Major tech MT950 Bedienungsanleitung

INSTRUCTION MANUAL

MT950

NON-CONTACT TACHOMETER

Warning

To avoid injuries to animal or human eyes, please do not point the laser beam

in eyes or look directly into beam. If the instrument is not to be used for any

extended period, remove the battery.

Features

1. Provides fast and accurate non-contact RPM and surface speed

measurements of rotating objects.

2. Uses the CPU technique, photoelectrical technique, and junction laser

technique for one instrument combined PHOTO TACH. (RPM&REV)

3. Two test modes: rotate speed mode (unit: RPM) & count mode (unit:

REV)

4. Wide measure range and high resolution.

5. High visible digital LCD and Backlight display.

6. Built-in memory recalls Max Min and Last value stored.

Specifications

Display

5 digits LCD display

Accuracy

±(0.05% + 1 digits)

RPM Test Range

2 to 99,999 RPM

Count Range

1 to 99,999 REV

Resolution 0.1 RPM (2 to 999.9 RPM)

1 RPM. (over 1000 RPM)

Sampling Time

0.5 seconds (over 120 RPM)

Detecting Distance

50mm to 500mm

Time Base

Quartz crystal

Power Consumption

Approx. 45mA

Battery

9V or 6V Exterior DC

Operation Temp

0℃to 50℃

Dimension

160 x 58 x 39mm

Weight

151g

Measuring Manual

Apply a reflective mark to the object being measured. Hold down the MEAS

button and align the visible light beam with the applied target. Verify that

monitor indicator lights when the target aligns with the beam. The meter turns

on with the previously used mode. If you need to change the mode, release the

MEAS button and press the MODE button to change between RPM and REV.

Hold down MEAS to activate the new mode. The instrument auto powers off in

10 sec after releasing the MEAS button. Press the MEM button to recall the

last measurement readings for the Max, Min and Last value.

Measuring Considerations

1. Reflective Mark

•Cut the adhesive tap provide into approx. 12mm (0.5″) squares and

apply one square to each rotation shaft.

•The non-reflective area must always be greater than the reflective area.

•If the shaft is normally reflective, it must be covered with black tape or

black paint before attaching reflective tape

•Shaft surface must be clean and smooth before applying reflective tape.

2. Very Low RPM Measurement

•As it is easy to get high resolution and fast sampling time, if measuring

the very low RPM values, suggest user to attach more “REFLECTIVE

MARKS” averagely. Then divide the reading shown by the number of

“REFLECTIVE MARKS” averagely. Then divide the reading shown by the

number of “REFLECTIVE MARKS” to get the real RPM

Inhaltsverzeichnis

Andere Major tech Messgerät Handbücher

Major tech

Major tech MTD70T Bedienungsanleitung

Major tech

Major tech MT782 Bedienungsanleitung

Major tech

Major tech MT730 Bedienungsanleitung

Major tech

Major tech MT941 Bedienungsanleitung

Major tech

Major tech MT920 Bedienungsanleitung

Major tech

Major tech MT713 Bedienungsanleitung

Major tech

Major tech MT 770 Bedienungsanleitung

Major tech

Major tech MT720 Bedienungsanleitung

Major tech

Major tech MT26 Bedienungsanleitung

Major tech

Major tech MT960 Bedienungsanleitung

Major tech

Major tech MT775 Bedienungsanleitung

Major tech

Major tech MT874 Bedienungsanleitung

Major tech

Major tech MT941 Bedienungsanleitung

Major tech

Major tech MT150 Bedienungsanleitung

Major tech

Major tech MT785 Bedienungsanleitung

Major tech

Major tech MT402 Bedienungsanleitung

Major tech

Major tech MT350 Bedienungsanleitung

Major tech

Major tech MT957 Bedienungsanleitung

Major tech

Major tech MT876 Bedienungsanleitung

Major tech

Major tech MT145 Bedienungsanleitung

Major tech

Major tech MT760 Bedienungsanleitung

Major tech

Major tech MT767 Bedienungsanleitung

Major tech

Major tech MT91 Bedienungsanleitung

Major tech

Major tech MT784 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung