LOGICDATA SILVERsensor Bedienungsanleitung

SILVERsensor

Manual

Document Version 3

February 2020

SILVERsensor Manual

Contents

1. Introduction................................................................................... 3

2. Safety ............................................................................................. 6

3. Box Contents ...............................................................................12

4. Safety During Assembly ............................................................13

5. Indentify Your Bed ......................................................................14

6. Assembly: Standard Variant......................................................16

7. Assembly: Lite Variant................................................................18

8. Operation via the App...............................................................20

9. Additional Information ..............................................................23

SILVERsensor Manual 3

1. Introduction

About SILVERsensor

Thank you for choosing SILVERsensor by LOGICDATA. With

SILVERsensor, every eort has been made to ensure your comfort

and safety. This Manual is intended to enable persons to assemble

and operate the product safely. However, incorrect installation of

the product, or usage outside of the intended use described in this

Manual may lead to hazardous situations. In Chapter 2, “Safety”,

and throughout this Manual, potential risks, their consequences,

and steps to avoid harm are explained.

Observing the safety instructions in this Manual will help you to

avoid hazards and minimize damage to the system. All persons

involved in the assembly of the system must have the full product

documentation available to them at all times. Product documentation

consists of this Manual and any other relevant documents supplied

by the manufacturer. Documentation must always be kept complete

and legible.

In this manual, you will ﬁnd important information that will help you

install the product correctly and safely. Important safety instructions

are included in Chapter 2 of this Manual. You are required to

read all safety instructions carefully before installing or operating

SILVERsensor.

ii.

All rights, especially the rights to translate or reproduce the

document, are reserved. No part of this manual may be reproduced

mechanically, electronically, or by other means, in any form, without

prior written permission of LOGICDATA Electronic & Software

Entwicklungs GmbH. Violations involving copyright may result in

legal action.

2020 LOGICDATA Electronic & Software Entwicklungs GmbH

SILVERsensor Manual

iii.

Liability

The descriptions of product characteristics in this Manual are not a

guarantee of the presence of these characteristics. LOGICDATA is

not liable for damage or injury caused by:

• Improper product use

• Disregard of the documentation

• Unauthorized product alterations

• Improper work on and with SILVERsensor or the Bed Frame

• Operation of damaged products

• Improperly performed repairs

• Unauthorized changes to the operating parameters

• Disasters, external inﬂuence, and force majeure

LOGICDATA assumes no liability for technical or printing errors,

for deﬁciencies in this documentation, or for damages caused

directly or indirectly by the delivery, performance, or usage of this

documentation.

iv.

Contact Information

LOGICDATA Electronic & Software-Entwicklungs GmbH

Wirtschaftspark 18

8530 Deutschlandsberg

Austria

LOGICDATA North America Inc.

5300 Broadmoor Ave SE, Suite D

Grand Rapids, MI 49512 USA

T: +1 616 328 8841

o[email protected]

SILVERsensor Manual 5

Other Information

Loi 101

The Charter of the French Language (La charte de la langue

française) or Bill 101 (Loi 101) guarantees the right of the population

of Quebec to conduct business and commercial activities in

French. The bill applies to all products sold and used in Quebec.

For products that will be sold or used in Quebec, Resellers must

provide all product-relevant texts in French. These include, but are

not limited to:

• Manuals

• All other product documentation, including datasheets

• Inscriptions on the product (such as labels), including

those on product packaging

• Warranty certiﬁcates

The French inscription may be accompanied with a translation or

translations, but no inscription in another language may be given

greater prominence than that in French.

Cet appareil numerique de la classe B est conforme a la norme

NMB-003 du Canada.

This Class B digital apparatus complies with Canadian ICES-003.

FCC Compliance

The Radio Frequency for this product is 2.4 GHz

The SILVERsensor by LOGICDATA complies with FCC CFR 47 Part

15 Subpart B/C. Operation is subject to the following conditions:

The product may not cause harmful interference

The product must accept any interference received, including

interference that may cause undesired operation

To comply with the FCC RF exposure compliance requirements, you

may not make any changes to the product or the antenna. Changes

to the antenna or the product could result in the product exceeding

the RF exposure requirements. This may void your authority to use

the product.

SILVERsensor Manual

2. Safety

IMPORTANTSAFETYINSTRUCTIONS

About this Document

This Manual is intended to help users safely install the SILVERsensor

by LOGICDATA. It also contains instructions for operating the Bed

Frame to which the SILVERsensor is connected using a mobile App.

This Manual does not include instructions or safety advice for

assembling the Bed Frame, or for operating the Bed Frame using

the Remote Control, or through applications other than the mobile

App. You must also read the documentation for your Bed Frame

in full before installing the SILVERsensor or using the Bed Frame.

ii.

General Safety Information

The following safety regulations and obligations are valid when

handling the system:

• Do not operate the Bed Frame unless it is in full working order

• Do not remove, change, bridge, or bypass any protection or

safety features

• Do not convert or modify the Bed Frame without written

approval

• Do not use unauthorized spare parts for repair

• Only physically able adults are allowed to assemble the product

• Do not attempt to change or replace parts unless the product is in

a de-energized state

• Ensure that no children or animals are in the proximity of the

Bed Frame when operating it

• Ensure nothing obstructs the Bed Frame’s range of motion (e.g.

night stands or open windows)

• Do not sit directly on any Platform when operating the Bed

Frame. Distribute your weight evenly

SILVERsensor Manual 7

iii.

Explanation of Symbols and Signal Words

DANGER

The signal word DANGER

indicates a hazardous situation

which, if not avoided, will result

in death or serious injury.

WARNING

The signal word WARNING

indicates a hazardous situation

which, if not avoided, could

result in death or serious injury.

CAUTION

The signal word CAUTION

indicates a hazardous situation

which, if not avoided, could

result in minor or moderate

injury.

NOTICE

The signal word NOTICE

indicates a situation that will

not lead to personal injury, but

could lead to damage to the

product or the environment.

SILVERsensor Manual

iv.

Residual Risks

DANGER

To reduce the risk of electric

shock:

• Always unplug the Bed Frame

from the electrical outlet

before cleaning.

WARNING

To reduce the risk of burns, ﬁre, electric shock, or injury

to persons:

• Unplug the Bed Frame from the outlet before putting on

or taking o parts.

• Close supervision is necessary when the Bed Frame is

used by, or near children, invalids, or disabled persons.

• Use this Bed Frame only for its intended use as

described in these instructions. Do not use attachments

not recommended by the manufacturer.

• Never operate the Bed Frame if it or any parts have a

damaged Cable or Plug, are not working properly, have

been dropped or damaged, or dropped into water.

Return the bed for examination and repair or replace it.

• Keep all Cables away from heated surfaces.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate the Bed Frame where aerosol (spray)

products are being used or where oxygen is being

administered.

• To disconnect the Bed Frame, turn all controls to the o

position, then remove plug from outlet.

• WARNING: Risk of injury – keep children away from the

extended foot support (or other similar parts).

SILVERsensor Manual 9

WARNING

Moderate risk of death or

serious injury

The maximum allowed load on

your Bed Frame is speciﬁed in

its Manual. Overloading the Bed

Frame, or any single Platform,

may lead to death or serious

injury.

• Do not overload the Bed

under any circumstances

• Do not stand on the Bed

Frame

• Do not apply the maximum

load to the Foot or Head

Platforms

• Do not sit on the mattress whi-

le the Bed Frame is in motion.

Distribute your weight evenly

WARNING

Moderate risk of death or

serious injury

Opening electrical components,

or attempting improper conver-

sions or modiﬁcations to electri-

cal or mechanical components

on the Bed Frame may lead to

death or serious injury.

• Do not convert or modify

the Adjustable Bed Frame

• Never open electrical

components

SILVERsensor Manual

WARNING

Moderate risk of death or

serious injury in explosive

atmospheres

Operating the SILVERsensor

in potentially explosive atmo-

spheres may lead to death or

serious injury through explo-

sions.

•

Read the relevant directives

to determine whether an

atmosphere is potentially

explosive

•

Do not operate the Bed

Frame in potentially explosive

atmospheres

WARNING

Moderate risk of death or

serious injury through crushing

When the Bed Frame moves

to a new position, it is possible

that persons will be crushed

between the Bed Frame and

foreign objects.This may lead to

death or serious injury.

• Do not store foreign objects

underneath the Bed Frame

• Ensure nothing obstructs the

Bed Frame’s range of motion

(e.g. night stands or open

windows)

Inhaltsverzeichnis

Andere LOGICDATA Zubehör Handbücher

LOGICDATA

LOGICDATA ACS-CB-SENS Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung