Major tech MTi13 Bedienungsanleitung

INSTRUCTION MANUAL

80 x 80 Pixels

Thermal Imager

MTi13

Contents Page no

1. Introduction..........................................................................................5

2. Safety Information.................................................................................5

3. Specifications........................................................................................7

4. Structure Description..............................................................................9

5. Before you start....................................................................................10

5.1 How to charge the battery...........................................................10

5.2 Power On..................................................................................10

5.3 Power Off..................................................................................11

5.4 Desktop....................................................................................11

5.5 Shutter......................................................................................12

5.6 Temperature Measurement.........................................................12

5.7 Emissitivity Adjustment..............................................................12

5.8 Reflective Temperature...............................................................13

5.9 Thermal Imager Reporter Software..............................................13

6. Menus.................................................................................................14

6.1 Main Menu................................................................................14

6.2 Image Mode..............................................................................14

6.3 Image Palette............................................................................16

6.4 Image Adjustment.....................................................................18

6.4.1 Lock Operation..................................................................18

6.4.2 Histogram Mode and Auto Mode..........................................19

6.5 Measurement Menu...................................................................19

6.6 Parameter Menu........................................................................20

6.6.1 Ambient Temperature Composation....................................20

6.6.2 Reflective Temperature......................................................20

6.6.3 Atmospheric Humidity.......................................................21

6.6.4 Delta Temperature Compensation.......................................21

6.6.5 Distance..........................................................................21

6.6.6 Emissivity.........................................................................22

6.7 Settings Menu............................................................................22

6.7.1 Device Settings.................................................................22

6.7.2 Measure Settings..............................................................24

6.7.3 Reset...............................................................................26

Contents Page no

6.8 Camera Menu............................................................................27

6.8.1 Save Image.....................................................................27

6.8.2 Add Text Note..................................................................27

6.8.3 Change Measure Parameters.............................................27

6.8.4 Add Analyse Tools.............................................................28

6.8.5 Change Image Mode.........................................................28

6.8.6 Change Colour..................................................................28

6.9 Video Menu...............................................................................28

6.10 Files browser.............................................................................29

6.10.1 Analyse an Image...........................................................29

6.10.2 Play a Video...................................................................29

6.10.3 View Image Info.............................................................30

6.10.4 Delete File.....................................................................30

6.11 USB Mode.................................................................................30

8. Fault Diagnosis and Exclusion.................................................................30

8. Android/iOS APP Thermview..................................................................31

8.1 Software Install and Uninstall..........................................................31

8.1.1 System Required..................................................................31

8.1.2 Thermview App Install...........................................................31

8.2 Thermview Function.......................................................................31

8.2.1 Import Pictures.....................................................................31

8.2.2 Analyse...............................................................................32

8.2.3 Report and Share..................................................................33

9. PC Software.........................................................................................34

9.1 System Required..........................................................................34

9.2 IR Meter Install............................................................................34

9.3 Running......................................................................................34

9.4 Uninstall......................................................................................34

1. lntroduction

• The Thermal lmager is a hand held imaging camera used for predictive

maintenance, equipment troubleshooting and verification.

• Focus the lens to the object, then the thermal and visual images are

displayed on the LCD and can be saved to a Micro SD Memory card.

• Transferring images to a PC is accomplished by removing the SD memory

card and connecting it to a PC through a card reader (not included), or

transfer the images and video stream to the smart device with

"Thermoview" apps installed.

• In addition to the features mentioned above, the Thermal lmager

provides video recording and play back

1. Safety Information

• To prevent eye damage and personal injury, do not look into the laser. Do

not point the laser directly at people or animals or indirectly off reflective

surfaces.

• Do not disassemble or do a modification to the Thermal Imager.

• Do not point the Thermal Imager (with or without the lens cover) at

intensive energy sources, for example devices that emit laser radiation, or

the sun.

• This can have an unwanted effect on the accuracy of the camera. It can

also cause damage to the detector in the Thermal Imager.

• Do not use the Thermal Imager in a temperature higher than 50°C

(122°F), lower than -20°C (-4°F), High temperature or low temperature

can cause damage to the Thermal Imager.

• Only use the correct equipment to discharge the battery.

• If you do not use the correct equipment, you can decrease the

performance or the life cycle of the battery. If you do not use the correct

equipment, an incorrect flow of current to the battery can occur. This can

cause the battery to become hot, or cause an explosion and injure the

user.

• Do not pull out the battery when the thermal imager is working.

• If you pull out the battery when the thermal imager is working, it may

cause the thermal imager to work erroneously.

• Do not disassemble or do a modification to the battery.

• The battery contains safety and protection devices which, if they become

damaged, can cause the battery to become hot, or cause an explosion or

an ignition.

• If there is a leak from the battery and the fluid gets into your eyes, do

not rub your eyes. Flush well with water and immediately get medical

care.

• Do not make holes in the battery with objects. Do not hit the battery with

a hammer. Do not step on the battery, or apply strong impacts or shocks

to it.

• Do not put the battery in or near a fire, or in direct sunlight, or other

high-temperature locations. Do not solder directly onto the battery.

• Always charge the battery in the specified temperature range.

• The temperature range through which you can charge the battery is 0 to

50°C (32 to 122°F). If you charge the battery at temperatures out of this

range, it can cause the battery to become hot or to break, It can also

decrease the performance or the life cycle of the battery.

• Do not get water or salt water on the battery, or permit the battery to get

wet.

• Clean the case with a damp cloth and a weak soap solution. Do not use

abrasives, isopropyl alcohol, or solvents to clean the case or lens/screen.

• Be careful when you clean the infrared lens. Do not clean the infrared

lens too vigorously, This can damage the anti-reflective coating.

• Taking the Thermal Imager from cold to hot may cause condensation in

the thermal Imager. To protect the Thermal Imager, you should switch off

the Thermal Imager, wait until the Thermal Imager has become warm

enough for the condensation to evaporate.

• If you do not use the Thermal Imager, put the Thermal Imager in cool

and dry environment. If you store the Thermal Imager with the battery

inserted, the power of the battery will be depleted.

Imaging and Optical Data

Field of View(FOV)/Minimum

Focus Distance 21°x 21°/0.5m

Spatial Resolution(IFOV) 4.53mrad

Thermal Sensitivity/NETD <0.05°C at 30°C (86°F) / 50mK

Image Frequency 50Hz

Focus Mode Manual

Zoom 1-16x continuous, digital zoom

Focal Length 7.5mm

Focal Plane Array(FPA)/Spectral

Range Uncooled microbolometer / 8-14μm

IR Resolution 80 x 80 pixels

Image Presentation

Display 3.5in. LCD, 640x480 pixels, Touch

screen

Image Modes IR image, Visual image, Picture in

picture, Auto fusion, zoom.

Color Palettes IRON, Rainbow, Grey, Grey Inverted,

Brown, Blue-red, Hot-cold, Feather,

Above alarm, Below alarm, Zone

alarm, Vision zone.

Measurement

Object Temperature Range -20 to 150°C (-4 to 302°F) /

0 to 650°C (32 to 1202°F)

Temperature Accuracy ±2°C (3.6°F) or ±2% of reading

(Environment temperature 10 to

35°C, Object temperature >0°C)

Measurement Analysis

Spot Center Spot, Three manual spots

Automatic Hot/Cold Detection Auto hot or cold markers

Line Two lines analyse

Area Three areas analyse

Measurement Corrections Emissivity, Reflected temperature

Storage of Videos

Storage Media 8GB Micro SD card or 3.4GB internal

EMMC

Video Storage Format Standard MPEG-4 encode, 640x480 at

30fps, on memory card >60 minutes

Video Storage Mode IR/visual images; simultaneous

storage of IR and visual images

3. Specifications

Function Range

Storage of Images

Image Storage Format Standard JPEG, or HIR files including

measurement data, on memory card

>6000 pictures

Image Storage Mode IR/visual images; simultaneous

storage of IR and visual images

Image Analyse Internal image analyse tools.

Complete function

Set-Up

Set-up commands Local adaptation of units, language,

date and time formats, information of

camera

Languages Multinational

Digital Camera

Built-in Digital Camera 2 Megapixels

Built-in Digital Lens Data FOV 65°

Data Communication Interfaces

Interfaces USB-Type C

USB Data transform between camera and

PC; Live video between camera & PC

Wifi 802.11, transfer images and realtime

video stream

Power System

Battery Li-ion battery, 4 hours operating time

Input Voltage DC 5V

Charging System In camera (AC adapter)

Power Management Automatic shutdown

Environmental Data

Operating Temperature Range -15 to 50°C (5 to 122°F)

Storage Temperature Range -40 to 70°C (-40 to 158°F)

Humidity (Operating and Storage) 10% to 90%

Drop Test 2m

Bump 25g (I EC60068-2-29)

Vibration 2g (IEC60068-2-6)

Physical Data

Camera Weight. Incl. Battery <500g

Camera Size (L x W x H) 224 x 77 x 96mm

3. Specifications Continued

Function Range

4. Structure Description

1 - Visual Camera

2 - lnfrared Camera Lens

3 - Dust Cover Lanyard Hole

4 - Trigger

5 - lnterface and Cover

5.1 - Type-C USB/Charge

5.2 - Micro SD Card Slot

6 - LCD Display and Touch Screen

7 - lmages Browse Button

8 - Power/Lock Button

9 - Menu/Select Button

10 - Up/Down/Right/Left Button

11 - Battery

12 - Triangular Bracket Fixed Hole

5. Before You Start

5.1. How to Charge the Battery

• Before you use the Thermal Imager for the first time, charge the battery

for three and a half hours.

• The battery status shows on the six-segment charge indicator.

• To charge the battery, use follow before:

1. Connect the AC power adapter into an AC wall outlet and connect the

DC output to the Thermal Imager’s AC power socket. The charge light

is on, The battery indicator becomes " " while the

battery charges with the AC power adapter.

2. Charge until the charge indicator becomes " " the charge icon will not

change.

3. Disconnect AC power adapter when the battery is fully charged.

Note: Make sure that the Thermal Imager is near room temperature before

you connect it to the charger. Do not charge in hot or cold areas. When you

charge in extreme temperature, battery capacity may be damaged.

5.2. Power On

To turn the Thermal Imager on, push the Power/Lock " " Button for

about 2 seconds.

Note: After turning on the device, the thermal Imager needs sufficient

warm-up time for the most accurate temperature measurements and best

image quality. So the visible image will first appear, and the thermal sensor

will calibrate internal for several seconds. After that the thermal image will

be displayed on the screen.

Inhaltsverzeichnis

Andere Major tech Laborausrüstung Handbücher

Major tech

Major tech MTi15 Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung