Linksys RV042 Bedienungsanleitung

LinkSys RV042 Router Installation Instructions

Part 1 | Basic Configuration of Your Broadband VPN

Router

Before you attempt to log into the web-based Administration, please verify the following.

1. Your browser is configured properly (see below).

2. Disable any firewall or security software that may be running.

3. Confirm that you have a good link LED where your computer is plugged into the Router.

If you don’t have a link light, then try another cable until you get a good link.

1.1 | Browser Configuration

Confirm your browser is configured for a direct connection to the Internet using the Ethernet

cable that is installed in the computer. This is configured through the options/preference section

of your browser.

You will also need to verify that the HTTP Proxy feature of your web browser is disabled. This is

so that your web browser will be able to view the Router configuration pages. The following

steps are for Internet Explorer and for Netscape. Determine which browser you use and follow

the appropriate steps.

Internet Explorer 5 or above (For Windows)

1. Open Internet Explorer. Click Tools, and then select Internet Options.

2. In the Internet Options window, click the Connections tab.

3. Click the LAN Settings button.

4. Clear the “Use a proxy server for your LAN” checkbox and click OK to save these LAN

settings changes.

5. Click OK again to close the Internet Options window.

Netscape 7.2 or Mozilla

1. Open the Netscape browser.

2. Click the Edit drop down menu and select Preferences.

3. Double click to expand the “advanced” option on the preference category list.

4. Click Proxies.

5. Click the radio button “Direct Connection to the Internet”.

6. Click OK to save.

1

1.2 | Web Management

To access the Router’s management interface, enter the Router IP address in your web browser

http://192.168.1.1.

To log on as an administrator, enter the system password (the default User Name is admin and

the default Password is admin) and click the OK button. If you typed the password correctly, the

left panel of the Web user interface changes to the administrator configuration mode as shown in

the following figures.

2

1.3 | Setup Wizard

Note: Select “Setup Wizard at the top center of the navigation panel in order to start you

through the basic configuration screens.

3

1.4 | Basic Setup

The first thing you need to complete is the Basic setup for the WAN parameters. Please click on

the “Launch Now” button to start this process.

4

1.5 This screen is for informational purposes only. Please select “Next>>” to proceed.

5

1.6 Enter Host Name and Domain Name only if required by the ISP. Click on “Next>>” to

proceed.

6

1.7 Select the WAN connection type for the primary connection to your ISP.

7

1.8 Obtain IP Automatically (For WAN 1)

If you selected this option it will allow the router to receive a Dynamic IP address from the ISP. If

necessary you may place DNS addressing here that will be used by the workstations. Click

“Next>>” to proceed.

8

1.9 Static IP (For WAN 1)

If you selected this option this will allow you to assign a fixed (static) IP address. This address

will be provided by your ISP. Enter the assigned IP address, Subnet Mask and Default Gateway

IP address. Click “Next>>” in order to proceed.

Please note that these addresses are only an example. Your addresses will be

provided by your ISP.

9

1.10 DNS Server settings (For WAN 1)

This will be only for Static IP entries. These addresses will be provided by your ISP.

10

Andere Handbücher für RV042

3

Inhaltsverzeichnis

Andere Linksys Netzwerk-Router Handbücher

Linksys

Linksys RT31P2-VU Original Betriebsanleitung

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Bedienungsanleitung

Linksys

Linksys BEPSR11 Bedienungsanleitung

Linksys

Linksys MAX-STREAM EA7500 Bedienungsanleitung

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router Bedienungsanleitung

Linksys

Linksys NR041 Original Betriebsanleitung

Linksys

Linksys WET54G V3 Bedienungsanleitung

Linksys

Linksys WET54GS5 - Wireless-G EN Bridge Bedienungsanleitung

Linksys

Linksys PC22604 - ProConnect II 2604 Switch Bedienungsanleitung

Linksys

Linksys EA8500 Bedienungsanleitung

Linksys

Linksys R 72 Bedienungsanleitung

Linksys

Linksys MR2000 Series Bedienungsanleitung

Linksys

Linksys Velop WHW03 Bedienungsanleitung

Linksys

Linksys Velop MX4000 Series Montage- und Wartungsanleitung

Linksys

Linksys Instant Broadband Series Bedienungsanleitung

Linksys

Linksys MAX-STREAM EA8300 Bedienungsanleitung

Linksys

Linksys Cable/DSL Firewall Router Bedienungsanleitung

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Bedienungsanleitung

Linksys

Linksys Gigaclear SPNMX55 Bedienungsanleitung

Linksys

Linksys EA-Series Bedienungsanleitung

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Bedienungsanleitung

Linksys

Linksys R74 Bedienungsanleitung

Linksys

Linksys Smart Switch LGS3XX Bedienungsanleitung

Linksys

Linksys WRK54G Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise