M2TECH HiFace TWO Bedienungsanleitung
M2TECH
HI
FACE Two
192
K
H
Z
/24BIT DIGITAL AUDIO INTERFACE
USER MANUAL
REV. 1.0 – /2013
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
2
M2Tech
www.m2tech.biz
Warning!
Changes or modifications not authorized by the manufacturer can invalidate the
compliance to CE regulations and cause the unit to be no more suitable to use. The
manufacturer refuses every responsibility regarding damages to people or things
due to the use of a unit which has been subject to unauthorized modifications or to
misuse or to malfunction of a unit which has been subject to unauthorized
modifications.
This unit is compliant with the following CE regulations when an US cable less than 3m is used: CEI EN
55022:2009 Class (Radiated Emissions), CEI EN 55024:1999, CEI EN 55024:A2/2003, CEI EN
55024:IS1/2008 (Radio Frequency Electromagnetic Fields, 50Hz Magnetic Field Immunity Test and
Electrostatic Discharges – ESD).
Recycling
The label above, printed on the product case, indicates that the product, when no more usable, can’t be
treated as generic garbage, but must be disposed of at a collection point for recycling of electrical and
electronic equipment, in compliance with the WEEE regulation (Waste of Electrical and Electronic
Equipment).
y making sure that this unit is correctly recycled, you will help preventing potential damages to environment
and human health, which could be caused by a wrong treatment of this product as generic garbage.
Materials recycling helps saving natural resources. For more in-depth information about recycling this
product, please contact M2Tech Srl.
WARNING: the information contained in this manual are considered to be reliable and accurate.
2Tech reserves the right to change or modify the information any time, without prior advice. It’s up
to the customer to ensure that the manual being consulted is the latest version.
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
3
M2Tech
www.m2tech.biz
Dear customer,
thank you for purchasing hi
F
ace
T
wo. What you have is a first-rate US -to-S/PDIF
converter with many unique features conceived to obtain the best audio performance out
of a music file.
Even if getting digital music out of a PC, a Mac or a Linux computer is nowadays quite
simple, much harder is to obtain the best sonic performance from it, due to intrinsic limits
in US 1.1 audio standard and the implementation of digital audio interfaces in computers.
Please visit M2Tech website (www.m2tech.biz) to find extensive literature about this topic.
hi
F
ace
T
wo overcomes all the limits of usual US -to-audio interfaces by exploiting the
powerful performance allowed by US 2.0 Audio class and by using asynchronous data
transfer, along with a sophisticated electronic design.
hi
F
ace
T
wo is available with either RCA or true 75 Ohms output connector which suites
virtually all DAC’s and A/V receivers around.
We feel that your expectations will be fulfilled by hi
F
ace
T
wo: you’ll hear your DAC and
your music files in a way like never before, prepare for a whole new experience!
Nadia Marino, CEO
Please annotate here your hi
F
ace
T
wo serial number and purchase date for future
reference:
Serial number: ___________________________
Date of purchase: _________________________
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
4
M2Tech
www.m2tech.biz
INDEX
1. Connections ...................................................................................................................5
2. Connection to the host..................................................................................................6
3. True plug’n’play operation with ac............................................................................7
4. True plug’n’play operation with Linux .........................................................................9
5. Operation with iPad and Android-based tablets .......................................................10
5. Windows driver installation ........................................................................................11
5.1. Obtaining the driver .................................................................................................11
5.2. Installing the driver on a Windows-based PC (XP, Vista, Windows 7 and Windows
8, 32 & 64 bits) ...............................................................................................................11
5.2.1. Checking for right installation and trying the interface ......................................15
5.3. Unistalling the driver................................................................................................17
6. Configuring the computer to use hi
hihi
hiF
FF
Face
aceace
ace
T
TT
Two
wowo
wo ...........................................................20
6.1. Configuring a PC with Windows XP ........................................................................20
6.1.1. Configuring for Direct Sound with Windows XP................................................20
6.1.2. Configuring for ASIO with Windows XP ............................................................21
6.2. Configuring a PC with Windows Vista, Windows 7 or Windows 8 ...........................22
6.2.1. Configuring for Direct Sound with Windows Vista, Windows 7 or Windows 8...22
6.2.2. Configuring for Kernel Streaming with Windows Vista, Windows 7 or Windows 8
....................................................................................................................................23
6.2.3. Configuring for WASAPI with Windows Vista, Windows 7 or Windows 8 .........23
6.2.4. Configuring for ASIO with Windows Vista, Windows 7or Windows 8................23
7. Configuring the player for Kernel Streaming: two examples...................................24
7.1. Foo ar ....................................................................................................................24
7.2. Winamp and MediaMonkey.....................................................................................25
8. Configuring the player for WASAPI: two examples..................................................27
8.1. Foo ar ....................................................................................................................27
8.2. JRiver ......................................................................................................................28
9. Configuring the player for ASIO: an example ...........................................................28
9.1. Foo ar ....................................................................................................................28
10. Interface Special Features ........................................................................................30
10.1. Precision oscillators...............................................................................................30
10.2. Asynchronous transfer mode ................................................................................30
10.3. Output connector choice .......................................................................................30
10.4. Powering the hiFace Two with an external power supply .....................................30
11. Technical Specifications ...........................................................................................31
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
5
M2Tech
www.m2tech.biz
1. Connections
Figure 1
1) USB input. Connect directly to the US 3.0 or 2.0 or 1.1* port of a PC, Mac or Linux-
based computer, or use an US extender (A male to A female). In the latter, the extender
must be compliant with US 2.0 and less than 3m, otherwise the bus performance will
decrease and the correct operation of the interface will not be guaranteed. US type A
male connector
2) S/PDIF output. Connect to the DAC input with a 75 Ohms digital cable. RCA male
connector or NC 75 Ohms male connector.
* hi
F
ace
T
wo performance on US 1.1 are limited to 96kHz. Please note that 1.0 ports
won’t work.
1
2
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
6
M2Tech
www.m2tech.biz
2. Connection to the host
ADVICE: Windows users must install the driver prior to connecting the hiFace to the
PC (please refer to section 5).
Please refer to section 1, “Connections”.
Connect the hi
F
ace
T
wo to the host US 2.0 port by inserting its US plug (Figure 1, 1)
into the host socket. If straight insertion is difficult or when in need of avoiding straight
insertion, an US 2.0 extender cable (A male to A female) can be used. Please avoid
using extenders more than 4m, to avoid invalidating the bus performance.
If your computer has a Windows operating system and a driver hasn’t been installed prior
connecting the hi
F
ace
T
wo, an error message may appear and you may need to
disconnect the hi
F
ace
T
wo and install the driver (see section 5.3).
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
7
M2Tech
www.m2tech.biz
3. True plug’n’play operation with ac
Mac computers with OSX 10.6.4 and later have a native support for audio devices
compliant with US Audio Class 2.0. This means that the driver is already included in the
operating system and the user needs not to install anything: just connect the hi
F
ace
T
wo
to your Mac and it will be immediately recognized by the OS and ready to use. Macs with
older OS need update to use the hi
F
ace
T
wo.
To use hi
F
ace
T
wo as output device for your Mac, you need to select it as default output
device from the Audio Control Panel (Preferences -> Sound) as shown in Figure 2:
Figure 2
After selecting hi
F
ace
T
wo, please check settings, particularly the output sampling
frequency (Figure 3): that setting forces the sampling frequency for the hi
F
ace
T
wo,
regardless the native sampling frequency of the various tracks being played back (to get
rid of such unease operation mode, you may want to use a player which automatically
changes this setting based on each track’s native sampling frequency, Like Sonic Studio’s
Amarra or PureMusic).
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
8
M2Tech
www.m2tech.biz
Figure 3
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
9
M2Tech
www.m2tech.biz
4. True plug’n’play operation with Linux
Linux has a native support for audio devices compliant with US Audio Class 2.0 based on
ALSA. This means that the driver is already included in the operating system and the user
needs not to install anything: just connect the hi
F
ace
T
wo to your PC with Linux and it will
be immediately recognized by the OS and ready to use. ALSA version needs to be 1.0.24
or later.
To use hi
F
ace
T
wo as output device, select it as default output device for the system or
for the player you’re using.
hi
F
ace
T
wo
192
k
H
z
/24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
10
M2Tech
www.m2tech.biz
5. Operation with iPad and Android-based tablets
iPad also supports US Audio Class 2.0. This means that it is possible to connect the
hi
F
ace
T
wo to an iPad through the latter’s camera kit, which exports a high speed host
US port. The limited supply current required by the hi
F
ace
T
wo makes it possible to
power it even by the reduced current capabilities provided by the iPad.
Once the hi
F
ace
T
wo is connected, the iPad automatically set it as default output device.
Android tablets may potentially use the hi
F
ace
T
wo, provided they have a 2.0 or 1.1 US
host port capable of at least 100mA output current and ALSA or any other audio
management module compliant with US Audio Class 2.0. Please refer to the tablet’s
specification chart.
Inhaltsverzeichnis
Andere M2TECH Zubehör Handbücher
