LINSHANG LS163 Bedienungsanleitung
Shenzhen Linshang Technology Co., Ltd.
8-28-2021 Page 1 of 6
LS163/LS163A
Transmission Meter
User Manual V2.0
Please read this manual carefully before using and reserve it for reference.
Note: IR peak wavelength of LS163 is 940nm, and IR peak wavelength of LS163A is 1400nm.
Shenzhen Linshang Technology Co., Ltd.
8-28-2021 Page 2 of 6
I. Product introduction
The transmission meter is a portable light transmission measuring instrument, it’s able to simultaneously
measure the visible light transmittance, IR rejection (transmission) value and UV rejection (transmission)
value of solar film, stick-film glass and other materials.
II. Parameters
1. UV Peak wavelength: 365nm
2. IR Peak wavelength: 940nm/ 1400nm
3. Visible light wavelength: 380-760nm, conform to the CIE photopic vision function standard
4. Accuracy: ±2% (Colorless and transparent material)
5. Resolution: 0.1%
6. Test Slot: 6mm *58mm (W*D)
7. Meter Size: 146mm *73mm *24mm (L*W*H)
8. Display: 128*128 Dot matrix LCD
9. Weight: 187g (Include Batteries)
10. Power supply: 4*AAA alkaline battery
III. Operation
1. Power On/Off
Power on self-test: Short press the “ ” button to power on the meter. The test sample can’t be placed
in the test slot before powering on otherwise the self-calibration can’t be completed. The serial number,
version number will be displayed on the interface and the meter will enter into the measurement interface
after 3s. The meter displays the corresponding measurement interface according to the setting
parameters.
Manual shutdown: Long press the “ ” button for 3s to power off the meter.
Auto shutdown: The meter will automatically power off after 3 minutes without any operation.
2. Parameter Setting
In the off state, long press the “ ” button for 3s and enter into the parameter setting mode.
Language
Shenzhen Linshang Technology Co., Ltd.
8-28-2021 Page 3 of 6
Short press the button to select Chinese or English, long press for 2s to confirm the option and enter the
next setting item.
Display Item
Short press the “ ” button to select the parameters and long press the “ ” button for 2s to confirm the
parameters. Now the meter enters into the measurement interface. Optional parameters are as following:
UVR/IRR/VLT (default option): UVR (UV rejection), IRR (IR rejection), VLT (Visible light
transmittance) are displayed on the interface.
UVT/IRT/VLT: UVT (UV transmission), IRT (IR transmission), VLT (Visible light transmittance) are
displayed on the interface.
VLT: Only VLT (Visible light transmittance) is displayed on the interface.
UVR/IRR/VLT UVT/IRT/VLT VLT
3. Operation
When we test the sample in the measurement state, short press the “ ” button to hold the data, the
“HOLD” symbol will be displayed on the lower left corner on the interface. Short press the “ ” button
again, the meter will return to the measurement state.
Shenzhen Linshang Technology Co., Ltd.
8-28-2021 Page 4 of 6
In the “HOLD” state, if the backlight is off, short press the “ ” button to light up the backlight. If the
backlight is on, it will cancel the “HOLD” state and start a new measurement.
4. Display interface autorotation
The meter display interface will rotate adaptively, which is convenient for reading measurement data. The
interface shown as below:
5. Backlight auto lit
In the measurement state, if the backlight is off, the backlight will be automatically on when the test sample
is placed in the slot and be off again without any operation after 30s.
6. Low power alarm
When the battery power is low, the empty battery symbol will display as " " on the right bottom of the
screen and flash, indicating that the battery needs to be replaced.
IV. Features
1. Test slot is 6mm which can directly test the window glass.
2. Adopt LCD dot matrix with backlight which can be used without lights.
3. The display interface will rotate adaptively which is convenient for reading measurement data.
4. Equipped with real-time dynamic self-calibration function, which is automatically self-calibrated after
powering on.
5. Three display interfaces can be selected. (UVR/IRR/VLT, UVT/IRT/VLT and VLT)
6. Ultra-low power consumption, 4 AAA alkaline batteries can maintain continuous measurement for
more than 100 hours
7. UV rejection meter, IR rejection meter, light transmittance meter. Three functions in ONE device.
8. Simple operation, putting the testing sample in the test slot, UV rejection, IR rejection, visible light
transmittance values of the sample will be displayed simultaneously.
Shenzhen Linshang Technology Co., Ltd.
8-28-2021 Page 5 of 6
9. Applicable to solar film, stick-film glass and other materials performance exhibition, production,
quality inspection and other occasions.
V. Precaution
1. When the meter can’t complete power on self-calibration, the interface will prompt “E30”. Possible
causes:
The ambient light is too strong.
Test sample is placed in the test slot, just take away the test sample and turn on the meter again.
Dust enters the test hole and blown off the dust with a dust blower.
The meter has hardware failures and needs to be returned to the factory for maintenance.
2. When the meter is not in use, turn off the power.
3. Avoid to contact with corrosive materials and be away from high temperature and high humidity
environment.
4. After using for a long time, due to the luminous efficiency of the LED light source (the temperature of
the LED light source increases, the efficiency decreases), the data of UVR, IRR and VLT may not be
displayed as “0.0, 0.0, 100” when there is no test sample or VLT, UVT ,IRT may not be displayed as
“100, 100, 100” . At this time, turn off the meter and then restart it , the meter will self-test and self-
calibrate, the measurement accuracy and normal use of the meter will not be affected.
VI. Packing List
No. Description Quantity Unit
1 Transmission Meter 1 set
2 User Manual 1 pcs
3 AAA Battery 4 pcs
4 Certificate / Warranty Card 1 pcs
5 Drawstring Bag 1 pcs
VII. Service
1. The meter has one-year warranty. If the meter works abnormally, please send the whole meter to the
company for maintenance.
2. Provide users with spare parts and lifelong maintenance services.
3. Provide the users with the meter inspection service for free.
4. Free technical support for long term.
Shenzhen Linshang Technology Co., Ltd.
8-28-2021 Page 6 of 6
Manufacturer: Shenzhen Linshang Technology Co., Ltd.
Website: www.linshangtech.com
Service hotline: 086-0755-86263411
Email: sales21@linshangtech.com
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere LINSHANG Messgerät Handbücher
LINSHANG
LINSHANG LS232 Bedienungsanleitung
LINSHANG
LINSHANG LS196 Bedienungsanleitung
LINSHANG
LINSHANG LS101 Bedienungsanleitung
LINSHANG
LINSHANG LS131 Bedienungsanleitung
LINSHANG
LINSHANG LS123 Bedienungsanleitung
LINSHANG
LINSHANG LS130 Bedienungsanleitung
LINSHANG
LINSHANG LS195 Bedienungsanleitung
LINSHANG
LINSHANG LS108H Bedienungsanleitung
LINSHANG
LINSHANG LS110H Technisches Handbuch
LINSHANG
LINSHANG LS200 Bedienungsanleitung
LINSHANG
LINSHANG LS170 Bedienungsanleitung
LINSHANG
LINSHANG LS108A Bedienungsanleitung
LINSHANG
LINSHANG LS191 Bedienungsanleitung
LINSHANG
LINSHANG LS108 Bedienungsanleitung
LINSHANG
LINSHANG LS251D Bedienungsanleitung
LINSHANG
LINSHANG LS160A Bedienungsanleitung
LINSHANG
LINSHANG LS301 Bedienungsanleitung
LINSHANG
LINSHANG LS133 Bedienungsanleitung
LINSHANG
LINSHANG LS201 Bedienungsanleitung
LINSHANG
LINSHANG LS236 Bedienungsanleitung
