Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com
Installation Procedure:
●Before installation, unscrew the lock nut (A1) counterclockwise from the LED module (D), and remove the
female wire (B) and O-Ring (C).
●Unscrew (F), remove the fixture cover (E), and screw the LED module (D) to the mounting base (A2)
counterclockwise.
●Drill holes on the hard surface and press the anchors (H) into the holes (the package does not include this
accessory).
●Fix the base (A2) to the surface with screws (G) (the package does not include this accessory).
●Connect fixture wires to main low voltage wire using outdoor rated waterproof (H) wire nuts.
●Then use screws (F) to fix the fixture cover (E) onto the mounting base (A2).
●The power wire can be fixed in a variety of ways on site. (See 4th diagram above).
●For PRO modules, follow the instruction on our LumienPRO’s remote control.
Application 2：Wall Installation
A1- Lock Nut A2- Mounting Base B - Female Connector C- O-Ring D- LED Module E- Fixture Cover F- Securing Screws
G –Mounting Screws H- Waterproof Wire Nuts
Installation Procedure:
●Before installation, unscrew the lock nut (A1) counterclockwise from the LED Module (D), and remove the
female wire (B) and O-Ring (C).
●Unscrew securing screws (F), remove the fixture cover (E), and screw the LED Module (D) to the mounting base
(A2) counterclockwise.
●Drill a hole into the wall and feed wire through the hole.
●Fix the mounting base (A2) to the surface with mounting screws (G) (the package does not include this
accessory).
●Connect fixture wires to main low voltage wire using outdoor rated waterproof (H) wire nuts.
●Then use securing screws (F) to attach the fixture cover (E) onto the mounting base (A2).
●The power wire can be fixed in a variety of ways on site. (See 3rd diagram above)
●For PRO modules, follow the instruction on our LumienPRO’s remote control.
