Copyright 1999, Lucent Technologies
All Rights Reserved
Printed in U.S.A.
Notice
Every effort was made to ensure that the information in this
book was complete and accurate at the time of printing. How-
ever, information is subject to change.
Your Responsibility for Your System’s Security
Toll fraud is the unauthorized use of your telecommunications
system by an unauthorized party, for example, persons other
than your company’s employees, agents, subcontractors, or
persons working on your company’s behalf. Note that there
may be a risk of toll fraud associated with your telecommuni-
cations system and, if toll fraud occurs, it can result in substan-
tial additional charges for your telecommunications services.
You and your system manager are responsible for the security
of your system, such as programming and configuring your
equipment to prevent unauthorized use. The system manager is
also responsible for reading all installation, instruction, and
system administration documents provided with this product in
order to fully understand the features that can introduce risk of
toll fraud and the steps that can be taken to reduce that risk.
Lucent Technologies does not warrant that this product is
immune from or will prevent unauthorized use of common-car-
rier telecommunication services or facilities accessed through
or connected to it. Lucent Technologies will not be responsible
for any charges that result from such unauthorized use.
Lucent Technologies Fraud Intervention
If you suspect that you are being victimized by toll fraud and
you need technical support or assistance, call the Lucent Tech-
nologies National Customer Care Center support line at
1-800-643-2353. Outside the continental United States, contact
your local Lucent Technologies authorized representative.
Federal Communications Commission Statement
Part 15: Class A Statement. This equipment has been tested
and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at his
own expense
Trademarks
DEFINITY is a registered trademark of Lucent Technologies.
GuestWorks is a registered trademark of Lucent Technologies.
Ordering Information
Write or Call:
Lucent Technologies BCS Publications Center
P.O. Box 4100, Crawfordsville, IN 47933
Voice 1-800-457-1235 Intl Voice +1-317-361-5353
Fax 1-800-457-1764 Intl Fax +1-317-361-5355
Order: Document No. 555-230-890
Comcode 108383811
Issue 3, June 1999
For more information about Lucent Technologies documents,
refer to the section entitled “Related Documents” in “About
This Document.”
Product Support
To receive support on your product, call 1-800-242-2121. Out-
side the continental United States, contact your local Lucent
Technologies authorized representative.
European Union Declaration of Conformity
The “CE” mark affixed to the DEFINITY® equipment
described in this book indicates that the equipment conforms to
the following European Union (EU) Directives:
• Electromagnetic Compatibility (89/336/EEC)
• Low Voltage (73/23/EEC)
• Telecommunications Terminal Equipment (TTE) i-CTR3
BRI and i-CTR4 PRI
For more information on standards compliance, contact your
local distributor.
Comments
To comment on this document, return the comment form.
Lucent Technologies Web Page
The World Wide Web home page for Lucent Technologies is
http://www.lucent.com
Acknowledgment
This document was prepared by Product Documentation
Development, Lucent Technologies, Denver, CO.
230890_3.bk Page ii Tuesday, April 20, 1999 12:57 PM
