LogTag UTRED30-16 Technisches Datenblatt

www.logtagrecorders.com

UTRED30-16

30-day

Temperature

Recorder with

Display



Product User

Guide

Document Release Version: 1.2

Published 10 April 2019

LogTag Recorders

(603) 746-5524

www.MicroDAQ.com

Distributed by MicroDAQ.com, Ltd.

UTRED30-16User Guide 2

Contents

Safety Information 4

Liability 4

Battery Life 4

Disclaimer 4

Typographical Conventions 4

Introduction 5

Features 5

Case 6

Buttons 6

Display and LED 6

Sensors 6

Power Supply 6

PDF 6

What You Need 7

Required Items 7

Optional Items 7

Preparing a UTRED30-16 for first use 8

In the office 8

On-site 8

Inserting the Batteries 9

Configuring the UTRED30-16 for logging 10

Display Overview 15

Powering the UTRED30-16 17

Low power operation 18

Audible Alarm 19

Real Time Clock 19

Starting the Logger 20

Push button start 20

Push Button Start with Start Delay 21

Automatic date/time start 21

During Recording 22

Marking a reading with an inspection mark 24

Clearing an Alarm 24

Paused Readings 25

Sensor is disconnected 25

Power Save 26

Clearing the Min/Max Values 26

Reviewing Day Statistics on the UTRED30-16 27

Stopping the UTRED30-16 31

Automatically 31

Manually 31

Plugging the UTRED30-16 into a USB port 32

Accessing the files 33

Interpreting the Data 34

Data Evaluation - Report 34

Data Evaluation - Data List 36

Data Evaluation - Day Summary 38

Resetting the Logger 39

Hibernating a UTRED30-16 39

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

UTRED30-16User Guide 3

Replacing the Batteries 40

Technical Specifications 41

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Safety Information UTRED30-16User Guide 4

Safety Information

The UTRED30-16 PDF USB temperature logger contains two "AAA" non-rechargeable batteries. These

batteries can be replaced as detailed in Replacing the AAA batteries.

The logger also contains a non-rechargeable backup battery (LiMnO2 CR2032 coin cell).

When this battery indicates “LOW” ( ), it can be replaced by a qualified

technician. Please contact your distributor for further information and also refer to

the section about Powering the UTRED30-16 on page17.

Keep out of the reach of children!

Do not expose the logger to extreme temperatures as it may lead to the

destruction of the battery and may cause injuries.

Empty batteries should be recycled or disposed of according to your local regulations.

Liability

LogTag Recorders’ standard warranty terms apply. A copy can be requested by emailing

support@logtagrecorders.com. In addition, LogTag Recorders shall not be held liable:

lIf the device was used beyond LogTag Recorders’ stated limitations

lFor any claims due to the improper storage and use of the device

lFor any problems with refrigeration units

lFor the bad quality of the monitored goods, if any

lFor incorrect readings if the device was used with a low battery

lFor consequential loss

Battery Life

The main batteries in the UTRED30-16 are designed to power the device for up to 12 months, provided:

lfresh batteries from a reputable manufacturer are used

lthe device is not downloaded excessively (more than once a week)

ldata are reviewed on the display no more than once daily for 30 seconds

lthe recording interval is not shorter than 5 minutes

la strong wireless signal is available where the UTRED30-16 is deployed

lthe acoustic alarm is not active over long periods

lthe device is stored and operated according to LogTag Recorders’ recommendations

Please refer to Powering the UTRED30-16 on page17 for more information.

Disclaimer

The UTRED30-16 monitors temperature exposure and not the quality of the goods it accompanies. Its

purpose is to signal if product quality evaluation/testing is required.

Typographical Conventions

Text in this font refers to buttons on the UTRED30-16.

Text in this font refers to option settings, dialogue boxes or actions to be taken in LogTag® Analyzer.

Text in this font describes features of the product.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Introduction UTRED30-16User Guide 5

Introduction

The LogTag® UTRED30-16 temperature logger features a data logging memory storing up to 16129

temperature readings and a separate statistical memory, storing maximum and minimum reading as well

as alarm duration for each of the last 30 days.

During recording the display shows…

… the current temperature (of the most recent reading)

… the alarm status (within or outside the acceptance range)

… an alarm trigger summary of up to the last 30 days (today and 29 days previous)

… the current time and battery status.

Alarm events can be triggered when a number of readings are outside pre-set temperature thresholds, and

a “day alarm indicator” appears on the display.

Logged temperature data can be viewed on any PC by plugging the unit into a computer’s USB port via a

micro-USB cable. A PDF file is generated, which can be accessed using PDF software such as Acrobat

Reader. The UTRED30-16 can also be downloaded to the free companion software LogTag® Analyzer,

where you can display data in chart, list or summary formats. The software also allows electronic archiving

and exporting or transmitting data in support of sophisticated data management systems.

Features

The UTRED30-16 temperature logger features a large display and USB connectivity with a familiar LogTag®

feel.



Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Features UTRED30-16User Guide 6

Case

lMounting lug for secure fastening of logger to fixtures

lMicro-USB socket with attached protective cap

lGold-plated, high-quality temperature sensor socket

lRobust polycarbonate case, IP51

l2 user replaceable AAA batteries, accessible via a compartment at the rear of the product

Buttons

lSTART/CLEAR/STOP button( ); can be used to start and stop the unit. An active alarm is cleared using

this button. It is also used to exit the statistics review.

l REVIEW/MARK button ( ); can be used to enter the statistics review and to scroll through the

statistical data directly on the display. It is also used to place an inspection mark in the data listing

and to reset the min/max display.

lFN button ( ); the UTRED30-16 currently does not use this button.

Display and LED

The extra large display shows current, minimum and maximum temperatures and if alarm events have

occurred for the current day and up to 29 days in the past. Details of any alarm event can be checked by

inspecting the statistics history on the logger's display or in more detail via LogTag® Analyzer. In addition, a

red Alarm LED shows if an alarm event has occurred.

Sensors

The UTRED30-16 will accept any sensor from the ST100 product range, up to 3m length.

Power Supply

The same USB socket that is used for communication is also used for providing power to the UTRED30-16,

using an external 5V USB power supply. The AAA batteries maintain all functionality when USB power is not

connected. A long-life CR2032 lithium backup battery maintains essential functions if the AAA batteries are

empty and external power is not supplied.

PDF

The UTRED30-16 will generate a detailed PDFreport when plugged into a USB port of a PC. The PDF report

shows a summary of the trip, presents the data in chart and list format and also includes a day summary

page, showing an overview of the statistics collected. A CSV file of the data list is also available.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

What You Need UTRED30-16User Guide 7

What You Need

Required Items

In addition to your LogTag® UTRED30-16 temperature logger you will need the following:

la Micro-USB to USB-A cable to connect the UTRED30-16 to your PC

lan external probe.You can use any probe of the ST100 series

lfor configuration - a PC running Windows 7 or later and LogTag® Analyzer version 3 installed

l2 x AAA batteries

For optimum performance we recommend Lithium Iron Disulphide batteries, such as

Energizer® Ultimate Lithium™ Batteries, or similar batteries from other reputable

manufacturers.

lA small Phillips screwdriver to open the battery compartment

Optional Items

In addition to the above, following items are useful accessories:

la 5V/5W USB power supply, if you wish to power the unit permanently via the USB socket.

la wallmount bracket, which can be used, for example, to attach the UTRED30-16 to the side of a

fridge

la Glycol buffer, which simulates environmental behaviour of a vaccine vial

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Preparing a UTRED30-16 for first use UTRED30-16User Guide 8

Preparing a UTRED30-16 for first use

Before your UTRED30-16 can record temperature data you need to perform a few setup steps.

In the office

These steps are completed in your office, using a PC connected to the internet.

linstall the batteries into the unit

ldownload and install the latest version of LogTag® Analyzer 3. You can do this from the LogTag

Recorders Software Download page

lconfigure the unit using LogTag® Analyzer

On-site

Once you have completed this process you can take the logger to the location where it will be installed and

lconnect a sensor and place the unit, preferably using a wall mount bracket

lstart the logger

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Preparing a UTRED30-16 for first use UTRED30-16User Guide 9

Inserting the Batteries

The UTRED30-16 operates with two AAA batteries.

1. Remove the screw from the rear compartment lid.

2. Remove the lid, exposing the battery compartment.

3. Insert the AAA batteries in the correct orientation, as shown. The polarity is marked inside the battery

compartment.

4. Replace the rear cover and the screw.

5. Press any button to turn on the display.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Preparing a UTRED30-16 for first use UTRED30-16User Guide 10

Configuring the UTRED30-16 for logging

Before a UTRED30-16 logger can be used, it must be configured with the parameters required for

lstarting and recording temperature values

ltriggering alarms

This is done using LogTag® Analyzer software, which can also be used for downloading and analyzing data.

lStart the LogTag® Analyzer software.

lRemove the protective cap from the logger's USB socket and plug the Micro USB end of the cable

into the socket. Plug the other end of the cable into a USB socket on your computer and wait for the

drivers to be installed1.

lFrom the menu click LogTag - Configure; LogTag® Analyzer will display the configuration options for

connected loggers.

Standard Configuration Settings

The standard configuration is similar to those of other LogTag® logger products and includes settings such

as User ID, start method, pre-start recording, logging interval and duration, start delay, and password.

Adjust the settings as required. For detailed information about each parameter please read the section

about Configuring a LogTag® for logging in LogTag® Analyzer’s User Guide or press F1 for help.

UTRED30-16 Start Options

During configuration with LogTag® Analyzer you can decide when the UTRED30-16 starts taking

temperature readings:

Push button start

Date/Time start

The logger will start taking temperature readings at the date and time you specify (local time).



When you choose the push button start option, you can select to record Pre-start readings or Begin

recording after a delay:

lIf you select pre-start readings, the UTRED30-16 starts recording as soon as it is and will continue to

do so until you start the unit. No alarms are processed while pre-start readings are being taken, pre-

start readings will not appear in the PDF file, and no PDF file will be generated. Using pre-start

readings is a good way to avoid data loss if you forget to start the unit, as you can still access the

1 You can configure more than one UTRED30-16 at the same time, however it is practical to limit the number of units to about 6, using a powered USB

hub.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Andere Handbücher für UTRED30-16

Inhaltsverzeichnis

Andere LogTag Laborausrüstung Handbücher

LogTag

LogTag USRID-16W Technisches Datenblatt

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung