Linksys BEFSR81 - EtherFast Cable/DSL Router Original Betriebsanleitung

Model No.

Quick Installation

A Division of Cisco Systems, Inc.

Model No.

WIRED

BEFSR81

with 8-Port Switch

Cable/DSL Router

Package Contents

• Cable/DSL Router

• Setup CD-ROM with User Guide

• Category 5 Ethernet Network Cable

• Quick Installation

• Registration Card

Linksys highly recommends that you

use the Setup CD-ROM to install the

Cable/DSL Router with 8-Port Switch.

However, if you prefer to install the

Router manually, then follow the

instructions in this Quick Installation.

AMake sure all devices, includ-

ing your PCs, modem, and

Router, are powered down.

BIf you haven’t already done so,

connect your cable or DSL

modem to its proper connec-

tion—the coaxial jack for

cable or the phone jack for

DSL. Follow the instructions from

your cable or DSL modem’s

installation guide.

CUsing an Ethernet network

cable, connect the LAN or

Ethernet network port of the

cable or DSL modem to the

Router’s Internet port.

DConnect an Ethernet network

cable to your PC’s Ethernet

network adapter.

EConnect the other end to one

of the Router’s Ethernet ports.

Connect the Router

In Step 3, you will need the setup

instructions provided by your Inter-

net Service Provider (ISP). If you do

not have this information, then con-

tact your ISP before proceeding.

The instructions from your ISP tell you

how to set up your PC for Internet

access. Because you are now using

the Router to share Internet access

among several computers, you will

use the setup information to config-

ure the Router instead of your PC.

AOpen your PC’s web browser.

Enter http://192.168.1.1 (the

Router’s default local IP

address) in the web browser’s

Address field. Then press the

Enter key.

BA screen will appear and ask

you for a User Name and Pass-

word. Leave the User Name

field empty, and enter admin

(the default) in the Password

field. Then click the OK button.

CThe Router’s Web-based Utility

will appear with the Basic Setup

screen showing.

Configure the Router

FRepeat Steps D and E for every

PC you wish to connect to the

Router.

If you are connecting more

than eight PCs to the Router,

then you will need to connect

a hub or switch to any of the

Router’s Ethernet ports.

GPower on the cable or DSL

modem, and power on the PC

you wish to use to configure

the Router.

HConnect the included power

adapter to the Router.

IConnect the other end of the

adapter to an electrical outlet.

EtherFast

NOTE:: Make sure your PC’s Ethernet

adapter is set to obtain an IP address

automatically. For more information,

refer to Windows Help.

cIn the Primary and Secondary

DNS fields, enter the DNS

address(es) provided by your

ISP. You need to enter at least

one DNS address.

dClick the Save Settings button,

and go to Step F.

3 PPPoE

aIf your ISP says that you are

connecting through PPPoE or if

you normally enter a user

name and password to access

the Internet, then select PPPoE

as the Internet Connection

Type.

bEnter the User Name and Pass-

word provided by your ISP.

cClick the Save Settings button.

dClick the Status tab, and then

click the Connect button to

start the connection.

eGo to Step F.

4 RAS

RAS is a service used in Singapore

only. If you are using a RAS connec-

tion, check with your ISP for the nec-

essary setup information. When you

are finished, go to Step F.

DIn its drop-down menu, the

Internet Connection Type set-

ting features six Internet con-

nection types: obtain an IP

automatically (DHCP), Static IP,

PPPoE, RAS, PPTP, and Heart

Beat Signal. Depending on

which connection type you

select, the features available

on the Basic Setup screen will

differ. Proceed to the instruc-

tions for the connection type

you are using.

1 Obtain an IP Automatically

(DHCP)

aIf your ISP says that you are

connecting through DHCP or a

dynamic IP address from your

ISP, then select Obtain an IP

automatically as the Internet

Connection Type.

bClick the Save Settings button,

and go to Step F.

2 Static IP

aIf your ISP says that you are

connecting through a static or

fixed IP address from your ISP,

then select Static IP as the

Internet Connection Type.

bEnter the IP Address, Subnet

Mask and Default Gateway

address provided by your ISP.

JTo test the Router’s settings,

open your web browser from

any computer. In the browser’s

Address field, enter

www.linksys.com/registration

and press the Enter key.

Congratulations! The installation of

the Router is complete.

5PPTP

PPTP is a service used in Europe and

Israel only. IF you are using a PPTP

connection, check with your ISP for

the necessary setup information.

When you are finished, go to Step F.

6 Heart Beat Signal

Heart Beat Signal is a service used in

Australia only. If you are using a Heart

Beat Signal connection, check with

your ISP for the necessary setup infor-

mation. When you are finished, go to

Step F.

FDepending on the setup infor-

mation from your ISP, you may

need to provide a host name

and domain name for the

Router. The Host Name and

Domain Name fields are usu-

ally left blank. If requested by

your ISP (usually cable ISPs),

complete these two fields.

GIf you haven’t already done so,

click the Save Settings button.

Then close the web browser.

HPower your cable or DSL

modem off and back on

again.

IRestart or power on your PCs so

they can obtain the Router’s

new settings.

BEFSR81_V3-QI-30731NC JL

For additional information or troubleshooting

help, refer to the User Guide on the Setup CD-

ROM. You can also call or e-mail for further

support.

24-hour Technical Support

800-326-7114

(toll-free from US or Canada)

E-mail Support

[email protected]

Website

http://www.linksys.com or

http://support.linksys.com

RMA (Return Merchandise Authorization)

http://www.linksys.com/support

FTP Site

ftp://ftp.linksys.com

Sales Information

800-546-5797 (800-LINKSYS)

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Model No.

Andere Handbücher für BEFSR81 - EtherFast Cable/DSL Router

Inhaltsverzeichnis

Andere Linksys Netzwerk-Router Handbücher

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Bedienungsanleitung

Linksys

Linksys X2000 Bedienungsanleitung

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router Leitfaden

Linksys

Linksys WRVS4400N - Small Business Wireless-N Gigabit Security... Bedienungsanleitung

Linksys

Linksys E56000 Bedienungsanleitung

Linksys

Linksys XAC-Series XAC1900 Bedienungsanleitung

Linksys

Linksys WRT160N - Wireless-N Broadband Router... Kurzanleitung

Linksys

Linksys BEFN2PS4 - EtherFast Cable/DSL And Voice... Original Betriebsanleitung

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Bedienungsanleitung

Linksys

Linksys WRT100 - RangePlus Wireless Router Bedienungsanleitung

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Bedienungsanleitung

Linksys

Linksys Etherfast Bedienungsanleitung

Linksys

Linksys Velop MX4000 Series Bedienungsanleitung

Linksys

Linksys R74 Bedienungsanleitung

Linksys

Linksys MAX-STREAM Bedienungsanleitung

Linksys

Linksys WRT3200ACM Bedienungsanleitung

Linksys

Linksys EA9200 Bedienungsanleitung

Linksys

Linksys BEFSR81 - EtherFast Cable/DSL Router Bedienungsanleitung

Linksys

Linksys WET54G - Wireless-G EN Bridge Bedienungsanleitung

Linksys

Linksys HomeLink HPB200 Bedienungsanleitung

Linksys

Linksys AM300 Bedienungsanleitung

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Bedienungsanleitung

Linksys

Linksys LRT214 Bedienungsanleitung

Linksys

Linksys SLM2008 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise