Marshall Amplification MG10CD Bedienungsanleitung
MG
SERIES
10CD
Owners Manual
2 CHANNELS
CLEAN
OVERDRIVE
EQ
CONTOUR
CD INPUT
EMULATED
LINE OUT
EMULATED
MG10CD Hbk Multi 230V 25/2/02 4:31 pm Page B
1
From Jim Marshall
I would like to thank you personally for selecting our new MG10CD Combo.
As a musician myself, I fully understand the necessity of achieving the right tone and feel to
help you realise your potential – whether an aspiring beginner or more experienced player. With
this in mind, I set my experienced R&D team the task of designing a new range of affordable MG
amplifiers that truly captured the essence of the Marshall sound.
Utilising new technologies, some of which were developed for the critically acclaimed AVT
range, the new MG Series raises the standard for what can be expected from a value-for-money
range of guitar amplifiers and defines a new benchmark. For example, the power amp section of
your MG10CD boasts FDD (Frequency Dependant Damping) – a radical new feature, exclusive
to Marshall Amplification, that accurately mimics the way an all-valve amp interacts with a
loudspeaker. As a result of FDD, your new MG10CD will give you a width of sound never before
thought possible in such an affordable, non-valve amp.
Whether the MG10CD is your first ever Marshall or is the latest addition to your arsenal of
amps, the tone and feel of this compact, rugged combo will deliver the goods – from bedroom to
backstage!
Like all the amplifiers in my new MG range, the MG10CD was completely designed and
engineered in the UK. The most rigorous quality control procedures ensure that it meets the
standard of build you have come to expect from all Marshall products.
I wish you every success with your new Marshall. Welcome to the family.
Yours Sincerely,
ENGLISH
MG10CD Hbk Multi 230V 25/2/02 4:31 pm Page 1
WARNING! - Important safety instructions
WARNING: This apparatus must be earthed!
APLEASE read this instruction manual carefully before switching on.
BALWAYS use the supplied mains lead, if a replacement is required please contact your
authorised Marshall Dealer.
Note: Closed back equipment with non-detachable mains cord.
When the equipment is not in use or is being transported, the mains
cord should be gathered and retained under the top strap handle to
prevent damage. See diagram.
CNEVER attempt to by-pass the fuses or fit ones of the incorrect value.
DDO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
ERefer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as when the
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally
or has been dropped.
FNEVER use an amplifier in damp or wet conditions.
GALWAYS unplug this apparatus during lightning storms or when unused for long periods of
time.
HPROTECT the power cord from being walked on or pinched particularly at plugs,
convenience receptacles and at the point where they exit from the apparatus.
IDO NOT switch the amplifier on without the loudspeaker connected.
➲
Note: This equipment has been tested and found to comply with the requirements of the EMC
directive (Environments E1, E2 and E3 EN 55103-1/2) and the Low Voltage directive in the E.U.
➲
EUROPE ONLY - Note: The Peak Inrush current for the MG10CD is 2 amps.
➲
CAUTION: Any changes or modifications not expressly approved by the party responsible for
compliance may void the users authority to operate the equipment.
➲
Note: It is recommended that all audio cables used to connect to the MG10CD are of a high
quality screened type. These should not exceed 10 metres in length.
➲ WARNING:
Always ensure free movement of air around the amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A
polarised plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
When the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS !
2
!
ENGLISH
MG10CD Hbk Multi 230V 25/2/02 4:31 pm Page 2
3
1. INPUT jack
Use a good quality guitar (screened) cable to
plug your guitar in here.
2. Clean VOLUME control
When the OD Select switch is ‘out’, this control
adjusts the volume of the Clean Channel. At low
settings the sound will be very clean with a bell-
like ring. Turning this control above half way will
introduce a desirable, bluesy distortion as the
power amplifier is driven into ‘crunch mode’.
3. OD (Overdrive) SELECT switch
Depressing the Overdrive Select Switch will
engage the Overdrive Channel.
4. Overdrive GAIN control
Turning up the Overdrive Gain Control will
increase the amount of distortion generated in
the Overdrive channel. Low gain settings will
produce classic rock and blues tones. Crank the
Gain for fat and aggressive sounds that are
perfect for soloing or hard rock and nu-metal
riffs.
5. Overdrive VOLUME control
Amazingly enough, this control adjusts the
volume of the Overdrive channel!
The louder this channel is set, the ‘looser’ the
amplifier will sound and feel. This behaviour is
exactly what a good all-valve amplifier does and
is a result of our proprietary FDD circuitry.
6. CONTOUR control
This highly effective tone control works on both
the Clean and Overdrive channels. By radically
modifying the mid-range (body), the tone can
range from traditional and woody sounding
(setting at 10), to aggressive, ‘scooped’ and
modern (setting at 0) and all points in-between.
7. CD IN & EMULATED LINE OUT jack
The MG10CD cleverly combines its Line Out
and CD Input functions. If you want to jam to
your favourite CD or tape, merely connect the
headphone output of your CD or tape player
here, adjust the player’s volume to match that of
your guitar and ‘hey-presto’ – you've got the
perfect ‘play-along’ practice system.
Alternatively, you can use this socket to
connect the MG10CD to your multi-track
recording machine and you’ll get a great guitar
sound direct to disk or tape.
HELPFUL HINT: for ‘silent’ recording merely
plug an unconnected jack plug to the headphone
socket and you’ll disconnect the MG10CD’s
internal speaker.
8. EMULATED HEADPHONES jack
Plug your headphones here for a killer speaker
emulated sound! Doing this mutes your
MG10CD's internal speaker for ‘silent’ practice.
9. POWER Switch & LED
The power switch turns your amplifier on and
off. The LED will be lit when your amplifier is on
and will not be lit when the amplifier is switched
off.
Note: Before connecting to the mains
electricity supply, always ensure that your
electricity supply is compatible with your
amplifier, as detailed on the rear panel.
Please ensure the amplifier is switched off and
unplugged from the mains electricity supply
before being moved.
MG10CD Front Panel Features
ENGLISH
1 2 3 4 5 6 7 8 9
MG10CD Hbk Multi 230V 25/2/02 4:31 pm Page 3
16
Technical Specification
Especificaciones técnicas
Technische Daten
Caractéristiques techniques
Technical Técnicas Technische Techniques
Power Output 10W RMS into 8Ω
Potencia de salida 10W RMS sobre 8Ω
Ausgangsleistung 10W RMS an 8Ω
Puissance de sortie 10W RMS sous 8 ohms
10W RMS / 8Ω
Main Guitar • Input Impedance 1MΩ
Impedancia de entrada principal de guitarra 1MΩ
Guitar • Input Eingangsimpedanz 1MΩ
Impédance d'entrée 1MΩ
1MΩ
CD Input • Input impedance 3.3kΩ
Impedancia de entrada de CD 3.3kΩ
CD Input • Eingangsimpedanz 3.3kΩ
Impédance d'entrée CD 3.3kΩ
3.3kΩ
Emulated Output • Level -10dBV
Nivel de salida de línea simulada -10dBV
Emulated Output • Ausgangspegel -10dBV
Niveau de sortie -10dBV
-10dBV
Weight 5.0kg
Peso 5.0kg
Gewicht 5.0kg
Poids 5.0kg
5.0kg
Size (mm) 290mm x 290mm x 180mm
Tamaño (mm) 290mm x 290mm x 180mm
Maße (mm) 290mm x 290mm x 180mm
Taille (mm) 290mm x 290mm x 180mm
290mm x 290mm x 180mm
MG
SERIES
10
CD
MG10CD Hbk Multi 230V 25/2/02 4:32 pm Page 16
Clean
Out
In
In
In
BluesRockMetal
Suggested Settings
Configuraciones que sugerimos
Soundvorschläge
Exemples de Réglages
Marshall Amplification plc
Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England
Tel : [01908] 375411 Fax : [01908] 376118
www.marshallamps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Marshall Amplification plc reserve the right to alter specifications without prior notice.
Here follows four sample settings to act as starting
points from which to develop your own sounds.
N.B. Volume should be adjusted to taste.
230V
MG10CD Hbk Multi 230V 25/2/02 4:31 pm Page A
Inhaltsverzeichnis
Andere Marshall Amplification Verstärker Handbücher
Marshall Amplification
Marshall Amplification VALVETEST AVT100X Bedienungsanleitung
Marshall Amplification
Marshall Amplification DSL 15H Bedienungsanleitung
Marshall Amplification
Marshall Amplification MG15: MG15R Bedienungsanleitung
Marshall Amplification
Marshall Amplification Modefour MF280 Bedienungsanleitung
Marshall Amplification
Marshall Amplification VDA-104-3GS-2 Bedienungsanleitung
Marshall Amplification
Marshall Amplification DSL100HR Bedienungsanleitung
Marshall Amplification
Marshall Amplification Jubillee Bass 3530 Bedienungsanleitung
Marshall Amplification
Marshall Amplification MG250DFX Bedienungsanleitung
Marshall Amplification
Marshall Amplification JCM800 Bedienungsanleitung
Marshall Amplification
Marshall Amplification CODE Bedienungsanleitung
Marshall Amplification
Marshall Amplification JCM800 2203-01 Bedienungsanleitung
Marshall Amplification
Marshall Amplification EL84 20/20 Bedienungsanleitung
Marshall Amplification
Marshall Amplification Acoustic Soloist AS100D Bedienungsanleitung
Marshall Amplification
Marshall Amplification MINI JUBILEE 2525H Bedienungsanleitung
Marshall Amplification
Marshall Amplification MINI JUBILEE 2525C Bedienungsanleitung
Marshall Amplification
Marshall Amplification Acoustic Soloist AS80R Bedienungsanleitung
Marshall Amplification
Marshall Amplification 1922 Bedienungsanleitung
Marshall Amplification
Marshall Amplification JVM410H HEAD Bedienungsanleitung
Marshall Amplification
Marshall Amplification 1959SLP Bedienungsanleitung
Marshall Amplification
Marshall Amplification Transistor Split Channel Bedienungsanleitung
