Matrix Fitness MX-E5xc Bedienungsanleitung
1
MX-E5xc SERVICE
MANUAL
2
TABLE OF CONTENTS
SECTION 1: MAINTENANCE PROCEDURE…………….…...3
1. Preventive maintenance schedule……………………..……..…..4
2. Cleaning the grooves………………………………………..........5
SECTION 2: WIRING DIAGRAM INSTRUCTION…...........…6
1. MX-E5xc wiring diagram instruction…………………………….7
2. Console cable wiring diagram ………………….………………..8
3. Pulse sensor wire wiring diagram…………………..……...….….8
SECTION 3: CONSOLE ENGINEERING MODE GUIDE…….9
1. How to enter into the engineering mode?...................................10-11
SECTION 4: TROUBLESHLOOTING…………………………..12
1. No display on the console or the display is dim……………….14
2. No RPM is displayed during the exercise……………………...15
3. All or some of the function keys do not respond…………...….16
4. No resistance change or too hard for pedaling…………………17
5. Feel slipping while pedaling……………………………………18
6. Knocking or creaking noises……………………………………18
7. Heart-Rate-Control function does not work…………………….19
SECTION 5: SOFTWARE UPGRADE PROCEDURE…………..20
1. MX-U5x bike software upgrade SOP….......................................21-22
3
SECTION 1
MAINTENANCE PROCEDURE
4
LubricateAir Shock
InspectCleanV Belt
InspectBelt Grooves
Inspect
Handrail &
Handlebar
InspectCleanHandlebar
InspectCleanDisplay Console
InspectCleanFrame
Inspect
Console Mounting
Bolts
AnnualBiannualQuarterlyMonthlyWeeklyDailyItem
VISION BIKE
PREVENTIVE MAINTENANCE SCHEDULE
5
Caution:
If there is any dust in the grooves of the Poly-V belts and pulleys, noises
will be generated during operation.
Frequency: Every 3 to 4 months.
CLEANING THE GROOVES
Procedure:
1.Remove the Poly-V belts and check
the grooves of the belt for dirt or dust
and clean it if any.
2.Check the grooves in the pulley for
dirt or dust and clean it if any.
3.Check the grooves in the roller pulley
for dirt or dust and clean it if any
6
SECTION 2
WIRING DIAGRAM INSTRUCTION
7
MX-E5xc WIRING DIAGRAM INSTRUCTION
8
P01 : Console cable
P03 : Pulse sensor wire
9
SECTION 3
CONSOLE ENGINEERING MODE GUIDE
10
How to enter into the engineering mode?
1. Press & Hold both “DOWN” and “UP”
at the same time for 3-5 sec. Then, the
dot vision display will show
“MANAGER”
2. Press the " UP or DOWN" to select you
want and press the “SELECT" key enter.
To Store up the parameterSTART
Clean accumulate time and distanceHold MANUAL & RANDOM for 3’S
Enter addressSELECT
Select address or decrease parameterDOWN
Select address or add parameterUP
functionkey name
Engineer mode interpret
Test for factoryENG 1
HR testSERVICE 4
Show accumulate distance & timeSERVICE 3
HW test mode show RPMSERVICE 2
Display testSERVICE 1
Select address or add parameterMANAGER
Function interpretDisplay show
Inhaltsverzeichnis
Andere Matrix Fitness Ellipsentrainer Handbücher
Beliebte Ellipsentrainer Handbücher anderer Marken
Weslo
Weslo Momentum 4.0 Elliptical Bedienungs- und Wartungshandbuch
Progear Fitness
Progear Fitness Air elliptical pro 1307 Bedienungsanleitung
Torque Fitness
Torque Fitness XPLLP Bedienungsanleitung
Octane Fitness
Octane Fitness PRO3700C Bedienungsanleitung
Xterra
Xterra FS5.8e Bedienungsanleitung
Bodyguard
Bodyguard E-40 Bedienungsanleitung
Bonn Germany
Bonn Germany Concept 2.2 Bedienungsanleitung
Precor
Precor Resolute RSL 620 Bedienungsanleitung
NordicTrack
NordicTrack E 9.2 Elliptical Bedienungsanleitung
Vision Fitness
Vision Fitness X6600iNetTV Bedienungsanleitung
Matrix
Matrix MX-A5x Bedienungsanleitung
SportsArt Fitness
SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung
