MATTS S3-W Bedienungsanleitung
HANDLEIDING
USER INSTRUCTIONS
Welcome to the family of S3-W owners! We will guide you to know each function for the right and safe
use of Electric scooters. To ensure your safety, please read this manual carefully before riding and make
sure you are always following the requirements below:
• Fully understand the information in this manual, including but not limited to the relevant instructions, precautions
and warnings.
• Fully understand the operation and contingency measures of electric scooters.
• Be fully aware of warning labels of S3-W electric scooters.
• We will not take any responsibility resulting from the unauthorized modification,failure to use original spare
parts,or installation of components that affect the performance and safety of the scooter.
Please contact the Local Customer Service Center if you have any questions about this bike. We are at
our service at any time. Wish you safe and pleasant riding experience!
SAFETY INSTRUCTIONS
To ensure the safety of you and others, please make sure to observe the following matters:
• Do not ride after you take medications which may affect your riding ability, drink alcohol, or when you are unwell.
• Observe traffc regulations and traffc signs and confirm the surrounding road conditions and scooter conditions at
any time, so as to actively avoid danger.
• Wear safety equipment, such as helmet, and appropriate protective clothing if necessary, such as gloves and boots.
• Perform a basic check each time before riding, so as to confirm the light, brake, tread and tire pressure and check
other parts for looseness or abnormal noise, and regularly go to Local Service Center for maintenance.
• In order to ensure the safety of you and others, please DO NOT use high beam in good lighting conditions. The
continuous use of high beamwill cause the visual disturbance to vehicles and pedestrians on the opposite side,
thus affecting normal driving.
• Please do not make or answer any call during riding, which is likely to cause traffc accidents.
DISCRIPTION OF COMPONENTS AND PARTS
SCHEMATIC DIAGRAM OF COMPONENTS AND PARTS
mirror
Handle Bar
Rear backres
Saddle
Swingram
Motor
Front Fork
Front Tyre
Fender
Headlight
Windglass
DISCRIPTION OF COMPONENTS AND PARTS
DIAGRAM OF INSTRUMENT PANEL
Economical Gear, corresponding to number ”1”
Cruising Gear, corresponding to the number “2”
Sport Gear, corresponding to the number “3”
Winker indicator, flashing in synchronization
with the left and right winker.
High beam indicator, indicating highbeam on.
Parking indicator, indicating the parking state.
Charging
1. Speed display
display current speed.
2. Ambient temperature
Display current ambient temperature
3. driving time
Display Single driving time
4. ODO/TRIP
Total ODO Distance/ TRIP distance
5. Power display bar
Display current battery level
6. Gear display
Display current gear
7. Failure warning display
current failure (motor, controller,
brake, accelerator)
8. Left indicator light
Left indicator for turning
9. READY light
Ready for driving
10. Under-voltage of Battery
Under-voltage warning Display of
current battery
11. Right indicator light
Left indicator for turning
12. Parking gear
Parking de scooter
13. Recover display
Recover current failure
The charge indicating lamp lights up when less
than 10%electricity remains.
The start indicator lights up when the motor
can be started.
normal
sport
eco
READY
OPERATIONGUIDE
DETAILS OF INSTRUMENT PANEL
OPERATIONGUIDE
LEFT START BUTTON RIGHT START BUTTON
1. High/low beam switch button
Press up to turn on the high beam.
Press down to turn on the low beam.
2. Winker button
Dial to the left side to turn on the Left winker.
Dial to the right side to turn on the Right winker.
3. Horn button
Press to make a sound and release to sto
1.Gear shift button
The bike has three(3) Gear modes,
1 “Eco”, 2 “Cruise”, and 3 “Sport”. Dial rightwards for “Eco”, middle for
“normal”and left for “sport”.
2. Headlamp button
Dial up to turn on the headlamp.Turn downward to AUTO to automa-
tically turn on the headlights. The headlights turn on automatically
according to the brightness of the environment.
Dail down to to turn off the headlamp.
3. Parking button
Parking button has two modes: press to park the bike and
parking indicator P goes on; and press again to exit the parking status.
4. Recover button
When the scooter have failure warning on the motor/Controller/Brake/
Accelerator, always press this button, slow driving to nearby service
center for repairs.
OPERATIONGUIDE
HOW TO OPERATE THE SMART REMOTE CONTOL
With the advanced Smart Remote Controller, you can
easily lock or unlock your electric scooter by simply
pressing the button within 50 meters.
1. Unlock
Press the unlock button, and the start button stays on. The
scooter enters into the [Unlocked State].
2. Lock
When the scooter is in the [Static State], press the lock
button, and the start button flashes. The scooter enters the
[Locked State].
3. Remote keyless entry
After unlock the scooter,press this button twice within two(2)
seconds, and the scooter will be in the “Powered” state
without key.
4. Search key
Press this witch within 50m, “Bi Bi” sounds searching the
scooter.
OPERATIONGUIDE
OPEN THE STORAGE BOX AND SADDLE
1. After the scooter stops, turn the handlebar to the far left, ins-
ert the key into the physical handlebar lock, push and rotate it
leftwards to lock the scooter.
Insert the key into the physical handlebar lock, and rotate it
rightwards to unlock the scooter.
2. Insert the key and rotate it leftwards, open the saddle and the
storage box will be opened when you hear a
[Click] sound.
3. Insert the key and rotate it rightwards, to start the scooter for
driving.
OPERATIONGUIDE
OPERATION OF AIR SWITCH / BATTERY CONNECTING
As the protection switch for the main power of electric scooter, the air switch will automatically disconnect to ensure
safety when the scooter circuit is abnormal or the current caused by short circuit exceeds the set safe value.
1. Open the small cap of battery case, plug the
battery cable inside the socket, connecting the
battery with scooter.
2. Air switch ON/OFF
Before open the key,please turn ON this Air switch
in advance.
Notes: In order to protect your safety, please turn
off the air switch when cleaning, storing the
scooter for a long time, or re-moving the battery
pack.
3. Battery case anti-theft lock / unlock
When you put down the battery case into the
scooter, it is locked automatically.
4. Connecting the battery with scooter cable.
5. Unlock and Remove the battery case
Open the small cap of the battery case, unplug the
power cable,Insert the key and rotate it rightwards,
then pull up the battery case with one hand.
RIDING GUIDE
CHECKS BEFORE RIDING
Make sure to check the following items before riding a Electric Scooter, which will guarantee your safety
on the road.
1. Whether the handlebar is stable and flexible when turning.
2. Whether the switches on the right and left handlebars can work normally.
3. Whether the speed accelerator can work normally. Make sure the tire pressure is normal.
The suggested tire pressure is 26-29psi for front wheel and 29-32 psi for rear wheel.
4. Checktiresurface forcracks,damage, wear,and foreignmatterpuncture orattachment
5. Whether the tread depth is sufficient (>0.8 mm).
6. Whether any fault warning light on the instrument panel goes on after being powered.
7. Whether the battery is fully charged.
8. Whether the head and tail lights, brake lights and winkers can work normally.
9. Whether the horn can work normally.
10. Whether the rear mirrors are clean. Adjust them to the appropriate angle.
11. Whether the brake oil is sufficient, and whether the handlebars and brake system can work normally.
12. For any abnormality or operational concern, please contact local Customer Service Center.
Inhaltsverzeichnis
Beliebte Roller Handbücher anderer Marken
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
Carrera
Carrera impel Bedienungsanleitung
Afikim
Afikim Superlight SL-3 Bedienungsanleitung
CareCo
CareCo ZOOM Bedienungsanleitung
Douglas
Douglas Vespa G.S. Bedienungsanleitung
Gazelle
Gazelle with BOSCH System Bedienungsanleitung