Lippert Components Solera Smart Arm Bedienungsanleitung

Rev: 01.24.19 Page 1 CCD-0002165

SOLERA SMART ARM™ LED LIGHTING

INSTALLATION GUIDE

TI-302

AWNINGS

Purpose

The purpose of this document is to provide installation instructions for Solera Smart Arm™ LED Lights.

Resources Required

• Wire strippers

• Crimpers

Prior to Installation

1. Verify the unit's battery is fully charged and connected to the electrical system.

2. To turn the awning on, press and hold the LOCK/UNLOCK button (Fig. 1A) on the touchpad for three

seconds. The button's green LED indicator light will illuminate when the awning is on.

3. Press and hold the extend arrow button (Fig. 1B) until the awning is fully extended.

Fig. 1

Green

LED

Green

LED

Rev: 01.24.19 Page 2 CCD-0002165

SOLERA SMART ARM™ LED LIGHTING

INSTALLATION GUIDE

TI-302

AWNINGS

Installing LED Lights

Fabled (Fabric LED)

1. Depending on top wire or bottom wire installation, remove the wire covers in the drive mount arm.

2. If bottom installation, take the LED power wire (Fig. 2A) from the light track and run it down the drive

arm. Make sure to run the wires over the center pin of the drive mount arm.

3. Connect the red power wire from the LED to the red (LIGHT) wire in the smart arm and the black

ground wire from the LED to the white (LIGHT) wire in the smart arm.

4. Reinstall the wire covers in the drive mount arm.

LED Roll Tube

The awning fabric has a power wire (Fig. 3A) sewn into the hem. The power wire is connected to the LED

light in the roll tube prior to the end cap being installed on the roll tube by LCI.

1. Depending on top wire or bottom wire installation, remove the wire covers in the drive mount arm.

2. If bottom installation, take the LED power wire (Fig. 2A) sewn into the hem of the fabric and run it

down the drive arm. Make sure to run the wires over the center pin of the drive mount arm.

3. Connect the red power wire from the LED to the red (LIGHT) wire in the smart arm and the black

ground wire from the LED to the white (LIGHT) wire in the smart arm.

4. Reinstall the wire covers in the drive mount arm.

Fig. 2

Fig. 3

Rev: 01.24.19 Page 3 CCD-0002165

As a supplier of components to the RV industry, safety, education and customer satisfaction are our primary concerns. Should you

have any questions, please do not hesitate to contact us at (574) 537-8900 or by email at [email protected]. Self-help tips,

technical documents, product videos and a training class schedule are available at lci1.com or by downloading the MyLCI app.

SOLERA SMART ARM™ LED LIGHTING

INSTALLATION GUIDE

TI-302

AWNINGS

Operation

NOTE: The controller (touchpad) does not need to be unlocked to control the lights.

1. Press the light button (Fig. 1C) to turn on the LED light strip. The button's green LED indicator light will

illuminate when the LED light strip is on.

2. There are three light level settings:

A. Press the light button once for the low setting or 10% illumination

B. Press the light button twice for the medium setting or 30% illumination.

C. Press the light button three times for the high setting or 100% illumination.

3. Press the light button four times to turn off the LED light strip.

NOTE: The light setting defaults to 100% illumination if turned off then on by an external light input

command, CAN bus command or if motion is detected by the IR sensor while the light setting is in

AUTO mode.

LED Light Rail

1. Seal the back of the LED light rail.

2. Mount the LED light rail (Fig. 4A) directly below the awning rail (Fig. 4B) and secure to the side of the unit.

3. Depending on top wire or bottom wire installation, remove the wire covers in the drive mount arm.

4. Route the light wire over the top of the upper brackets on the mount arm and run the light wire down

through the support arm assembly in the same manner as the motor wire (Fig. 4C).

5. Connect the red power wire from the LED to the red (LIGHT) wire in the smart arm and the black ground

wire from the LED to the white (LIGHT) wire in the smart arm.

6. Reinstall the wire covers in the drive mount arm.

Fig. 4

BA C

Andere Handbücher für Solera Smart Arm

Inhaltsverzeichnis

Andere Lippert Components Zubehör Handbücher

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Awnbrella Montageanleitung

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Solera Hybrid Bedienungsanleitung

Lippert Components

Lippert Components SURESHADE ATF Kurzanleitung

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Solera 434718 Bedienungsanleitung

Lippert Components

Lippert Components Solera Montageanleitung

Lippert Components

Lippert Components 2021130659 Montageanleitung

Lippert Components

Lippert Components Solera Montageanleitung

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Solera Slide Topper with Access Plates Montageanleitung

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Solera Classic Montageanleitung

Lippert Components

Lippert Components Solera Slide Topper Montageanleitung

Lippert Components

Lippert Components Solera Power Awning XL Bedienungsanleitung

Lippert Components

Lippert Components Edge Awning Bedienungsanleitung

Lippert Components

Lippert Components Solera Bedienungsanleitung

Lippert Components

Lippert Components Solera Smart Arm Montageanleitung

Lippert Components

Lippert Components Solera Classic Bedienungsanleitung

Lippert Components

Lippert Components Solera Classic Awning Gebrauchs- und Pflegehandbuch

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung