Linksys RT31P2-VU Original Betriebsanleitung
A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
RT31P2-VU
with 2 Phone Ports
Broadband Router
Package Contents
• Broadband Router with 2 Phone Ports
• Power Adapter
• Setup Wizard CD-ROM with Norton Internet Security
• Installation and Troubleshooting Guide
•NetworkCable
• Telephone Jack Adapter
• Quick Installation
DIf you have a second phone
line, repeat step C to connect
a telephone or fax machine to
the Router’s PHONE 2 port.
EConnect your cable or DSL
modem’s Ethernet cable to
the Router’s Internet port. (If
your modem only provides a
USB output, then you will need
to upgrade your modem.)
FPower on the cable or DSL
modem.
GConnect the included power
adapter to the Router’s Power
port, and then plug the power
adapter into an electrical
outlet.
The Power LED on the front
panel will light up as soon as
the power adapter is
connected properly.
HPower on the PC you wish to
use to configure the Router.
2
In Step 2, you will need the setup
instructions provided by your Internet
Service Provider (ISP). If you do not
have this information, then contact
your ISP before proceeding.
The instructions from your ISP tell you
how to set up your PC for Internet
access. Because you are now using
the Router to share Internet access
among several computers, you will
use the setup information to
configure the Router instead of
your PC.
AOpen your PC’s web browser.
Enter http://192.168.15.1 (the
Router’s default local IP
address) in the web browser’s
Address field. Then press the
Enter key.
BA screen will appear and ask
you for a User Name and
Password. Enter admin (the
default) in the User Name and
Password fields. (Later you
should set a new password
using the Administration tab’s
Management screen. This will
help secure access to the
Web-based Utility.)
Then click the OK button.
B
A
AMake sure that all of your
hardware is powered off,
including the Router, PCs, and
cable or DSL modem.
BConnect one end of an
Ethernet network cable to one
of the numbered ports on the
back of the Router. Connect
the other end to an Ethernet
port on a network device, e.g.,
a PC, print server, or switch.
Repeat this step to connect
more PCs or other network
devices to the Router.
CIf necessary, disconnect the
telephone cable from the
telephone wall jack and
connect that end to the
telephone jack adapter. Then
connect the adapter to the
Router’s PHONE 1 port.
NOTE: Make sure your PC’s
Ethernet adapter is set to obtain
an IP address automatically. For
more information, refer to
Windows Help.
C
B
There are two ways to configure the Router. Choose one of the following:
• Run the Setup CD-ROM - It is strongly recommended that you use the
Setup CD-ROM. Insert the Setup CD-ROM into the CD-ROM drive, and
follow the on-screen instructions.
•Use this Quick Installation guide - If you wish, you can use the Router’s
Web-based Utility. Proceed to Step 1 of this Quick Installation.
1Connect the Router
Configure the Router
E
G
NOTE: Makesureyourtelephone
is set to its tone setting (not
pulse).
VoIP
VoIP
cIn the DNS 1-3 fields, enter the
DNS address(es) provided by
your ISP. You need to enter at
least one DNS address.
dClick the Save Settings button.
3 PPPoE
aIf your ISP says that you are
connecting through PPPoE or if
you normally enter a user
name and password to access
the Internet, then select PPPoE
as the Internet Connection
Type.
bEnter the User Name and
Password provided by your ISP.
(Also enter the Service Name, if
required.)
cSelect Keep Alive if you always
want to be connected to your
ISP, or select Connect on
Demand if you are charged
for the time that you are
connected to your ISP.
dClick the Save Settings button.
eClick the Status tab and then
the Router tab. Click the
Connect button to start the
connection.
CThe Router’s Web-based Utility
will appear with the Basic Setup
screen showing.
DFor the Internet Connection
Type setting, six Internet
connection types are offered
through the drop-down menu.
Depending on which
connection type you select,
the features available on the
Basic Setup screen will differ.
Proceed to the instructions for
the connection type you are
using.
1 Obtain an IP Automatically
(DHCP)
aIf your ISP says that you are
connecting through DHCP or a
dynamic IP address from your
ISP, then select Obtain an IP
automatically as the Internet
Connection Type.
bClick the Save Settings button.
2 Static IP
aIf your ISP says that you are
connecting through a static or
fixed IP address from your ISP,
then select Static IP as the
Internet Connection Type.
bEnter the IP Address, Subnet
Mask, and Gateway Address
provided by your ISP.
ITo test the Router’s settings,
open your web browser from
any computer. In the browser’s
Address field, enter
www.linksys.com and press the
Enter key.
Congratulations! The installation of
the Router is complete.
4PPTP
PPTP is a service used in Europe and
Israel only. If you are using a PPTP
connection, check with your ISP for
the necessary setup information.
5 RAS
RAS is a service used in Singapore
only. If you are using a RAS
connection, check with your ISP for
the necessary setup information.
6 Heart Beat Signal
Heart Beat Signal is a service used in
Australia only. If you are using a Heart
Beat Signal connection, check with
your ISP for the necessary setup
information.
EIf requested by your ISP (usually
cable ISPs), complete the Host
Name and Domain Name
fields. Otherwise, leave them
blank.
FIf you haven’t already done so,
click the Save Settings button.
Then close the web browser.
GPower your cable or DSL
modem off and back on
again.
HRestart or power on your PCs so
they can obtain the Router’s
new settings.
RT31P2-VU-QI-41215A JL
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
Model No.
PPPoE
PPTP
Heart Beat Signal
I
Obtain an IP
Static IP
Automatically
RAS
For additional information or troubleshooting
help, refer to the Installation and
Troubleshooting Guide on the CD-ROM. You
can also call or e-mail for further support.
Website
http://www.linksys.com
Support
Andere Linksys Netzwerk-Router Handbücher
Linksys
Linksys BEFSR41 - EtherFast Cable/DSL Router Bedienungsanleitung
Linksys
Linksys EA5800 Bedienungsanleitung
Linksys
Linksys BEFSR41W Bedienungsanleitung
Linksys
Linksys WET11 - Instant Wireless EN Bridge Network... Bedienungsanleitung
Linksys
Linksys VELOP Bedienungsanleitung
Linksys
Linksys RVL200 Bedienungsanleitung
Linksys
Linksys WRT160N - Wireless-N Broadband Router... Kurzanleitung
Linksys
Linksys BEFSR81 - EtherFast Cable/DSL Router Bedienungsanleitung
Linksys
Linksys WT54GV22 Bedienungsanleitung
Linksys
Linksys WET54Gv2 Bedienungsanleitung
Linksys
Linksys Instant PowerLine PLEBR10 Bedienungsanleitung
Linksys
Linksys FGW5500 Bedienungsanleitung
Linksys
Linksys AM300 Bedienungsanleitung
Linksys
Linksys RV082 Bedienungsanleitung
Linksys
Linksys Instant PowerLine PLEBR10 Bedienungsanleitung
Linksys
Linksys RVL200 Bedienungsanleitung
Linksys
Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Original Betriebsanleitung
Linksys
Linksys EtherFast EF3124 Bedienungsanleitung
Linksys
Linksys RV0041 - 10/100/1000 VPN Router Bedienungsanleitung
Linksys
Linksys AC5400 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise