MASSEY FERGUSON 8792 Bedienungsanleitung

Part Number 4283409M2 (English)

Printed in U.S.A.

November 2010

Massey Ferguson®

8792 / 8776

Planter

SERVICE MANUAL

4283409M2

CONTENTS

GENERAL INFORMATION ....................................................................................................................................01

ROW UNIT ..............................................................................................................................................................02

DRIVE TRANSMISSION.........................................................................................................................................03

AIR SYSTEM ..........................................................................................................................................................04

HYDRAULICS ........................................................................................................................................................05

ELECTRICAL .........................................................................................................................................................06

FRAME ...................................................................................................................................................................07

TROUBLESHOOTING............................................................................................................................................08

CONSOLES AND MONITORS...............................................................................................................................09

4283409M2 01-i

Contents

Massey Ferguson®

8792 / 8776

Planter

SERVICE MANUAL

4283409M2

01 - General Information

Contents

GENERAL INFORMATION

General Information ....................................................................................................................................... 01-1

Serial Number ................................................................................................................................................ 01-2

Serial Number Description (2010 and up) ..................................................................................................... 01-2

SAFETY

Safety Alert Symbol ....................................................................................................................................... 01-3

Safety Messages ........................................................................................................................................... 01-3

Informational Messages ................................................................................................................................. 01-4

Safety Signs ................................................................................................................................................... 01-4

General Operation and Service ..................................................................................................................... 01-5

Operating ................................................................................................................................................. 01-5

Agricultural Chemicals ............................................................................................................................. 01-6

Transporting ............................................................................................................................................ 01-6

Servicing .................................................................................................................................................. 01-7

SPECIFICATIONS

Stack Fold ...................................................................................................................................................... 01-9

General Information ................................................................................................................................. 01-9

8792-36 ................................................................................................................................................... 01-9

8792-38 ................................................................................................................................................... 01-9

8792-40 ................................................................................................................................................... 01-9

8776 ...................................................................................................................................................... 01-10

Air System ............................................................................................................................................. 01-10

Pneumatic Down Pressure .................................................................................................................... 01-10

Hydraulic System .................................................................................................................................. 01-11

Approximate Shipping Weight ............................................................................................................... 01-12

Monitor .................................................................................................................................................. 01-12

Electronic Seed Drive Controller ........................................................................................................... 01-12

Tractor Requirements ............................................................................................................................ 01-13

Maximum Speed ................................................................................................................................... 01-13

INDEX ............................................................................................................................................................. 01-15

Find manuals at https://best-manuals.com

01-ii 4283409M2

Contents

NOTES

Find manuals at https://best-manuals.com

4283409M2 01-1

General Information

GENERAL INFORMATION

FIG. 1: Mounted Stack Fold 12 Row Planter

The stacking toolbar frame design of the 8700 Series

Mounted Stack Fold Planters provides narrow transport

widths and allows folding for transport without emptying

the hoppers. The planters also include low profile, rear

fold markers. The models feature the 8000 Series air

seed metering system for accurate seed singulation and

placement, and are designed for use in conventional,

mulch till or ridge till conditions.

Two basic models are available:

Model 8792, 12 row wide (36, 38, or 40 inch)

Model 8776, 16 row narrow (30 inch)

mWARNING: Pictures in this manual may

show protective shields and guards opened

or removed for illustration purposes. Be

sure all shields and guards are in place

during operation.

This manual was prepared from the latest product

information available at publication time. The Company

reserves the right to make changes at any time without

notice or obligation.

FIG. 1

Q0106765

Find manuals at https://best-manuals.com

General Information

01-2 4283409M2

SERIAL NUMBER

FIG. 2: The serial number plate (1) is found on the rear

of the frame near the blower.

SERIAL NUMBER DESCRIPTION (2010

AND UP)

FIG. 3: Description of the serial number for model year

2010 and up.

(1) Beginning symbol

(2) World Manufacturer Code

(3) Brand Code

(4) Model Identifier (Model number)

(5) Check Letter (0 or used if model identifier is five

digits)

(6) Model Year Code (A=2010, B=2011, C=2012, and

on)

(7) Plant Code

(8) Family Code

(9) Unit Number for the Year

(10) Ending symbol

NOTE: For serial number breaks in this manual, only the

information from the model year code and

following will be given.

FIG. 2

D-16109

FIG. 3

AGC

2 3 4 5 76 981 10

Find manuals at https://best-manuals.com

4283409M2 01-3

Safety

SAFETY

SAFETY ALERT SYMBOL

FIG. 4: The safety alert symbol means ATTENTION!

BECOME ALERT! YOUR SAFETY IS INVOLVED!

Look for the safety alert symbol both in this manual and

on safety signs on this machine. The safety alert symbol

will direct your attention to information that involves your

safety and the safety of others.

SAFETY MESSAGES

FIG. 5: The words DANGER, WARNING or CAUTION

are used with the safety alert symbol. Learn to recognize

these safety alerts and follow the recommended

precautions and safety practices.

mDANGER: Indicates an imminently

hazardous situation that, if not avoided, will

result in DEATH OR VERY SERIOUS

INJURY.

mWARNING: Indicates a potentially

hazardous situation that, if not avoided,

could result in DEATH OR SERIOUS

INJURY.

mCAUTION: Indicates a potentially

hazardous situation that, if not avoided,

may result in MINOR INJURY.

FIG. 4

Saf

FIG. 5

WC1957

Find manuals at https://best-manuals.com

Safety

01-4 4283409M2

INFORMATIONAL MESSAGES

The words IMPORTANT and NOTE are not related to

personal safety, but are used to give additional

information and tips for operating or servicing this

equipment.

IMPORTANT: Identifies special instructions or

procedures which, if not strictly observed, can

result in damage to or destruction of the

machine, process, or its surroundings.

NOTE: Identifies points of particular interest for more

efficient and convenient repair or operation.

SAFETY SIGNS

mWARNING: DO NOT remove or obscure

safety signs. Replace any safety signs that

are not readable or are missing.

Replacement signs are available from your

dealer in the event of loss or damage. The

actual location of the safety signs is

illustrated at the end of this section.

If a used machine has been purchased, make sure all

safety signs are in the correct location and can be read.

Replace any safety signs that can not be read or are

missing. Replacement safety signs are available from

your dealer.

Find manuals at https://best-manuals.com

4283409M2 01-5

Safety

GENERAL OPERATION AND SERVICE

Operating

• Read and understand all the operating and safety

precautions before operating machinery.

• In addition to equipment configuration and design,

hazard control and accident prevention depend on

awareness, concern, prudence and proper training of

personnel in the operation, maintenance, transport

and storage of equipment.

• Always raise implement, shut off tractor engine, set

the parking brake, shift to park position (or neutral)

remove the key and install cylinder lockup channels

before working around the machine.

• Avoid working under the planter. However, if it

becomes unavoidable to do so, make sure planter is

securely blocked and cylinder lockup channels are in

place.

• Do not attempt to lubricate or adjust planter while the

machine is in operation.

• Machinery operation must be performed only by

persons who are responsible and delegated to do so.

• Only the operator must be permitted on the tractor

(unless tractor has a factory-installed instructor seat)

when tractor and planter are moving. Never permit

anyone to ride on the planter.

• Avoid wearing loose-fitting clothing and jewelry.

Always tie up long hair that can be caught in moving

parts.

• Wear personal protective equipment (PPE) such as,

but not limited to, protection for the eyes, lungs, ears,

head, hands and feet when operating, servicing or

repairing equipment.

• Make sure bystanders are clear before operating

tractor or machine.

• Do not leave the tractor or implement unattended

with the engine running.

• Never attempt to operate the planter unless seated in

the operator’s seat on the tractor.

• Tractor must be equipped with a rollover protective

structure (ROPS), and a seat belt. Use seat belt

during operation.

• Make sure the tractor is in good operating condition,

and has adequate braking capabilities.

• Do not dismount from the moving tractor.

• Regulate ground speed to field conditions, and

maintain control at all times.

• Watch for overhead wires or other obstructions when

raising markers, and when moving planter with

marker(s) raised.

• Disconnect and store the planter where children do

not normally play. Stabilize the planter by using

suitable supports, and block the wheels.

• Always lower planter when not in use and relieve

pressure in the hoses and cylinders.

• Do not allow children to ride on, play on, or operate

equipment. Always keep children away from

equipment operating, servicing, and storage areas.

• Do not stand between tractor and planter to install

hitch pin when tractor engine is running.

Find manuals at https://best-manuals.com

01-6 4283409M2

Safety

Agricultural Chemicals

• Ag chemicals can be very hazardous. Improper use

of fertilizer, fungicides, herbicides, insecticides and

pesticides can injure people, plants, animals, soil and

other people's property.

• Always read and follow all manufacturers' instructions

before opening any chemical container.

• Even if you think you know them, read and follow

instructions each time you use a chemical.

• Use same precautions when adjusting, servicing,

cleaning or storing planter as used when installing

chemicals into hoppers or tanks.

• Inform anyone who comes in contact with chemicals

of the potential hazards involved and the safety

precautions required.

• Stand upwind and away from smoke from a chemical

fire.

• Store or dispose of all unused chemicals only in a

manner as specified by the chemical manufacturer.

Transporting

• Use tractor of recommended size and weight to tow

the machine.

• Use good judgment when transporting planter on the

highway. Maintain complete control of machine at all

times.

• Comply with state and local laws governing highway

safety and regulations when moving machinery.

• Always make the necessary safety precautions prior

to transporting machine on public roads.

• Make sure the SMV (Slow Moving Vehicle) emblem is

clean and visible.

• Use flashing warning lights except when prohibited

by law.

• Watch for overhead wires or other obstructions when

transporting the planter with markers raised.

• Always fasten the transport safety chain to the tractor

drawbar and use the retainer on the hitch pin.

• Always install the marker lockup pins before

transporting or parking the planter.

• Always install the wheel cylinder lockup channels

before transporting or parking the planter.

• Vertical Fold Models: Always install wing lockup pins

before transporting or parking planter.

• Do not transport planter in excess of 25 kph (15

mph).

Find manuals at https://best-manuals.com

4283409M2 01-7

Safety

Servicing

• After repairing or adjusting the planter, remove all

tools and parts from the machine before operating.

• When working around discs, be careful to not get cut

on sharp edges.

• Lower the planter to the ground before attempting to

remove a wheel for tire repair.

• Tire changing can be very hazardous and must be

done by trained personnel using proper tools and

equipment.

• Do not re-inflate a tire that was seriously

under-inflated or run flat. Have it checked by qualified

personnel.

FIG. 6: Fluid Leak Detection

Correct hydraulic leaks immediately. All fittings must be

tight and all lines and hoses in good condition. Escaping

hydraulic fluid, under extremely high pressure, can

penetrate the skin and cause blood poisoning Use a piece

of wood or cardboard to detect fluid leaks. If injured by

escaping fluid, see a doctor immediately.

FIG. 6

D-5842a

Find manuals at https://best-manuals.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MASSEY FERGUSON Landwirtschaftliche Geräte Handbücher

MASSEY FERGUSON

MASSEY FERGUSON MF 9100 VE Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON Combines MF 7340 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 8702 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 9516 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF9005 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 1843S Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 1373 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9100 Series Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9316S Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9186 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 9700VER Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF1844 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF5650 Advanced Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF2100 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 2430 Gebrauchsanweisung

MASSEY FERGUSON

MASSEY FERGUSON 9125 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 2300 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF5200 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 1800 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF1474 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF2800 Series Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 9520 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9295 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung

TURF TANK

TURF TANK One+ Bedienungsanleitung