
LINK-MI
LINK-MI LM-TV16 Bedienungsanleitung
LINK-MI
LINK-MI LM-TV25 Bedienungsanleitung
LINK-MI
LINK-MI LM-TV04S Bedienungsanleitung
LINK-MI
LINK-MI LM-TV21 Bedienungsanleitung
LINK-MI
LINK-MI LM-TV02-4K2K Bedienungsanleitung
LINK-MI
LINK-MI LM-TV04-4K2K Bedienungsanleitung
LINK-MI
LINK-MI LM-TV12 Bedienungsanleitung
LINK-MI
LINK-MI LM-TV04M Bedienungsanleitung
LINK-MI
LINK-MI LM-TV24 Bedienungsanleitung
LINK-MI
LINK-MI LM-R90U Bedienungsanleitung
LINK-MI
LINK-MI LM-TV12-4K2K Bedienungsanleitung
LINK-MI
LINK-MI LM-TV08P Bedienungsanleitung
LINK-MI
LINK-MI LM-TV09S Bedienungsanleitung
LINK-MI
LINK-MI LM-TV03-4K2K Bedienungsanleitung
LINK-MI
LINK-MI LM-TV08 Bedienungsanleitung
LINK-MI
LINK-MI LM-TV09-4K2K Bedienungsanleitung
LINK-MI
LINK-MI LM-TV06-4K2K Bedienungsanleitung
LINK-MI
LINK-MI LM-TV08-4K2K Bedienungsanleitung
LINK-MI
LINK-MI LM-TV09M Bedienungsanleitung
