Majestic ONE PU Bedienungsanleitung
USER GUIDE
Warning
When you use your board you are exposed
to numerous risks of the obstacles encountered
on the road, collisions, fallsand loss of control
over the board.
Read this user guide carefully before using
the electric longboard.
Product is intended for people over
14 years of age.
Informaon 5
Safety rules 6
Take care of your longboard 8
Specicaon 10
Electric parts 11
Longboard parts 12
Longboard parameters 12
Replacing wheels to All Terrain 14
Replacement of PU wheels 17
Remotecontrolfuncons 20
Start•Poweron/otheremote•Sengs 21
Remote-boardpairing•Breakingremote-boardconnecon 22
Braking mode level • Changing the riding mode 23
Remotecalibraon•Movingforwards/backwards 24
Baeryvoltage•Settingspeedunits 25
Wheel size 26
Instruconsforbeginners•Preparingforaride 27
Return of ordered products 29
Manufacturerguarantee 30
CONTENTS
5
INFORMATION
The buyer will use the equipment on their own responsibility
and at his own risk and hewaives any claims, including recourse, against
the manufacturer/seller that may arise in connecon with the incorrect
use of equipment, especially use contradictory with the purpose
of the product by the buyer and the people to whom he makes
the product available for use, including waiving any claims against
the producer/seller due to an accident and related damage to health
and suered damage caused by improper/unskilful use of the equipment
hebought.
The product is an electrical device. Do not dispose as unsorted municipal wa-
ste.Returnonlytoaceredpointofwastecolleconorreturntotheprodu-
cer.Donotthrowinthere.Donotburn.Donotexposetointensesolarradia-
on.Donotexposetotemperaturesabove50°C.Donotdisposeinwateror
watertanks.Fordetailedinformaonontherecyclingofthedeviceorbaery,
pleasecontactyourlocalcitycouncil,thecompanyexporngmunicipalwaste
or producer (or store in which the product was purchased).
76
1. Alwaysridecarefully,complyingwithtracregulaons.
2. While longboarding, you should avoid:
SAFETY RULES
3. The control is carried out using wireless technology Bluetooth, which
waves may be distorted when using the device. Avoid riding in places
wherecommunicaonlosscouldbedangerous.
4. Never unscrew the electronic parts of the longboard. Opening
thebaerycoverisatriskofelectricshockandmayvoidyourwarranty
(exceptreplacementofabaerypurchasedfromthemanufacturer
ofelectricallongboardsMajescBoards).
5. Keepyourngers,clothesandhairawayfrommovableparts
of the board, i.e. a strap, motor or wheels.
6. Duringtheridethereisapossibilityofsmallobjectsgengintothe
drive belts that may block the engine.
7. One of the mistakes that causes the board to crash is driving down
steep hills and hard braking. This causes damage to the motor!
8. ElectroniclongboardcomponentshaveIP54proteconlevel,which
means that they are resistant to drops of water falling at any angle, on all
sidesandonobjectsover1mm.
9. Alwayswearahelmetandprotecveclothingforyourownsafetywhile
driving on an electric longboard. Do not ride in busy roads or do not
leavebrakingunlthelastmoment.
You should always wear
ahelmetandprotecve
clothing while riding.
gravel water steep uphill or downhill
roads
holes and
crackings
large rocks tracks trac night
drains
obstacles poor
visibility
These factors may cause
damage to the electric longboard
and they can create security risk for
the user.
98
TAKE CARE OF YOUR LONGBOARD
1. Regularly inspect your boards from damage and check that it is running
properly.
2. Beforeridingmakesureallscrewsareght.
3. Do not clean the board with harsh abrasives or chemicals; use a semi-
dampclothtowipeodustanddirtfromboardandwheels.
4. Turnotheboardandremotecontrolwhennotinuse.
5. Keepyourboardbaery50%chargedwhennotinuse.
6. Rechargethebaeryevery3monthswhennotinuse.
7. Donotleavethechargingboardunaended.
8. Disconnectthebaeryfromchargeronceitisfullycharged.
9. Do not leave the boards in a hot car.
10. Donotexposetheboardtoatemperatureabove50°C-itmayresult
in a loss of warranty.
11. Before each ride on the electric longboard, make sure all the screws are
properlyscrewed.Incaseofloosening,screwsshouldbeghtened.
12. Donotstorethelongboardinhumidcondions.
BATTERYINFORMATION
• Keep the battery half-charged when it is not longer used.
• Keep the battery fully charged for a maximum of two weeks.
• Lithium-ion battery does not require "formatting" - you do not need to
rechargeitsupto100%andunloadto"zero".
• It is better to charge the battery more often than to unload it to "zero" - it
will extend the battery life.
• Donotkeepintemperatureshigherthan50°C(122°F).
• The battery can be discharged to -20° C, but it must be charged
ataminimumof10°C(32°F).
• Longboard should be stored in dry conditions and at a positive
temperature.
• The battery used in the board should come only from the manufacturer
of electric longboards - Majestic Boards. Using other batteries results
in the loss of guarantee.
• The condition for recognizing the warranty is providing the proof
of purchase along with the product.
1110
USB Port
Power Button
Charging Port
Skateboard
Deck
Motor controller
Front Wheels
Brushless
Motors
Drive Belts
Motor Mounts
BushingsBushings
Rear Wheels
Motor Caps Motors
Brushless
rBattery cove
Front Truck
• Electric parts
Motor
1200W (total power in version with two 2400W motors)
Brushless
Baery
11.8 Ah
Lithium-ion
Voltage 21,6 V
Charger
Powered by 100-240V AC,
networkfrequency50/60HZ
Remotecontrol
2,4GHz
Bluetooth
USB charging port
SPECIFICATION
WARNING!
Do not attempt to open the control board cover
in the board - the repair can only be done
by an authorized service.
Lightsindicangthebaerychargelevelarelocatedonthecontrol
boardcover.Alllightsareglowinggreenwhenthebaeryisfully
charged,theystartswitchingoonebyonewhenthechargelevel
is dropping. The last remaining light is always glowing red.
1312
• Longboard parts
Deck
Length – 90 cm
Width – 23 cm
Construcon–5layersofbambooand2layersofglassbre
Shape – Twin + Concave
• Longboard parameters
SPECIFICATION
MAJESTIC►ONEPU ONEAT PROPU PROAT
Max.range(km) 42 25 32 20
Max.range+*(km) 84 50 64 40
Max.speed(km/h) 35 25 40 30
Max.load(kg) 100 100 110 110
Chargeme(h) 2,5/4 2,5/4 2,5/4 2,5/4
Power(W) 1200 1200 2400 2400
No.ofMotors 1 1 2 2
MAJESTIC►ONEPU ONEAT PROPU PROAT
Weight(kg) 7,2 8,2 8,2 9,8
Decksize 90 x 23 90 x 23 90 x 23 90 x 23
Wheelsize 80/97 mm 7′pumped 80/97 mm 7′pumped
Rims -Original
Majesc -Original
Majesc
Trucks E-Carve E-Carve E-Carve E-Carve
Max.slope(%) 20 20 25 25
Warranty 2 years 2 years 2 years 2 years
Changeablewheels Yes Yes Yes Yes
F-Change
Technology** Yes Yes Ye s Ye s
Choosecolorofyour
board Yes Yes Yes Ye s
RemoteLCD Yes Ye s Ye s Yes
Addsecondmotor Yes Yes - -
Compabilitywith
futureupgrades Yes Yes Yes Ye s
Priceinshop 1049 USD 1149 USD 1249 USD 1399 USD
*rangewithextendedbaery
** change your wheels from AT to PU in 2 minutes!
1514
• Replacing wheels to All Terrain
1.Replacingthewheelwithoutadrive
a) usingtheT-Toolprovidedwiththeset,unscrewthenutxingthePU
wheel.
b) remove the spacer from the PU wheel.
c) pullothePUwheel.
d) check if the second distance washer is on the hanger's axis, if so leave it
inplace,ifnot,youcanprobablynditonthePUwheelbearing-putit
on the axle.
e) put the AT wheel on the axle so that the bearing located inside the rim
would be located on the outside.
f) put the spacer on the hanger's axis.
g) screw the nut so that the wheel does not slack and rotates freely
on the axis.
2.Replacingthedrivewheel
a) use the included small Torx key to unscrew drive belt cover.
b) using small Torx key loosen 4 screws securing the motor (loosen, do not
unscrew).Movethemotordownalongthegroovesinthemount.
c) usingtheT-Toolprovidedwiththeset,unscrewthenutxingthePU
wheel.
d) remove the spacer from the PU wheel.
e) pullothePUwheelalongwiththegearrack,largebearingandtoothed
belt.
f) puttwo25mmpadsonthehanger.
g) put the large drive belt on the hanger, so it hangs on it freely.
h) put the AT wheel with a toothed wheel and a large bearing on top of it
on the hanger's axis.
i) hitthewheellightlywithyourhandunlitclicksintoplace.Ifitdoesnot
fullyt,itwillaerghteningthenutontheaxle.
j) put the spacer on the hanger's axis.
k) screw the nut so that the wheel does not slack and rotates freely on the
axis.Ifthewheelisn'tintheproperposionyet,ghtenthenutunl
everythingts.Aerngunscrewthenutslightlysothatthewheel
can rotate freely.
l) put the drive belt on the large gear next to the AT wheel and on the
small gear wheel of the engine.
SPECIFICATION
Tools needed: T-Tool, Torx key 4
The AT set contains:
• 4 AT wheels (set consisting of rims, tires, inner tubes of small bearings)
Instruconalvideosavailableatproducent'swebsite.
• large sprocket
• large bearing
• toothed belt
• distance pads
1716
SPECIFICATION
• Replacement of PU wheels
1.Replacementofwheelswithoutadrive
a) unscrewthenutxingthePUwheelusingtheT-Toolprovidedwiththe
set.
b) remove the spacer from the PU wheel.
c) pullothePUwheel.
d) check if the second distance washer is on the hanger's axis, if so leave it
inplace,ifnot,youcanprobablynditonthePUwheelbearing-putit
on the axle.
e) put on the PU wheel.
f) put the spacer on the hanger's axis.
g) screw the nut/cap so that the wheel does not slack and rotates freely on
the axis.
WARNING!
When replacing wheels from AT to PU and from PU to
AT, replace the self-locking nuts fixing the wheels on
the axis of the hanger or use an anaerobic adhesive for
safe tightening of the wheels.
2.Replacementofdrivewheels
a) use the included small Allen key to unscrew drive belt cover.
b) unscrewthenutxingthePUwheelusingtheT-Toolprovidedwiththe
set.
c) remove the spacer from the PU wheel.
m) grasp the engine with one hand, move it upwards so that the toothed
beltisstretched.Usesmallforce.Withtheotherhand,ghtenthe4
screwsxingtheenginewithasmallTorxkey.Thestrapshouldbend
lightlyunderthepressureofthenger,andthewheelshouldrotate
without much resistance. (Important! The engine mount should be
ghtenedonlywithamatchingTorxkeyfromtheset,inserngittothe
endandghtenitwithsensivitysothatyoudon'ttwistit).
3.Checkifthemotoranddriveareworkingcorrectlywithoutgengonthe
board.
4. If the engine and drive are working properly, you can drive!
1918
d) pullothePUwheel.
Duetothengoftheparts,youneedtopullothedrivewheelusing
more strength. Relax - nothing will go wrong ;)
1)Onlythewheelhasbeenpulledo-leavetherackinplaceandpress
the PU wheel with bearings on top of the set. (go to point "e" and
then "g")
2)Thewheelhasbeenpulledoalongwiththegear:
• the large bearing remains in the rack - leave it in place
• the large bearing is located on the hanger bushing - leave it in place
• remove the gear manually and then press it into the new PU wheel.
e) put a PU wheel with a sprocket and a large bearing on it on the hanger's
axis.
f) hitthewheellightlywithyourhandunlitclicksintoplace.Ifitdoesnot
fullyt,itwillaerghteningthenutontheaxle.
g) put the drive belt on the wheel sprocket and engine sprocket. Do not
unscrewtheengine.Aachthestrapinthesamewayasyouaacha
bikechain.Thebeltshouldnotbetooghtorloose.Thewheelmust
rotate easily while driving it with the remote control.
h) put the distance washer on the hanger's axis.
i) screw the nut so that the wheel does not slack and rotates freely on the
axis.Ifthewheelisn'tintheproperposionyet,ghtenthenutunl
everythingts.Aerngunscrewthenutslightlysothatthewheel
can rotate freely.
j) fasten the engine rack cover using the included key.
Before driving, make sure that all wheel bolts are located in the right place.
Warning
1. Do not use polyurethane wheels for paving stones surfaces, for this type
ofsurfacealwaysuseo-road(AT)wheels.
2. Storingthewheelsabove40°Cmaycausethemtobedistorted.
Distortedwheelsstoredabovethepermiedtemperaturearenotcove-
red by the warranty.
3. O-roadwheelsshouldbepumpeduptoamaximum
of2,5atmospheres.
4. When replacing wheels with AT on PU and PU on AT, replace
theself-lockingnutsxingthewheelsonthehanger'saxisoruse
ananaerobicadhesivetosafelyghtenthewheels.
SPECIFICATION
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Majestic Andere Handbücher
