M-system R8 Series Bedienungsanleitung

MODEL: R8-NEIP1

R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 1/5

http://www.m-system.co.jp/

Remote I/O R8 Series

POWER/NETWORK MODULE

(EtherNet/IP)

Functions & Features

• Free combination of analog and discrete I/O

• Space-saving

Typical Applications

• Remote I/O for DCS and PLC

MODEL: R8–NEIP1–R[1]

ORDERING INFORMATION

• Code number: R8-NEIP1-R[1]

Specify a code from below for [1].

(e.g. R8-NEIP1-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

MODULE TYPE

NEIP1: EtherNet/IP

POWER INPUT

DC power

R: 24 V DC

(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• PC Configurator cable (model: COP-US)

• PC configurator software (model: R8CFG)

• EDS file

The EDS file and configurator software are downloadable at

M-System’s web site.

PACKAGE INCLUDES...

• Protective cover

GENERAL SPECIFICATIONS

Connection

• Power input or excitation supply: Tension clamp (Front

Twin connection)

Applicable wire size: 0.2 - 2.5 mm2

Stripped length: 10 mm

• EtherNet/IP: RJ-45 modular jack

• Internal bus or internal power or excitation supply: Via

internal bus connector

Max. number of I/O modules: 16

(Max. consumption current of I/O modules: 1.6 A)

Isolation: EtherNet/IP to internal bus or internal power or

power input to excitation supply to FE1

Status indicators: Power, RUN, MS, NS, LNK1, LNK2

Data allocation: Mode 1, 2

EtherNet/IP COMMUNICATION

Communication Standard: IEEE 802.3u

Transmission: 10BASE-T, 100BASE-TX

Baud rate: 10/100 Mbps (Auto Negotiation function)

Protocol: EtherNet/IP

Connection type: Exclusive owner / Listen only / Input only

Max. number of socket connections: 3

Transmission media: 10BASE-T (STP, Category 5), 100BASE-

TX (STP, Category 5e)

Network topology: Line, star and ring

Max. length of fieldbus segment: 100 meters

IP address: 192.168.0.250 (factory setting);

Only host address in IP address is configurable via rotary

switches, the other items via PC configurator software

(model: R8CFG).

DLR supported

Port No.: 2222, 44818

I/O data size: 40 - 140 byte (configurable with DIP SW)

Status indicator LEDs: MS, NS (Refer to the instruction

manual for details)

INSTALLATION

Power consumption

•DC: Approx. 12 W 24 V DC (@ internal power max. current

MODEL: R8-NEIP1

R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 2/5

http://www.m-system.co.jp/

1.6 A)

Internal power supply (power supply for I/O module):

• DC power supply: 5 V DC

• Current capacity: 1.6 A

Excitation supply output (excitation for I/O module)

•DC: 24 V DC ±10 %

•Operational current: 10 A

(From power supply (exitation supply) connector, via

connector for internal bus, supplied to each I/O module.

Power output current consumption must be under

operational current.)

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: DIN rail

Weight: 180 g (0.40 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(EthrtNet/IP to internal bus or internal power or power input

to excitation supply to FE1)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

MODEL: R8-NEIP1

R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 3/5

http://www.m-system.co.jp/

EXTERNAL VIEW

Status Indicator LED

Miniature Jack Connector

for Configuration

EtherNet/IP Communication

RJ-45 Modular Jack

Fixed Address Setting

Rotary SW

Internal Bus Connector

LNK2

LNK1 Power

RUN

LNK1

LNK2

SA X10

X100

On87654321Conﬁg

Function Setting

DIP SW

Connector for

Power Supply and

Excitation Supply

■STATUS INDICATOR LED

ID STATE COLOR TO INDICATE

Power ON Green Power supplied

RUN ON/Blink Green Turns on or blinks depending on the status

MS ON Green Normal operation

ON Red Critical failure

Blink Minor failure

NS On Green Connections are established

Blink Connections are not established

ON Red Critical Link failure

Blink Minor Link failure

LNK1 ON Green Link 1 is established

LNK2 ON Green Link 2 is established

CONNECTION DIAGRAMS

■POWER SUPPLY, EXCITATION SUPPLY CONNECTOR TERMINAL ASSIGNMENT

Printed-circuit board connector (Phoenix Contact)

Unit side connector: MSTBV2,5/5-GF-5,08AU

Cable side connector: TFKC2,5/5-STF-5,08AU

PIN ID FUNCTION

No.

1 24V Power supply 24V DC

2 0V Power supply 0V DC

3 + Excitation supply 24V DC

4 − Excitation supply 0V DC

5 FE1 Grounding

MODEL: R8-NEIP1

R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 4/5

http://www.m-system.co.jp/

EXTERNAL DIMENSIONS unit: mm [inch]

■UNIT

50 (1.97) [3 (.12)]

115 (4.53)[4 (.16)]

[7 (.28)]

55 (2.17)

DIN RAIL

(35 mm wide)

[4 (.16)]

■PROTECTIVE COVER

5 (.20) 50 (1.97)

115 (4.53)

MODEL: R8-NEIP1

R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 5/5

http://www.m-system.co.jp/

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FE1 terminal to ground.

Caution: FE1 terminal is NOT a protective conductor terminal.

+24V

FE1

POWER

EXC. SUPPLY

Comm.

Circuit

Control

Circuit

JACK

EtherNet/IP

Power

Circuit

(No isolation)

EXC. SUPPLY (24V)

INTERNAL

POWER (5V)

INTERNAL

BUS

ROTARY SW

DIP SW

Isolation

STATUS

IND.

BUS CONNECTOR

PC CONFIGURATION JACK

RJ-45 MODULAR JACK

CONNECTOR

Specifications are subject to change without notice.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere M-system E/A-System Handbücher

M-system

M-system R7M-MS4-R Bedienungsanleitung

M-system

M-system Devicenet R7F4HD-DA32B Bedienungsanleitung

M-system

M-system R6S-DA4 Bedienungsanleitung

M-system

M-system R7L-DAC16 Bedienungsanleitung

M-system

M-system R7F4HML3-D-DAC32B Bedienungsanleitung

M-system

M-system R80 Series Bedienungsanleitung

M-system

M-system R7L-SV4 Bedienungsanleitung

M-system

M-system R7ML-DC16A-R Bedienungsanleitung

M-system

M-system R30XN16A Bedienungsanleitung

M-system

M-system R30SV4 Bedienungsanleitung

M-system

M-system R30PA2 Bedienungsanleitung

M-system

M-system R3-DA8C Bedienungsanleitung

M-system

M-system R7G4FML3-6-DA16 Bedienungsanleitung

M-system

M-system R7F4HC-DC32A-K Bedienungsanleitung

M-system

M-system R7F4HC-DC32B-K Bedienungsanleitung

M-system

M-system Devicenet R7F4HD-DC32A Bedienungsanleitung

M-system

M-system R7I4DML3-DC32A Bedienungsanleitung

M-system

M-system R3-SV8A Bedienungsanleitung

M-system

M-system R7L-RS4-R Bedienungsanleitung

M-system

M-system R5T-RS Bedienungsanleitung

M-system

M-system R7F4HEIP-DAC16C Bedienungsanleitung

M-system

M-system R7F4HEIP-DAC16B Bedienungsanleitung

M-system

M-system MDR-8 Bedienungsanleitung

M-system

M-system R7ML-YS2-R Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

WAGO

WAGO I/O-SYSTEM 750 Bedienungsanleitung