Magnum MC-35A Technisches Datenblatt
Product instruction manual
Magnum MC-35A
The Magnum has been designed to be user friendly,
however we strongly recommend you take a few minutes
to read through this manual to ensure correct operation.
Keep this manual safe for future reference.
Auto creaser
2
MC-35A
Index
INTRODUCTION ............................................................................................. 1
1.1 Preface ................................................................................................. 1
1.2 Specification ......................................................................................... 2
2 SAFETY ......................................................................................................... 3
2.1 Environment .......................................................................................... 3
2.2 Do’s and Don’ts .................................................................................... 3
2.3 Operating Instructions ................................................................................. 4
3 MAIN PARTS AND ACESSORIES ................................................................ 6
4 INSTALLATION .............................................................................................. 8
4.1 Uninstall the protection bar ................................................................... 8
4.2 Set the balance bracket ........................................................................ 8
4.3 Output tray, stops and guides ............................................................... 8
4.4 Feeding extension ................................................................................ 9
4.5 Power socket and switch ...................................................................... 9
5 QUICK START ............................................................................................. 10
6 OPERATION ................................................................................................ 11
6.1 Control panel ...................................................................................... 11
6.2 Operation Screen ................................................................................ 12
6.3 Sniper Patent Technology .................................................................. 22
6.4 Hardware Settings .............................................................................. 23
7OPTIONAL PARTS ....................................................................................... 26
7.1 Slid-in Tools ........................................................................................ 26
7.2 Linear blade ........................................................................................ 27
MC-35A
Auto creaser
1
1 INTRODUCTION
1.1 Preface
This manual only applies to MC-35A Auto Creaser machine.
Before using the machine, please read the instruction manual carefully first.
Please keep the manual properly so that consulting it at any time in the future.
Any question while operating please contact our technicians.
Auto creaser
2
MC-35A
1.2 Specification
Paper thickness
60-400 gsm
Paper length 150-650mm
Paper width 140-330mm
Speed (One crease on A4): 75pcs/min (high)
Sniper Speed (One crease on A4): 50pcs/min (high)
Min crease gap 1mm
Min gap from leading edge to first crease +/-0.2mm
Crease qty in one pass 0 -32
Max program qty 30
Crease counting reversible counter
Total counter for crease qty and paper qty
Skew adjustment Standard
Crease depth adjustment Standard
Feeding extension table Standard
Output tray Standard
Language
/EN
Linear perforating max 8 set, min gap between 2 is 30mmOption
Linear scoring max 8 sets, min gap between 2 is 30mmOption
Linear half cutter max 8 sets, min gap between 2 is 30mmOption
Linear Slitter max 8 set, min gap between 2 is 40mmOption
Stand Option
Power 220V/50HZ/150W
Fuse rating 3.15A
Air blast Infinity adjustable
Weight 63kg (NG) 70kg(GW)
MC-35A
3
2 SAFETY
Before or while operating this machine, you should pay great attention to
the safety features.
2.1 Environment
Temperature：10°C to 35°C
Humidity: 30% to 70%
Altitude: Below elevation 1000m
There is no corrosiveness gas, flammable gas, oil mist and so on in room
Auto creaser
Auto creaser
4
MC-35A
2.3 Operating Instructions
English
Please read these operation instructions before putting the machine into operation
and observe the safety precautions.
Model: MC-35A
Input: 110V/220V
1. Children must not operate the machine!
2. Do not reach into the machine!
3. Long hair can become entangled in cutting head!
4. Take care of ties and other loose pieces of clothing!
5. Remove any paper clips!
6. Components which may endanger the operator are covered!
7. Connect the power cord to a single phase socket 230 V / 10 A.
8. Ensure free access to mains.
9. Disconnect from the mains if not used for a long period.
Auto creaser
5
MC-35A
10. Top fold plate must lock into position correctly.
11. Remove the plug before cleaning the machine! Do not perform any repairs on
the paper folding machine!
12．the socket-outlet shall be installed near the equipment and shall be easily
accessible.
–this equipment is not intended for use by children (the product is not a toy);
–avoid touching the document/media feed opening with the hands;
–avoid clothing touching the document/media feed opening;
–avoid hair touching the document/media feed opening; and
–keep aerosol products away [for equipment incorporating a universal (brush)
motor only].
Be careful of any metal or flammable thing in internal machine, or it may cause fire
or electronic shock. If it happens, first shut down the power, disconnect the cord,
and then contact the technician.
If machine becomes heat, smoke, or smelly, shutdown at once, disconnecting the
cord, and contact the maintenance staff.
Franch
Veuillez lire ces instructions d'utilisation avant de mettre la machine en marche et
respectez les consignes de sécurité.
Modèle:MC-35A
Entrée: 110 V / 220 V
1. Les enfants ne doivent pas utiliser la machine!
2. Ne pas atteindre dans la machine!
3. Les cheveux longs peuvent s'emmêler dans la tête de coupe!
4. Prenez soin des cravates et des autres vêtements amples!
5. Retirez tous les trombones!
6. Les composants pouvant mettre en danger l'opérateur sont couverts!
7. Connectez le cordon d'alimentation à une prise monophasée 230 V / 10 A.
8. Assurer un accès libre au secteur.
9. Débranchez du secteur s'il n'est pas utilisé pendant une longue période.
10. La plaque de pliage supérieure doit se verrouiller correctement.
11. Retirez la prise avant de nettoyer la machine! N'effectuez aucune réparation sur
la machine à plier le papier!
12.la prise de courant doit être installée à proximité de l'équipement et doit être
facilement accessible.
-cet équipement n'est pas destiné à être utilisé par des enfants (le produit n'est pas
un jouet);
-évitez de toucher l'ouverture du document / support d'alimentation avec les mains;
-éviter que les vêtements ne touchent l'ouverture du flux de documents / supports;
-éviter que les cheveux ne touchent l'ouverture du flux de documents / supports; et
-conserver les produits aérosols à l'écart [pour les équipements intégrant
uniquement un moteur (à brosse) universel].
Faites attention à tout objet métallique ou inflammable dans la machine interne, ou
cela pourrait provoquer un incendie ou un choc électrique. Si cela se produit,
coupez d'abord l'alimentation, débranchez le cordon, puis contactez le technicien.
Si la machine devient chaude, fume ou malodorante, arrêtez-la immédiatement,
débranchez le cordon et contactez le personnel de maintenance.
Auto creaser
6
MC-35A
3 MAIN PARTS AND ACCESSORIES
25 26 27 28
24 23 22
21 20 19 18 1716 15 14 13 10 11 12
9
1 8
7
6
5
2
3 4
No.
Parts
Description
1
Slide-in bar lock Locks the tool in position
2
Slide-in bar
Could be crease bar or perforate bar
3
Screw
To assist user slid in/out the tool
4
Optional Stand
Option with caster
5
Power socket
Mains lead socket
6
Power switch
Power On/off
7
Loading table
To load sheets
8
Back Stop Rear paper guide
9
Fixed Side guide
With skew adjustment
Auto creaser
7
MC-35A
10
Air gate
Infinity adjust to control air flow
11
Front guide
sheet feed with double sheet detector
12
Skew adjust wheel
To change the angle of fixed side guide
13
Press wheel
To press the paper tail
14
Stack height sensor
To trigger the feeding job after loading table rise
15
Vacuum feed system
Blow to make vacuum and feeder
16
Front guide knob
To adjust the height of front guide
17
Blower knob
To adjust the air flow
18
Press plate
To press the paper when it is feeding
19
Control panel
To input and display
20
Side guide -exit tray
21
Output tray
Sheet collection tray
22
Clip
Release to uninstall the shaft
23
Outfeed shaft
Clip for rear shafts
24
Outfeed counter roller
Work together with Linear tools
25
Depth adjust screw
To adjust the depth or crease or perforate
26
Roller screw
To adjust the depth of linear tools
27
Linear tools
Roller, scorer, kiss cutter,slitter or perfoater
28
Installing bar
To install the slid-in tool
Auto creaser
8
MC-35A
4 INSTALLATION
4.1 Uninstall the protection bar
Protection
bar
The first thing after unpacking and putting machine on table is to uninstall
the protection bar.
4.2 Set the balance bracket
Balance bracket
Please be careful of the bracket from your hand when you are moving it to the
stand. Inset screw drive through the hole in red cycle, release the bracket to
fall, and then set them again.
4.3 Output tray, stops and guides
Unpack it , install the parts as per above illustration.
Note:!Set! guide!and!stops!according!to!the!paper!format.!
The!capacity!of!the!tray!should!always!less!than!30mm(A3!)!to!keep!machine!balance.!
Side guide R/H Side guide L/H
Joint of tray
and machine
Output tray
Back stop
Extensio
n tray
Inhaltsverzeichnis
Andere Magnum Bindemaschine Handbücher
Magnum
Magnum MCC-35ASP Technisches Datenblatt
Magnum
Magnum iBind A20 Bedienungsanleitung
Magnum
Magnum MEC21 Technisches Datenblatt
Magnum
Magnum MEC46 Technisches Datenblatt
Magnum
Magnum MC-35M Technisches Datenblatt
Magnum
Magnum MCR-46 Betriebshandbuch
Magnum
Magnum MCC-35 Technisches Datenblatt
Magnum
Magnum MCR-35 Technisches Datenblatt
Magnum
Magnum MCPF-35 Technisches Datenblatt
