Lovibond MD 100 Bedienungsanleitung

Lovibond®Water Testing

Tintometer®Group

Manual of Methods

MD 100 • MD 110 • MD 200

Manual of Methods

Page 4

Methodenhandbuch

Seite 48

Manual de Metodos

Página 94

Methodes Manuel

Page 140

Manuale dei Metodi

Pagina 186

Metodos Manual

Página 232

Handboek Methoden

Zijde 278

方法手册

Page 322

NL Handboek van Methoden 01/20EN Handbook of Methods 01/20

KS4.3 T

0.1 - 4 mmol/l KS4.3

Acid / Indicator

S:4.3

Instrument specific information

The test can be performed on the following devices. In addition, the required cuvette

and the absorption range of the photometer are indicated.

Instrument Type Cuvette λMeasuring Range

MD 200, MD 600, MD 610,

MD 640, MultiDirect, PM 620,

PM 630

ø 24 mm 610 nm 0.1 - 4 mmol/l KS4.3

SpectroDirect, XD 7000,

XD 7500

ø 24 mm 615 nm 0.1 - 4 mmol/l KS4.3

Material

Required material (partly optional):

Reagents Packaging Unit Part Number

Alka-M-Photometer Tablet / 100 513210BT

Alka-M-Photometer Tablet / 250 513211BT

Application List

• Waste Water Treatment

• Drinking Water Treatment

• Raw Water Treatment

Notes

1. The terms Alkalinity-m, m-Value, total alkalinity and Acid demand to KS4.3 are iden-

tical.

2. For accurate results, exactly 10 ml of water sample must be used for the test.

Display in the MD

100 / MD 110 /

MD 200

Bar code for the

detection of the

methods

Method name

Measuring range

Chemical Method

Method number

Language codes

ISO 639-1 Revision status

KS4.3 T / 20

How to use

ENHandbook of Methods4

Implementation of the provision Acid capacity KS4.3 with Tablet

Select the method on the device

For this method, no ZERO measurements are to be carried out with the following de-

vices: XD 7000, XD 7500

10 ml

Fill 24 mm vial with 10 ml

sample.

Close vial(s).

Sample

Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Dissolve tablet(s) by inver-

ting.

Sample

Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Test

Press the TEST (XD:

START)button.

The result in Acid Capacity KS4.3 appears on the display.

Performing test

procedure

KS4.3 T / 20

NL Handboek van Methoden 01/20EN Handbook of Methods 01/20

How to use

ENHandbook of Methods 5

Alkalinity-m T / M30

ENMethod Reference Book1.06

Alkalinity-m T M30

5 - 200 mg/l CaCO3tA

Acid / Indicator

Notes

1. The terms Alkalinity-m, m-Value, total alkalinity and Acid demand to KS4.3 are identical.

2. For accurate results, exactly 10 ml of water sample must be used for the test.

Alkalinity-m T / M30

ENMethod Reference Book1.0 7

Implementation of the provision Alkalinity, total = Alkalinity-m =

m-Value with Tablet

Select the method on the device

10 ml

Sample

Fill 24 mm vial with 10 ml

sample.

Close vial(s). Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Zero

Press the ZERO button. Remove the vial from the

sample chamber.

24 mm

Add ALKA-M-

PHOTOMETER tablet.

Crush tablet(s) by rotating

slightly.

Close vial(s).

Alkalinity-m T / M30

ENMethod Reference Book1.08

Sample

Test

Dissolve tablet(s) by

inverting.

Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Press the TEST (XD:

START)button.

The result in Alkalinity-m appears on the display.

Alkalinity-m T / M30

ENMethod Reference Book1.0 9

Analyses

The following table identifies the output values can be converted into other citation

forms.

Unit Cite form Scale Factor

mg/l CaCO31

°dH 0.056

°eH 0.07

°fH 0.1

°aH 0.058

KS4.3

Chemical Method

Acid / Indicator

Appendix

Derived from

EN ISO 9963-1

Bromine T / M80

ENMethod Reference Book1.010

Bromine T M80

0.05 - 13 mg/l Br2Br

DPD

Preperation

1. Cleaning of vials:

As many household cleaners (e.g. dishwasher detergent) contain reducing

substances, the subsequent determination of oxidising agents (e.g. ozone and

chlorine) may show lower results. To avoid measurement errors, the glassware

used should be free of chlorine consumption. To achieve this, all glassware should

be placed in a sodium hypochlorite solution (0.1 g/l) for one hour and then rinsed

thoroughly with deionised water.

2. When preparing the sample, Bromine outgassing, e.g. through the pipette or shaking,

must be avoided. The analysis must take place immediately after taking the sample.

3. Strong alkaline or acidic water samples must be adjusted between pH 6 and pH 7

before the analysis (use 0.5 mol/l Sulphuric acid or 1 mol/l Sodium hydroxide).

Bromine T / M80

ENMethod Reference Book1.0 11

Implementation of the provision Bromine with Tablet

Select the method on the device

10 ml

Sample

Fill 24 mm vial with 10 ml

sample.

Close vial(s). Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Zero

Press the ZERO button. Remove the vial from the

sample chamber.

Empty vial except for a few

drops.

24 mm

Add DPD No. 1 tablet . Crush tablet(s) by rotating

slightly.

Fill up vial with sample to

the 10 ml mark.

Andere Handbücher für MD 100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Lovibond Messgerät Handbücher

Lovibond

Lovibond Tintometer SensoDirect Salt110 Bedienungsanleitung

Lovibond

Lovibond SD 60 REDOX Bedienungsanleitung

Lovibond

Lovibond EC 2000 Gardner Montageanleitung

Lovibond

Lovibond Tintometer SensoDirect Salt110 Bedienungsanleitung

Lovibond

Lovibond Photometer-System MD100 Bedienungsanleitung

Lovibond

Lovibond SD 50 pH Bedienungsanleitung

Lovibond

Lovibond Photometer-System MD100 Bedienungsanleitung

Lovibond

Lovibond Tintometer MD100 Bedienungsanleitung

Lovibond

Lovibond MD200 Bedienungsanleitung

Lovibond

Lovibond MicroDirect pH10 Bedienungsanleitung

Lovibond

Lovibond Scuba Bedienungsanleitung

Lovibond

Lovibond CheckitDirect Bedienungsanleitung

Lovibond

Lovibond SD 300 pH Bedienungsanleitung

Lovibond

Lovibond RT 400 Bedienungsanleitung

Lovibond

Lovibond Tintometer MD100 Bedienungsanleitung

Lovibond

Lovibond SD 50 Bedienungsanleitung

Lovibond

Lovibond MD200 Bedienungsanleitung

Lovibond

Lovibond Photometer-System MD100 Bedienungsanleitung

Lovibond

Lovibond ORPTester10 Bedienungsanleitung

Lovibond

Lovibond Fx Montageanleitung

Lovibond

Lovibond CheckitDirect Bedienungsanleitung

Lovibond

Lovibond Maxi Direct Bedienungsanleitung

Lovibond

Lovibond SensoDirect pH200 Bedienungsanleitung

Lovibond

Lovibond SensoDirect Oxi200 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung