Marsden M300 Bedienungsanleitung

M300 BABY SCALE

OPERATION MANUAL

Introduction

Thank you for purchasing a Marsden Professional Medical Scale. This is a precision Class III

Weighing Instrument and considerate use will result in many years of accurate weighing results.

Description

Capacity: 0 ~ 6 kg 6 ~ 15 kg

Division: x 2g x 5g

Power Supply: Marsden mains adaptor

2 x 1.5V AA alkaline batteries

(operating time typically over 300 hours + 1 year standby)

Operating temperature: 5 ~ 35 °C.

Three function keys: On/Zero/Off Tare Hold

Auto-Off function: Adjustable (1 ~ 5 min, Off)

Stabilisation time: 1 ~ 2 seconds

Scale weight: 3.5 kg

Dimensions: 590 mm x 370 mm x 125 mm {TBC}

Approval: Class III {TBC !}

Useage

The scale is designed to measure the weight of a baby placed in the weighing area.

Do not overload the scale.

The scale should only be used in accordance with the supplied operating instructions.

Do not operate the scale in a hazardous environment.

The Service mode, to adjust the calibration of the Baby Scale, is only accessible to the service

agent.

If the tamper-proof seal is broken, then the calibration is not guaranteed and the scale must not be

used until it has been re-calibrated (and sealed) by an authorised service agent.

Declaration of Conformity ?

Power Supply

Either

a) insert two alkaline AA batteries in the battery compartment, taking care to match + and –,

b) connect the mains adaptor lead to the baby scale and plug the mains adaptor to a mains supply,

matching the input voltage marked on the adaptor.

HOLD

NET

On/Zero/Off

button

Stable reading

indicator

Weight or message

display

Tare

button

Zero load

indicator

Battery

level

Hold function active

indicators

Tare function active

indicators

Hold

button

Quick Start

Place the Baby Scale on a firm, level surface. Adjust the feet of the Baby Scale (by rotating) so

that the spirit bubble is in the centre of the circle and all four feet are touching the surface.

Ensure that there is nothing on the Baby Scale and nothing to obstruct its free movement.

Press and hold the On/Zero/Off button for one second

- The Baby Scale turns on, first displaying a segment check pattern then

Place the baby on the scale

- The scale beeps when the weight is displayed.

Pressing the On/Zero/Off button will re-zero the scale. This also turns off the tare

and hold functions. The Baby Scale should only be zeroed with no load present.

- The display shows whilst setting the new zero, then displays

Pressing the On/Zero/Off button for one second will turn the Baby Scale off.

~~~~~~~~~~~~

Tare

If an extra item is to be weighed with the baby, but not included in the weight measurement, then:

Place the extra item (e.g. a towel) on the Baby Scale and press the Tare button

- The display shows whilst measuring, then beeps and displays

- The scale displays the ‘NET’symbol and an arrow beside the Tare button.

Place the baby on the scale - the scale beeps as the baby’s weight is displayed.

Press the Tare button again, or turn the Baby Scale off, to cancel the tare function.

~~~~~~~~~~~~

Hold

If the baby is moving too much for a stable measurement, press the Hold button to select the Hold

function. The hold function may be selected before placing the baby on the scale.

- The display shows until the baby is on the scale and a steady reading is

acquired, then the scale beeps and displays the weight.

- The scale also displays the HOLD symbol and an indicator beside the Hold button.

- This measurement will be held on the display, even if the baby is removed.

- Pressing the Hold button again, or turning the Baby Scale off, will turn off the

hold function.

Battery Level

.kg Mains adaptor power.

.kg Full battery.

.kg Battery OK.

.kg Low battery.

 Very low battery. Measurement disabled until batteries replaced.

~~~~~~~~~~~~

Automatic Power Down

There is no automatic power down when the Baby Scale is powered from a mains adaptor.

Otherwise the Baby Scale will turn off automatically, to preserve battery power.

The automatic power down measures the time elapsed since the last button press or change in

scale load. The automatic power down timeout can be adjusted from the front panel.

Press and hold the Tare button for 8 seconds, until the display shows

When the Tare button is released, the display will show the current auto-off setting.

Repeatedly pressing the Hold button will step the display through the available options:



When the desired setting is displayed, press the Tare button to save the setting and to

return to normal weighing mode.

Troubleshooting

Display off: - try pressing the On/Zero/Off button for at least 2 seconds;

- or disconnect and reconnect the mains supply,

- or replace the batteries ensuring the correct polarity.

Display - this may be caused by external vibrations, wind or air movement.

fluctuating - try turning the scale off and on again, or move the scale to a different location.

- load on scale when it is trying to zero.

- remove load from the Baby Scale

- ensure firm and level surface and free movement.

- negative load on scale when trying to zero –possible obstruction.

- remove load from the Baby Scale

- ensure firm and level surface and free movement.

- the load (including tare) is outside the weighing range.

- If the scale is successfully zeroed and the load is known to be within the weighing

range, then contact your service agent.

- replace batteries.

If the advice above does not clear the fault, then try turning the scale off and on again, or

disconnect and reconnect the supply, or remove and re-fit the batteries.

If the fault is still present, then contact your service agent.

FREEPHONE: 0800 169 2775

HEAD OFFICE:

SALES, SERVICE, MARKETING, ACCOUNTS

ANVIL HOUSE

TUNS LANE

HENLEY ON THAMES

RG9 1SA

Telephone:

0845 130 7330

Fax:

0845 130 7440

E-mail:

[email protected]

NORTHERN OFFICE:

DESPATCH, PRODUCTION, TECHNICAL SUPPORT

Unit 7

Centurion Business Park

Coggin Mill Way

Rotherham

S60 1FB

Telephone:

01709 364296

Fax:

01709 364293

E-mail:

[email protected]

M300 BABY SCALE

SERVICE MANUAL

Service Menu

Service mode can only be selected by breaking the tamper-proof seal, on the underside of the scale, to gain

access to the hidden Service switch.

If the Service switch is pressed whilst the scale is ‘on’, using a suitable tool (e.g. a cocktail stick), then the

scale enters service mode, and the display shows .

The service switch does not need to be pressed again, whilst the scale is in service mode, so the scale can

be replaced on a firm surface.

Selecting service mode cancels both the tare and hold functions.

Repeatedly pressing the Hold button sequences through the service menu:

Calibrate → Gravity → Units → 10x res → HOLD range → HOLD time → Defaults → Corner →…

Display:

Pressing the Tare button selects the displayed service function (see following pages).

 

- Calibration mode

When  is selected, by pressing the Tare button, the display shows the currently stored ‘calibration

gravity’, but to only one decimal place.

The ‘calibration gravity’ is the local gravity where the calibration is performed. Whilst adjusting the

‘calibration gravity’, the top left arrow is illuminated, as a reminder that the display is showing ‘calibration

gravity’.

Each time the Tare button is pressed adds an extra decimal place (up to four decimal places) and, unless

the Hold button is pressed, the display continues to show the currently stored ‘calibration gravity’,

e.g.

If the Hold button is pressed at any stage in this sequence, then it increments the least significant digit

(within the gravity range 9.7800 ~ 9.8299 m/s2) and clears any following digits to zero (subject to the range

restriction). The Tare button is used to proceed to the next digit, e.g.

When the correct ‘calibration gravity’ is displayed (to four decimal places), the Tare button is pressed to start

the calibration.

If a mistake is made, at any time during calibration, then turning the scale off and on again will cancel

service mode without saving any new settings.

Inhaltsverzeichnis

Andere marsden Skala Handbücher

marsden

marsden VS 250E Bedienungsanleitung

marsden

marsden B-100 Bedienungsanleitung

marsden

marsden Jadever JCO Bedienungsanleitung

marsden

marsden M-610 Bedienungsanleitung

marsden

marsden B-400 Bedienungsanleitung

marsden

marsden V-110 Bedienungsanleitung

marsden

marsden Smart Diet Scale Installationshandbuch

marsden

marsden V-180 Bedienungsanleitung

marsden

marsden M-910 Bedienungsanleitung

marsden

marsden M-M-955 Bedienungsanleitung

marsden

marsden MPPS-250 Bedienungsanleitung

marsden

marsden MPMS-300 Bedienungsanleitung

marsden

marsden BFA-220P Bedienungsanleitung

marsden

marsden M-110 Bedienungsanleitung

marsden

marsden Boxer MPS 30 Bedienungsanleitung

marsden

marsden M-900 Bedienungsanleitung

marsden

marsden V-25 Bedienungsanleitung

marsden

marsden MSS-I-400 Bedienungsanleitung

marsden

marsden M-165 Bedienungsanleitung

marsden

marsden M-925 Bedienungsanleitung

marsden

marsden VT-250 Bedienungsanleitung

marsden

marsden B-300 Bedienungsanleitung

marsden

marsden M-510 Bedienungsanleitung

marsden

marsden M-530 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung

marsden M300 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken