LogTag UTRED30-16 Bedienungsanleitung

Version F - September 2021

www.logtagrecorders.com

Quick Start Guide

What's Included 3

Downloading LogTag Analyzer 4

Conﬁguring your UTRED30-16 5

Starting your UTRED30-16 6

During Recording 8

Downloading Results 9

Quick Start Guide Contents

Page 3

What's Included

Please check you have each of the items shown below

before continuing with setting up your UTRED30-16.

UTRED30-16

USB Cable AC Adapter

Sensor

Cover

(Optional

to Use)

2x AAA Battery

(Not included)

Glycol Buffer

(Not included)

UTRED30

Wall mount

(Not included)

External Probe/s

(Not included)

Page 4

Downloading LogTag

Analyzer

To download the latest LogTag Analyzer, open your

browser and navigate to:

https://logtagrecorders.com/software/LTA3/

1. Click ‘Go To Downloads Page’ button

2. Click ‘Download Now’ to start the download

3. Click ‘Run’ or ‘Save File’ then double-click the

downloaded file to open Analyzer Setup Wizard

4. Once the Analyzer Setup Wizard is open, follow

the on-screen prompts to install Analyzer onto your

computer

5. Click ‘Finish’ to exit the Setup Wizard

Warning: Please ensure no other LogTag software is

currently running on your computer before running the

Analyzer software.

Page 5

Conﬁguring your

UTRED30-16

Connect your UTRED30-16

to your computer via the USB

cable provided. The USB

socket on the device is located

on the bottom, protected by a

rubber seal.

1. Open LogTag Analyzer

2. Click ‘Configure’ from the ‘LogTag’ menu or click

the ‘Wizard’ icon. Please select which Channel(s) you

wish to log, in ‘Log channels:’ setting.

3. Adjust your logger configuration settings as

required. For more information on configuration

settings, please refer to Configuring the UTRED30-16

in the Product User Guide or press ‘F1’ for help from

your keyboard

4. Click ‘Next’ to upload the configuration settings to

the logger

5. Click ‘Close’ to exit the configuration page

Note: Please ensure you have LogTag Analyzer

version 3.1.15 onwards for configuration of the

UTRED30-16 dual-sensor models.

Page 6

Starting your UTRED30-16

Press and hold the

START/Clear/Stop button.

STARTING will appear

along with READY.

Release the button once

READY disappears.

The UTRED30-16 now

records temperature

data.

The Logger will not start

if:

• You release the

button before READY

disappears.

Before starting, please ensure you have connected

the ST100X external probe(s) into the correct Channel

sensor port(s) you have configured to record from.

Before startin

, please ensure you have connected

the ST100X external

robe(s) into the correct Channel

sensor port

(

)

you have confi

ured to record from

Page 7

Starting your UTRED30-16

(continued...)

• You keep holding the

button for more than 2

seconds after READY

disappears.

• The backup battery is

critically low and the

logger is not connected

to power.

Press the CHANNEL

button to change the

channel on screen.

In this example, the

display switched from

CH1 to CH2.

Note: The sensor cover can be inserted in an unused

sensor port.

Page 8

During Recording

To view more information about clearing alarms and

resetting and reviewing trip statistics, please refer to

the Product User Guide.

End of page

Page 9

Downloading Results

Alternatively, you can follow the steps below:

1. Open LogTag Analyzer

2. Click ‘LogTag’ from the ‘Download’ menu or press ‘F4’

3. Click ‘Close’ to exit the download page

Connect your UTRED30-16 to

your computer via the USB cable

provided. The USB socket on the

device is located on the bottom,

protected by a rubber seal.

A new device drive will appear in file explorer with the

files containing the recorded data for the Channel(s)

monitored.

By default, auto-download is enabled in LogTag Analyzer

so when you open the program, data results will be

displayed after connecting your UTRED30-16 to your

computer

Andere Handbücher für UTRED30-16

Inhaltsverzeichnis

Andere LogTag Messgerät Handbücher

LogTag

LogTag TIC20 Bedienungsanleitung

LogTag

LogTag WHO USRID-16W1 Technisches Datenblatt

LogTag

LogTag TRID30 Bedienungsanleitung

LogTag

LogTag UTRED-16 Bedienungsanleitung

LogTag

LogTag UTRED30-WiFi Bedienungsanleitung

LogTag

LogTag UTRED30-16 Technisches Datenblatt

LogTag

LogTag USRID-16W Technisches Datenblatt

LogTag

LogTag TRED30-16R Bedienungsanleitung

LogTag

LogTag UTREL30-WIFI Bedienungsanleitung

LogTag

LogTag TRED30-7 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung