Marcy XC-50 Bedienungsanleitung

19/10/2009-1

2 in 1 Cycle Elliptical

Product Code: XC-50

Contents

Important Safety Information

Weight Limit Capacities

Hardware Parts List

Pre Assembly Check List

Assembly Instructions

User Guide

Computer Instructions

Exercise Instructions

Fault Finding Chart

Exploded Diagram

Parts List

Additional Information

Care Maintenance

Limited Warranty / Customer Services

Supplied by

Escalade International Ltd

Pleasant Road

Penllergaer

Swansea

SA4 9GE

Tel: 00 44 1792 222550

Fax: 00 44 1792 895781

www.escaladesports.co.uk

E mail: info@escaladesports.co.uk

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING

1. This 2 in 1 trainer is intended for class H (H=Domestic) use only. It is not designed for

commercial use.

2. This machine has been tested to BS EN 957.

3. Read the OWNER’S OPERATION MANUAL and all accompanying literature and follow it

carefully before using your 2 in 1 trainer.

4. Keep children and pets away from the 2 in 1 trainer at all times. Do not leave children unattended

in the same room with the 2 in 1 trainer. The 2 in 1 trainer is not a toy and therefore parents and

guardians should be aware of the natural tendency for children to play, leading to situations and

behaviour for which the 2 in 1 trainer is not intended.

5. If children are allowed to use the 2 in 1 trainer their physical/mental development and above all,

temperament should be taken into account. Constant supervision is therefore needed.

6. Position the 2 in 1 trainer on a clear levelled surface which is clear of all obstacles as not to

restrict movement whilst exercising. DO NOT use the 2 in 1 trainer near water or outdoors.

7. Exercise equipment has moving parts. In the interest of safety, keep others, especially children,

at a safe distance while exercising.

8. Never hold your breath while exercising. Breathing should remain at a normal rate in conjunction

with the level of exercise being performed.

9. Rest adequately between workouts. Muscle tone develops during these rest periods. Beginners

should work out twice a week and increase gradually to 4 to 5 times per week.

10. Remove all jewellery, including rings, chains and pins before commencing exercise.

11. Always wear suitable clothing and footwear during exercise. Do not wear loose fitting clothing

that could become entangled with the moving parts of your exercise machine.

IMPORTANT!!! THE MAXIMUM RECOMMENDED WEIGHT CAPACITY FOR YOUR 2 in 1 trainer

IS 120KGS.

THIS OWNER’S MANUAL CONTAINS ASSEMBLY, OPERATION, MAINTENANCE AND

SAFETY INFORMATION. IN THE INTEREST OF SAFETY, PLEASE MAKE CERTAIN THAT

YOU READ AND UNDERSTAND ALL THE INFORMATION BELOW.

HARDWARE PARTS LIST

PART NO.

DESCRIPTION

Q’TY

17 ALLAN HEAD BOLT WITH BLUE DOT 2

18 FLAT WASHER 2

19 PLASTIC WASHER 2

20 FLAT WASHER 2

21 WAVY WASHER 2

36 SMALL FLAT WASHER 6

37 ADJUSTMENT KNOB 6

38 BOLT 6

64 NYLON LOCK NUT 2

65 FLAT WASHER 2

66 L & R PEDAL HINGE BOLT (L & R) 2

Parts described above are all the parts you need to assemble this machine. Before you start

to assemble, please check the hardware packing to make sure they are included. Please

note, some items of hardware my be pre assembled.

PRE-ASSEMBLY CHECK LIST

PART NO. DESCRIPTION QTY

NO.1 COMPUTER 1

NO.11-L HANDLE BAR (LEFT) 1

NO.11-R HANDLE BAR (RIGHT) 1

NO.22 HANDLEBAR POST 1

NO.25 BLOW MOVEABLE HANDLEBAR 2

NO.30 SADDLE 1

NO.31 SEAT POST 1

NO.32 HOLLOW 1

NO.35-L FOOTPLATE (LEFT) 1

NO.35-R FOOTPLATE (RIGHT) 1

NO.39-L EDAL(LEFT) 1

NO.39-R EDAL(RIGHT) 1

NO.4 HANDLEBAR 1

NO.58 REAR STABILIZER 1

NO.6 SMALL COVER 2

NO.63 FRONT STABILIZER 1

NO.67 MAIN FRAME 1

ASSEMBLY INSTRUCTION

STEP 1

Attach the front stabilizer (63) to the front of the main frame (67) and secure with two carriage bolts

(57), two curved washers (8), and two acorn nuts (60).

Attach the rear stabilizer (58) to the rear of the main frame (67) securing with two carriage bolts (57),

two curved washers (8) and two acorn nuts (60).

STEP 2

Connect the upper sensor wire (12) from the front post (22) to the lower sensor wire (27).

Ensure the Tension Control Knob is set to number 1. Connect the upper tension cable

(15) to the lower tension cable (26). Please see the next page for a detailed description

of this part of the assembly. Insert the front post (22) into the main frame (67). Secure

using two allen head bolts (28), allen head bolts long (29) two nuts (23) and four curved

washers (8). Do not fully tighten the bolts at this stage.

HOW TO CONNECT TENSION CONNECTOR

Slide the Cable wire from the Upper

Tension Connector in between the

opening on the wire holder on the

Lower Tension Connector.

Pull the Upper Tension Connector

backward and slide the wire through

the slot on the bracket.

Drop the Connector down so the

fitting sits firmly on top of the

bracket.

NOTE: In able to hold the Front Post while connecting the cables and wires，extra help

may be needed.

STEP 3

Attach the handlebar (4) onto the handlebar post (22) and secure into position using 2 allan head

bolts (9) and curved washer (8).

Assemble the handlebar covers (6-1 & 6-2) onto the handlebars and secure into position using 4

small screws (5).

STEP 4

Insert the batteries into the back of the computer (1).

Connect the Hand Pulse Wire and Sensor Wire to the back of the Computer. Mount the Computer

onto the top of the Handlebar Post by sliding the computer onto the bracket.

STEP 5

Assemble the upper movable handlebar right (11-R) onto the handlebar post and secure into

position using 1 wavy washer (21), flat washer (20), plastic washer (19), flat washer (18) and allan

head bolt with blue dot (17).

Repeat the above procedure for the upper movable handlebar left (11-L).

STEP 6

Assemble the left pedal (39-L) onto the left pedal arm (35-L) and secure into position using 3 bolts

(38), small flat washers (36) and adjustment knobs (37).

Assemble the pedal arm assembly onto the main frame and secure using 1 pedal hinge bolt (66-L),

Flat Washer (65), and nylon lock nut (64). Note; the pedal hinge bolts left & right are marked L &

R respectfully. The left hand hinge bolt uses a Left Hand Thread.

Repeat the above procedure for the Right Pedal Arm (35-R).

STEP 7

Assemble the left movable handlebar lower (25) onto the left movable handlebar upper and secure

using 2 allan head bolts (24), curved washers (8) and nylon locknuts (23).

Secure the left movable handlebar to the left pedal arm using allan head bolt (34), steel tube (33),

flat washer (18) and nylon locknut (23).

Repeat the above procedure for the movable handlebar right.

NOTE: Tighten the nuts and bolts previously installed.

STEP 8

Attach the seat (30) onto the seat post (31) and secure using 3 flat washers (18) and nylon lock nuts

(23).

Insert Seat Post into bellows (32) and insert completed assembly into the main frame. Select the

desired height and secure using pull pin (50).

Inhaltsverzeichnis

Andere Marcy Ellipsentrainer Handbücher

Marcy

Marcy ME-704 Bedienungsanleitung

Marcy

Marcy ME-704 Bedienungsanleitung

Marcy

Marcy ER3000D Bedienungsanleitung

Marcy

Marcy EB5100 Bedienungsanleitung

Marcy

Marcy Marcy ER5000D Bedienungsanleitung

Marcy

Marcy ME-704 Bedienungsanleitung

Marcy

Marcy 1201E Bedienungsanleitung

Marcy

Marcy E7000D Bedienungsanleitung

Marcy

Marcy ME-704 Bedienungsanleitung

Beliebte Ellipsentrainer Handbücher anderer Marken

Weslo

Weslo Momentum 4.0 Elliptical Bedienungs- und Wartungshandbuch

Progear Fitness

Progear Fitness Air elliptical pro 1307 Bedienungsanleitung

Torque Fitness

Torque Fitness XPLLP Bedienungsanleitung

Octane Fitness

Octane Fitness PRO3700C Bedienungsanleitung

Xterra

Xterra FS5.8e Bedienungsanleitung

Bodyguard

Bodyguard E-40 Bedienungsanleitung

Bonn Germany

Bonn Germany Concept 2.2 Bedienungsanleitung

Precor

Precor Resolute RSL 620 Bedienungsanleitung

NordicTrack

NordicTrack E 9.2 Elliptical Bedienungsanleitung

Vision Fitness

Vision Fitness X6600iNetTV Bedienungsanleitung

Matrix

Matrix MX-A5x Bedienungsanleitung

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung

Sears

Sears FREE SPIRIT C249 30737 0 Bedienungsanleitung

True

True FS-64 Bedienungsanleitung

Sport-thieme

Sport-thieme ST 310 Bedienungsanleitung

VIRTUFIT

VIRTUFIT CTR 1.1 Bedienungsanleitung

Kettler

Kettler GIRO C 1 Bedienungsanleitung

CIRCLE FITNESS

CIRCLE FITNESS E7 Bedienungsanleitung